ASM ChecklistARCHITECTURAL STANDARDS
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
PROJECT INFORMATION
Project Name:
Applicant/Agent:
NON-RESIDENTIAL STANDARDS I INDUSTRIAL DISTRICTS
COHESIVE DESIGN, NON-RESIDENTIAL STANDARDS (CDs)
If a "N" or "N/A" is checked, please explain in comments.
Y N N/A ID # Description
Date:
OGoal i Articulate building designs to frame and accentuate public spaces
1.10 with pedestrian scale elements and details.
1 1 L U 1 f Goal
ICJ lJ 1.11
0 0 0 1.1A
voor 1oal
.20
0 0 0 1.2A
V 0 0 Goal
1.30
O O O 1.3A
O O O 1.36
Building design should address building scale, mass, form, and use a
variety of materials and architectural features to ensure an aesthetic
contribution compatible with surrounding buildings.
Maintain consistent and contiguous pedestrian environments
across developments. Limit circuitous connections and maintain
clear visibility.
Design building fa4ades to express architectural character and
incorporate the use of design principles to unify developments and
buildings, and relate to adjacent and surrounding uses.
Comply and adhere with all previously required building design
elements that were included as part of a Development Agree-
ment, Conditional Use Permit, and/or other requirements as
part of prior approval.
Incorporate design principles to include rhythm, repetition, framing,
and/or proportion. Applies to all sides of a building fa4ade facing
public roadways, that are visible from residential neighborhoods
or public spaces, or facing the public entry of an adjacent building.
Integrate at least one material change, color variation, or
horizontal reveal for every 12-vertical feet of building fagade;
vertical spacing may be averaged over fagade.
Integrate at least one material change, color variation, or vertical
reveal every 50-horizontal feet of building facade; horizontal
spacing may be averaged over facade elevation.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
Comments
File #
Page 11
Staff
leftC�i1�'i�E IDIA I
IDAHO
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS Page 12
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
BUILDING SCALE, NON-RESIDENTIAL STANDARDS (BSS)
If a "N" or "N/A" is checked, please explain in comments.
V
5
N N/A ID # Description Comments Staff
. .
reinforce a cohesive built environment.
Development should consider the scale of surrounding buildings,
Goal including relationships to existing residential areas, as well as an
2.10 appropriate height, mass, and form scaled for the built environment.
Applies to fagades of development along public roads, public spaces,
and adjacent to residential areas.
Buildings with rooflines 50-feet in length or greater must incor-
porate roofline and parapet variations. Variations may include
step-downs, step -backs, other modulation, or architectural
OO 2.1A features such as cornices, ledges, or columns, and must occur
in total combination for at least 20% of the fa4ade length. May
be averaged over entire fagade, but may not exceed 75-feet
without a break.
Within mixed use areas and for all developments along arterial
roadways, buildings over 1,000 sqft must provide a minimum
O 0 2.11) 20-foot building elevation to include average parapet height,
ridge of a pitched roof, or tower/turret type elements at least
20% in total of overall fagade width.
Incorporate pedestrian -scale architectural features to support an
aesthetic character that contributes to the quality of the build -
Goal ing design and connectivity with the surrounding environment.
OO 2.30 Applies to fagades in developments: visible from arterial or collector
roadways, adjacent to residential developments facing roadways,
facing an adjacent building's primary building entries, and adjacent
to public spaces.
Consistently incorporate at least two (2) architectural features
into the building design that are pedestrian scale, to include:
O0 2.3A fenestration patterns; architectural elements such as ledges,
lighting, or canopies; material or pattern banding; or detailing
(see Pedestrian Scale definition).
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
�E ID1Z IAN,.-
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS Page 13
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
BUILDING FORM, NON-RESIDENTIAL STANDARDS (BFS)
If a "N" or "N/A" is checked, please explain in comments.
Y N N/A ID # Description Comments 'FStaff
Articulate building forms, including but not limited to massing, walls,
and roofs, with appropriately scaled modulations that contribute to
O O Goal the development of aesthetic building designs. Applies to fa4ades
h[J 3.10 in developments: along arterial and collector roadways, adjacent
to residential developments facing roadways, facing public entries
of adjacent buildings, and visible from public spaces.
Incorporate at least one type of the following modulations in the
facade plane, including but not limited to projections, recesses,
and step backs that articulate wall planes and break up building
OO O 3.1A mass. Examples include but are not limited to columns with
trim or accent materials, change in finished material depths,
building overhangs, and inset features and materials such as
false windows or fenestration with architectural accents.
Qualifying modulation must be at least 6-inches in depth, be at
least 8-inches in width or height (whichever is narrowest), and
occur in total for 20% of overall fagade elevation. For buildings
OO O 3.113 with fagades less than 150-feet, horizontal modulation must
occur no less than every 30-feet. For buildings with fagades
greater than or equal to 150-feet, horizontal modulation must
occur no less than every 50-feet.
Incorporate visual and physical distinctions in the building design
Goal that enhance building forms, articulate fagades, identify entries,
O0 3.20 integrate pedestrian scale, and visually anchor the building to the
ground or street level. Applies to building fagades visible from a
public street or public space, and to fagades with public entries.
For at least 30% of applicable facades use any combination of
concrete, masonry, stone, or unique variation of color, texture,
or material, at least 10-inches in height, around the base of
3.2A the building. May alternatively incorporate other architectural
features such as ledges, fagade reveals, ground level fenestra-
tion, raised planters, or landscaping elements within 3-feet of
finished grade.
Where building designs incorporate multiple stories, or multiple
OO O 3.213 floor height equivalents, integrate at least one field or accent
color, material, or architectural feature used on lower stories,
on the upper stories.
Building designs with multiple stories must provide proportion-
OO O 3.2C ally taller ground -level fagades adjacent to public roadways and
public spaces. Provide floor -to -ceiling heights, or floor -to -floor
from 10 to 16 feet.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
(�E IDIAN*-
IDAHO
» Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
BUILDING FORM, NON-RESIDENTIAL STANDARDS (BFS)
If a "N" or "N/A" is checked, please explain in comments.
Page 14
Y N N/A ID # Description
Comments
Building design should establish visual connections that relate internal
Goal
spaces at ground- or street -level with facades adjacent to public
�[J
3.30
roadways, public spaces, and along primary building entries, and that
add visual interest and complexity to the first floor building design.
Use horizontal and/or vertical divisions in wall planes, such as
OO
0
3.3A
ledges, awnings, recesses, stringcourse, molding, joint lines,
or other material types, to frame and accent 30% or more of
total fenestration.
Average 30% fenestration for applicable first floor fa§ade, unless
OO
O
3.31)
specified elsewhere. May also meet fenestration alternative
(see 3.3E). Big box and buildings in industrial districts may limit
applicable fa§ade area to 30-feet around public entries.
Fenestration Alternative: Incorporate doors and windows for at
least 30% of applicable first floor fa§ade, or suggest their inclu-
sion using faux treatments that incorporate at least two of the
OO
O
3.3E
following: material changes, reveals in conjunction with color or
material change, qualifying modulation such as recessed areas,
architectural trellis, awnings and canopies over access areas,
detached structures such as pergola, or similar architectural
features and details.
Building roof types, forms, and elements should provide variation
and interest to building profiles and contribute to the architectural
OO
Goal
identity of the buildings, without creating an imposing scale on
3.40
adjacent uses. Applies to fa§ades: in development along arterial
roadways, visible from residential development, adjacent to public
spaces, facing public entries of adjacent buildings.
For flat roofs, incorporate primary and secondary roof elements
including but not limited to: multiple material types along para-
pets, multiple parapet elevations with at least 1-foot change in
0
0
3.4A
elevation, or modulation of at least 2-feet in the parapet, such as
along entryway overhangs. Qualifying elements must exist for at
least 20%the length of applicable facades. May also incorporate
secondary roof types, such as hip roofs along overhangs.
For sloped roofs, incorporate at least two of any one roof element,
including but not limited to: valleys, ridges, or gables. Qualifying
OO
O
3.46
elements in total must exist for at least 20%of applicable fagade
roof area and be visible from the same fagade elevation. May
also incorporate other roof styles, such as parapet walls over
entryway features.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
(AWE IDIAN-
IDAHO
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
ARCHITECTURAL ELEMENTS, NON-RESIDENTIAL STANDARDS (ASE)
If a "N" or "N/A" is checked, please explain in comments.
Y N N/A ID # Description
000
000
000
ddo
M
0
0
Use proportional architectural elements and detailingto articulate
Goal fagades, and contribute to an aesthetic building character with a high
4.10 level of pedestrian design. Applies to fagades: in development along
public roadways, visible from residential development, adjacent to
public spaces, facing public entries of adjacent buildings.
Design and articulate architectural elements using proportions,
divisions, detailing, materials, textures, and colors and appropriately
4.11 integrate these elements into the building design. Applies to fagades:
in development along public roadways, visible from residential
development, adjacent to public spaces, facing public entries of
adjacent buildings.
Provide building overhangs or other projections such as canopies
which articulate the building fagade and provide temporary
relief from inclement weather. At a minimum, an overhang or
4.113 projection is required within 20-feet of all public entryways,
must be at least 3-feet in depth from the point of entry, and
be least 6-feet in length. Entryways with vestibules or other
permanent enclosed transition space are exempt.
Goal Building designs must not create blank wall segments when visible
4.20 from a public street or public spaces. Consider the treatment at the
base, middle, and top of the fagade.
Use any combination of standards from Building Form, Architec-
4 2A tural Elements, or Material sections to provide pattern, color, or
material variation on all wall segments. Must not exceed 30-feet
horizontally or vertically without building variation.
Goal I Organize building service equipment, including, but not limited to,
4.30 utility, service, and mechanical, away from building entries, roadways,
public spaces, and, where appropriate, from adjacent buildings.
Use and integrate standards from the Architectural Standards
4.3A Manual to screen and conceal service and mechanical equipment.
Landscaping meeting the same intent may also be considered
for utility meters and connections.
4.3B All ground level mechanical equipment must be screened to the
height of the unit as viewed from the property line.
4.3C All rooftop mechanical equipment shall be screened as viewed
from the farthest edge of the adjoining right of way.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
k
Comments
Page 15
Staff
(��E ID1Z IAN,.-
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
MATERIALS, NON-RESIDENTIAL STANDARDS (MAS)
If a "N" or "N/A" is checked, please explain in comments.
Y N N/A ID # Description
Goal Use complementary material combinations that contribute to a
O5.10 cohesive building design. Use materials from the following basic
groups: wood, masonry, concrete, stucco, metal, and glazing.
For buildings with fa4ades that face multiple public roadways
OO O 5.1A and/or public spaces, use consistent material combinations,
material quality, and architectural detailing.
For all facade elevations in industrial districts along arterial and
OO O SAC collector roads or facing public spaces, use at least two distinct
field materials, colors, or material -color combinations on the
building facade (see also Material definitions).
For facade elevations visible from public roadways and along
OO O 5.11) primary building entryways, incorporate an accent material
on the first story.
Distinguish field materials from accent materials through pat-
O O 0 5.1E tern, texture, or additional detail visible from edge of nearest
roadway. Alternate masonry or material courses with relief from
primary plane may count toward this.
Where materials transition or terminate, provide detailing to
OO O 5.1F express the natural appearance of the material. For example,
wrap stone or stone -like products around visible corners to
convey the appearance of mass, and not as a thin veneer.
Non -durable materials, treatments, and finishes that deteriorate
OO 0 5.1G quickly with weather, ultra -violet light, and that are more suscep-
tible to wear and tear are prohibited on permanent structures.
The use of vinyl and ordinary smooth face block, unfinished,
colored, or painted, are prohibited as a field materials for building
OO O 5.1H facades along public roadways, adjacent to public spaces, and
when visible from residential neighborhoods. Smooth face block
may be used as an accent material.
In Industrial Districts, untextured concrete panels and prefabri-
cated steel panels are prohibited as facade field materials facing
arterial and collector roadways, or public spaces, except when
OO O 5.1.1 used with a minimum of two other qualifying field materials and
meeting standard fenestration requirements. Concrete panels
that do not exceed three (3) SQFT without a patterned reveal
or modulation break may be considered textured.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
Comments
Page 16
Staff
CjflEl�IAN,.-
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
MATERIALS, NON-RESIDENTIAL STANDARDS (MAS)
If a "N" or "N/A" is checked, please explain in comments.
Y N N/A ID # Descriotion
Goal U I that I building I d
5.20
O O O 5.2A
B
O 5.2C
Goal
5.30
O O 5.36
for the design.
0 5.2
V
C
Use colors a complement iiung materials an support innova-
tive and good design practices. Applies to building farrades visible
from a public street, public spaces, and pedestrian environments.
Use of subtle, neutral, or natural tones must be integrated with
at least one accent or field material.
Use of intensely saturated colors or fluorescence is prohibited
as a primary material. May be used as an accent material.
Materials or colors with high reflectance, such as some metals
or reflective glazing, must not redirect light towards roadways,
public spaces, or adjacent uses in a way which constitutes a
public nuisance or safety hazard.
Integrate roll -up doors, will -call doors, drive -through doors, and
loading docks into the building design, and locate them in a manner
which does not create pedestrian, drive aisle, or roadway conflicts.
Applies to fa4ades along arterial and collector roadways, and fa4ades
facing public spaces.
For industrial district properties, will -call and roll -up doors are
allowed when integrated into the building design, but loading
docks are prohibited. Consider material variation, transitions,
modulation, and other architectural features and standards
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
SIGNS & LIGHTING, NON-RESIDENTIAL STANDARDS (SLS)
If a "N" or "N/A" is checked, please explain in comments.
Y N N/A ID # DescriK
Intent
r/ O O Goal Use lighting on building exteriors to promote safe pedestrian
ICJ 6.10 environments along roadways, at intersections, and in public spaces.
OO O 6.1A Lighting fixture spacing and height along streetscapes and
roadways must be placed to avoid conflicts with tree plantings.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
Comments
Comments
Page 17
Staff
Staff
Ci1�(IEB,IDIANI_,
"AHO
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
ARCHITECTURAL STANDARDS
DESIGN REVIEW CHECKLIST I NON-RESIDENTIAL
INDUSTRIAL DISTRICTS I CONTINUED
SIGNS & LIGHTING, NON-RESIDENTIAL STANDARDS (SLS)
If a "N" or "N/A" is checked, please explain in comments.
Page 18
Y N N/A ID # Description
Comments
O
O
O
6.113
Use energy -efficient architectural lighting.
Use lighting fixtures that are consistent with other decorative
hardware on the building. For example, select lighting hardware
OO
O
6.1C
with similar color and shape as other building hardware, use
recessed lighting, incorporate uniform spacing, integrate with
other accents and reveals, and coordinate specialty lights with
predominate architectural features.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
(AWE IDIAN-
IDAHO
Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org