05 - Trash Enclosure Approval1
Mandie Brozo
From:Dougal, Lee <LDougal@republicservices.com>
Sent:Thursday, January 7, 2021 9:18 AM
To:Mandie Brozo
Subject:RE: Orchard Park Building 3
Perfect.
Thank you for sending the details over. Based on what you have provided, the approach, enclosure dimensions and site
meet the requirements detailed in our commercial enclosure requirements.
Per Republic Services all enclosure dimensions and approaches have been met per plans attached. We do not stamp
plans per say but rather give approval through e-mail and Republic Services approves of the plans attached.
Lee Dougal
Operations Supervisor
11101 w Executive dr
Boise, Id 83713
e ldougal@republicservices.com
o 208.685.7756 c 208.957.2460
w RepublicServices.com
From: Mandie Brozo <mandie.brozo@cshqa.com>
Sent: Thursday, January 7, 2021 9:06 AM
To: Dougal, Lee <LDougal@republicservices.com>
Subject: RE: Orchard Park Building 3
Note that (mandie.brozo@cshqa.com) is an external email. Report suspicious emails by clicking on “Report
Phishing"
Good morning Lee,
To address your concern about the clear dimension between the gate posts, I have increased the overall enclosure width
to 20’, the center gate posts will be approximately 2’ wide leaving 18’, 9’ clear opening for each container. I have
attached a revised plan for your review. With those revised dimensions, does this enclosure and location meet the
minimum requirements for approval?
Mandie Brozo | CSHQA
2
Architecture – Project Manager
D 208.429.4064
From: Dougal, Lee <LDougal@republicservices.com>
Sent: Thursday, January 7, 2021 7:21 AM
To: Mandie Brozo <mandie.brozo@cshqa.com>
Subject: RE: Orchard Park Building 3
Thanks for sending the plans over.
My only concern is the front gate. With having 2 containers in the enclosure and the internal with being at least 18’
wide, the center post where the doors hinge from is taking away from the overall opening. I see that the measurement
is 18’7”, but the width of the center post might be greater than 7 inches. If you can confirm that the width of the post is
7”, then all is fine. Is there a way to add any more width to each side to guarantee enough width for the truck to service.
Lee Dougal
Operations Supervisor
11101 w Executive dr
Boise, Id 83713
e ldougal@republicservices.com
o 208.685.7756 c 208.957.2460
w RepublicServices.com
From: Mandie Brozo <mandie.brozo@cshqa.com>
Sent: Wednesday, January 6, 2021 4:21 PM
To: Dougal, Lee <LDougal@republicservices.com>
Subject: Orchard Park Building 3
Note that (mandie.brozo@cshqa.com) is an external email. Report suspicious emails by clicking on “Report
Phishing"
Hi Lee,
I am submitting a new Multi-Tenant shop building to the City of Meridian for Design Review and Certificate of Zoning
Compliance. Part of their submittal requirements is approval from Republic services of the location of the trash
enclosure.
3
Attached is the Orchard Park Building 3 site plan showing location of the 18’x12’ trash enclosure for your approval with a
50’ approach for your review. I have also included a typical detail sheet showing the enclosure construction with cane
bolts hold opens and 120° gate openings.
Please let me know if you have any questions.
Thank you for your time.
Mandie Brozo | CSHQA
Architecture – Project Manager
200 Broad St • Boise, ID 83702 | T 208.343.4635 | D 208.429.4064
people who listen • design that speaks
a n e m p l o y e e - o w n e d c o m p a n y