Loading...
07_Type WS1 - wst-m-sAll dimensions are inches (centimeters) unless otherwise indicated. *Weight as configured in example below. Catalog Number Notes Type ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold).Example: WST 100M FT TB LPI WST Series Wattage/source Distribution Voltage Ballast Mounting Options WST High pressure sodium 50S 150S Metal halide 100M Ceramic metal halide 100MHC FT Forward throw MD Medium throw (coated lamp std.) 1 WT Wide throw 120 2082 2402 277 347 TB3 23050HZ4 (blank)Magnetic ballast CWI Constant wattage isolated4 (blank)Surface mount Shipped separately5 BBW Surface mount back box UT5 Uptilt 5 degrees Shipped installed in fixture SF Single fuse (120, 277, 347V)6 DF Double fuse (208, 240V)6 Options (continued)Finish12 Lamp14 DFL Diffusing lens EC Emergency circuit7,8 IBS Internal backlight shield9 PE Photoelectric cell-button type (n/a TB)10 QRS Quartz restrike system7,11 WLU Wet location door for up orientation CSA CSA certified NOM NOM certified4 Shipped separately10 WG Wire guard VG Vandal guard (blank)Dark bronze, textured DSST Sandstone, textured DNAT Natural aluminum, textured DWHG White, textured DBLB Black, textured CRT Non-stick protective coating13 Super Durable Finishes DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white LPI Lamp included L/LP Less lamp 16-1/4(41.2) 7-1/4(18.4) 9-1/8(23.2) Decorative Wall-Mounted Lighting WST METAL HALIDE: 100W HIGH PRESSURE SODIUM: 150W Specifications Length: 16-1/4 (41.2) Depth: 9-1/8 (23.2) Overall Height: 7-1/4 (18.4) *Weight: 30 lbs (13.6 kg) FEATURES & SPECIFICATIONS INTENDED USE— For building- and wall-mounted applications. CONSTRUCTION — Rugged, die-cast, single-piece aluminum housing. Die-cast door frame has a 1/8” thick tempered glass lens. Door frame is fully gasketed with one-piece solid silicone. OPTICS — Segmented reflectors for superior uniformity and control. Reflectors are interchangeable. Three full cutoff distributions available: FT (forward throw), MD (medium throw) and WT (wide throw). ELECTRICAL — Ballast: 50W-150W utilizes a high reactance, high power factor ballast. Metal halide 100W and below is standard with pulse-start technology. Ceramic metal halide lamps are recommended for use in applications where superior color rendition, lumen maintenance and longer lamp life are desired. Quick disconnect plug easily disconnects reflector from ballast. Ballasts are 100% factory-tested. Socket: Porcelain, medium-base socket with copper alloy, nickel-plated screw shell and center contact. UL listed 660W, 600V 4KV pulse rated. Finish: Standard finish is textured dark bronze (DDBT) corrosion-resistant polyester powder finish. Additional architectural colors are available. Striping is also available. INSTALLATION — Universal mounting mechanism with integral mounting support allows fixture to hinge down. LISTINGS — UL Listed (standard). CSA Certified (see Options). Suitable for wet locations (damp location listed in lens-up orientation). WLU option offers wet location listing in up orientation (see Options). IP65 rated. 25°C ambient. WARRANTY — 1-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. OUTDOOR WST_M_S See footnotes for above on page 2. WST_M_S OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 770.922.9000 www.lithonia.com ©2003-2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/11/18 Emergency Option Lamp Compatability Lamp options # of lamps/wattage EC 50S n 150S n 100M n WST Metal Halide, High Pressure Sodium Wall Mounted Lamp Initial lumens Mounting height Metal Halide 10’12’14’16’ 100W MH 8,500 0.95 0.66 0.48 0.37 High Pressure Sodium 50W HPS 4000 0.45 0.31 0.23 0.17 150W HPS 16,000 1.80 1.25 0.91 0.70 Notes 1. When ordered with 35S Wattage, fixture will be shipped Less Lamp (L/LP). 2. Must specify CWI for use in Canada. 3. Optional multi-tap ballast (120, 208, 240, 277V); (120, 277, 347V in Canada; ships as 120V/347V). 4. Consult factory for available wattages. 5. May be ordered as an accessory with prefix “WS”. Must specify finish. 6. Not available with DC options. 7. Maximum allowable wattage lamp included. 8. Not available with QR. 9. Not available with medium throw (MD, MDU, MDU5) distributions. 10. Must be ordered with fixture; cannot be field installed. 11. Not available with EC. 12. See www.lithonia.com/archcolors for additional color options. 13. Black finish only. 14. Must be specified. L/LP not available with MHC. PHOTOMETRY See http://www.acuitybrands.com/products/detail/47616/Lithonia-Lighting/WST/Decorative-Trapezoid/photometry