E1 Photometrics LayoutFIXTURE
DESCRIPTION
MANUFACTURER & PART NUMBER
LOAD IN
VOLTAGE
LAMP TYPE
MOUNTING
LOCATIONS
WATTS
PL1
LED POLE LIGHT
LITHONIA NO.: DSX1 LED - P7-4OK-T2M-208-SPA-DDBXD
183
2O8V
4000K
POLE
DRIVE AISLE
25' MOUNTING HEIGHT
PI-2
LED POLE LIGHT
LITHONIA NO.: DSX1 LED - P8-4OK-T5W-208-SPA-DDBXD
207
2O8V
4000K
POLE
PARKING
25' MOUNTING HEIGHT
CONTRACTOR MAY PROVIDE FIXTURES EQUAL TO THOSE SPECIFIED. SUBSTITUTED FIXTURES MUST MATCH SPECIFIED FIXTURE IN PERFORMANCE (LUMENS, DISTRIBUTION, AND WATTAGE), APPEARANCE, SIZE AND QUALITY.
ALL FIXTURES SHALL BE SUBJECT TO REVIEW BY ENGINEER AT TIME OF LIGHTING FIXTURE SUBMITTAL. CONTRACTOR SHALL PROVIDE FIXTURES INDICATED ON SCHEDULE FOR ANY FIXTURES DEEMED NOT EQUAL BY THE ENGINEER.
A. VERIFY MATERIALS AND FINISHES WITH OWNER PRIOR TO ORDERING. VERIFY MOUNTING HEIGHTS WITH FINISHED DECK, JOIST HEIGHTS, CEILING HEIGHTS PRIOR TO ORDERING AND ALLOW 2 WEEKS FOR DIRECTION.
B. LIGHTING REPRESENTATIVE TO CONFIRM / VERIFY ALL ACCESSORIES TO ENSURE THE CONTRACTOR HAS COMPLETE LIGHTING SYSTEMS.
C. DOWN LIGHTS IN CEILING SOFFITS SHALL HAVE MOUNTING FRAMES WITH A LOWER HOUSING RING OR PROVISIONS TO ACCOMMODATE CEILINGS.
D. COORDINATE LIGHT FIXTURES IN SOFFIT WITH FRAMING CONTRACTOR.
E. LIGHTING REPRESENTATIVE AND ELECTRICAL CONTRACTOR TO VERIFY DIMMING SYSTEM, OCCUPANCY AND DAYLIGHT SENSOR COMPATIBILITY WITH LIGHT FIXTURE.
AVERAGE FOOT CANDLES
MAX
MIN
MAX/MIN
AVERAGE/MIN
1.6 FC
3.5 FC
0.6 FC
5.8:1
2.7:1
C & 0 DEVELOPMENT, INC.
PINE 43 - PAD E SHOPS
26 FEBRUARY, 2020
Scale: 1" = 20'-0"
20019
PHOTOMETRIC PLAN ��
DESIGN REVIEW I E1