180364 Design Review Application - Inglewood Place Subdivision - Residential (3)
Planning Division
DESIGN REVIEW ■ Application Checklist
Community Development Planning Division 33 E. Broadway Avenue, Ste. 102 Meridian, Idaho 83642
Phone: 208-884-5533 Fax: 208-888-6854 www.meridiancity.org
(Rev. 7/25/2017)
All applications are required to contain one copy of the following:
Applicant
(√) Description Staff
(√)
Completed and signed Development Review Application
(If also submitting a concurrent application for Certificate of Zoning Compliance, design
review will be processed along with that application. Therefore, a Development Review
Application is not necessary in this case; just check the Design Review box on the
Development Review Application and submit the information below.)
Completed Architectural Standards Compliance Checklist
(Indicate compliance with all applicable standards to include Commercial, Traditional
Neighborhood or Multi-family Districts, under Non-residential or Residential categories.)
Provide in a narrative letter, how the proposal addresses standards contained in the City of
Meridian Architectural Standards Manual and the Unified Development Code (UDC):
1. Architectural Character:
a. Cohesive Design
b. Building Scale
c. Building Form
d. Architectural Elements
e. Materials
f. Signs and/or Lighting
2. Parking Lots
3. Pedestrian walkways and facilities
A complete set of scaled plans including building elevations, with building materials, colors
and textures, mechanical equipment, and site plans with landscaping.
Reductions of the elevations (8 ½” x 11”) and electronic copies in PDF format
Fee
All requests for design review approval must meet the procedures set forth in UDC 11-5 and the criteria set forth in the “City of
Meridian Architectural Standards Manual”, as applicable.
APPLICATIONS WILL NOT BE ACCEPTED, OR MAY BE RETURNED, IF ALL APPLICABLE ITEMS ON THE CHECKLIST
ARE NOT SUBMITTED.
Project name: Concurrent File #:
Applicant/agent:
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 1
Cohesive Design, ResiDential stanDaRDs (CDRs)
Y N N/A ID #Description Comments Staff
Intent
R1.00
Promote visually aesthetic building designs that incorporate quality
architectural characteristics and establish built environments that
are compatible with existing, planned, and anticipated adjacent
land uses.
Goal
R1.10
Articulate building designs to frame and accentuate public spaces
with pedestrian scale elements and details.
R1.1A
Maintain consistent and contiguous pedestrian environments
across developments. Limit circuitous connections and maintain
clear visibility.
R1.1B Provide pedestrian connections to public spaces.
R1.1C Buildings must orient, frame, and/or direct pedestrian views to
adjacent cultural buildings, parks, and plazas.
R1.1D
Design and orient buildings not to impede access. The build-
ing should enhance the appeal of open space and pedestrian
environments
R1.1E
Incorporate architectural features on all sides of a building
façade facing: the primary entrance(s) of an adjacent building,
public roadways, interior site amenities, and façades that are
visible from public spaces. See Architectural Elements, Building
Form, and Materials sections.
Goal
R1.20
Within multi-family developments, enhance wayfinding and create
a unique identity for each building, by incorporating complimentary
variation in design.
R1.2A
Ensure that no two buildings viewed from a public street or
public space are alike, by varying at least two of the following
for each building: roof pitches, material types, color packages,
structure orientation, or incorporate other unique and identifiable
architectural or landscape element (such as art).
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
RESIDENTIAL STANDARDS | MULTI-FAMILY
PROJECT INFORMATION
Project Name:
Applicant/Agent:
File #
OFFICIAL USEDate:
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 2
BuilDing FoRm, ResiDential stanDaRDs (BFRs)
Y N N/A ID #Description Comments Staff
Intent
R3.00
Emphasize architectural building forms that support compatible
building scales, provide appealing architectural character, and
contribute to the quality of the neighborhood.
Goal
R3.10
Articulate building forms, including, but not limited to, massing, walls,
and roofs, with appropriately scaled modulations that contribute to
the development of visually aesthetic and well articulated building
designs. Applies to building façades visible from a public street or
public spaces.
R3.1A Provide a complementary and proportionate level of design and
detail on all public oriented façades.
R3.1B
Incorporate at least one type of modulation in the façade plane,
including, but not limited to: projections, recesses, and step
backs that articulate wall planes and break up building mass.
R3.1C
For applicable façades equal to or longer than 20-feet, provide
a minimum total modulation area of 20% the horizontal wall
span, with a minimum vertical height of at least 3-feet. Porches
and balconies may count toward this.
R3.1D
Modulation for qualifying projections, pop outs, bays, recesses,
and varied setbacks, must be a minimum depth of 1-foot from
the primary façade plane. A minimum 50% of total modulation
must be visible over permanent barriers, such as berms and
fencing, from described areas.
R3.1E
Use any combination of material type, color variation, banding,
stringcourse, or modulation to clearly distinguish between the
ground level and upper stories.
R3.1F
Incorporate visually heavier and more massive elements or
materials, such as stone or masonry, primarily at the base of
buildings, and lighter elements and materials such as siding,
above. This excludes columns, supports, modulated walls,
architectural features, and roof elements.
Goal
R3.20
Residential designs should articulate façades into smaller components
and break up monotonous wall planes by integrating horizontal and
vertical elements.
R3.2A
Use any combination of material, color, modulation, or other
articulation to delineate and break up wall planes greater than
20-feet by 10-feet or wall planes exceeding 200 total square
feet (whichever is more stringent). Applies to public oriented
building façades visible from a public street or public spaces.
R3.2B
Second-story residential façades may not extend to the front
face of garage bays without additional façade modulation or
additional material types and architectural accents.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
MULTI-FAMILY | CONTINUED
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 3
BuilDing FoRm, ResiDential stanDaRDs (BFRs)
Y N N/A ID #Description Comments Staff
R3.2C
Building façades and structures, including detached garages and
carports, with a projection depth towards the front property
line of more than 30% the primary façade width are not allowed.
R3.2D
Residential buildings with attached units must articulate the
design to differentiate façades of individual units or groups of
units. Must consistently incorporate any two of the following:
modulation, material, or color variation.
Goal
R3.30
Design accessory structures to be compatible with residential build -
ings. Accessory structures include, but are not limited to, sheltered
mailboxes, storage areas, maintenance and recreational facilities,
detached garages and carports, and secondary dwellings.
R3.3A
For an accessory structure, 25% or more of the roof surface
area must utilize a like material or color of a primary structure,
or the structure must share similar roof forms.
R3.3B
For an accessory structure, 25% or more of the non-roof surface
area must utilize a like material of a primary structure. Carports
and other post type construction are excluded if the roof
material complies.
Goal
R3.40
Modulate and articulate roof forms to create building profile interest
and to reduce the appearance of building mass and scale. Applies to
public oriented façades visible from a public street, public spaces,
and pedestrian environments.
R3.4A
Break up roof massing into primary and secondary roof elements
that correspond to horizontal and vertical modulations or divi -
sions in the façade, and denote key architectural elements, such
as entries and porches.
R3.4B For all public oriented façades, provide a complementary and
proportionate level of roof form design and detail.
R3.4C
Align and correlate roof forms including elements over porches
and entries, with the overall building design and use of materi -
als. Examples include but are not limited to: continuation of
roof forms with vertical elements such as columns, piers, and
pilasters, or accenting gable type façades with rafters, corbels,
or distinct material variations from other wall planes.
R3.4D Sloped roofs shall have a significant pitch, to be no less than
5/12 (22-1/2 deg).
R3.4E Sloped roofs must extend at least 12 inches beyond the face
of walls.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
MULTI-FAMILY | CONTINUED
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 4
BuilDing FoRm, ResiDential stanDaRDs (BFRs)
Y N N/A ID #Description Comments Staff
R3.4F
Provide variations in roof profile including but not limited at
least two of the following: two or more visible roof planes;
dormers, lookout, turret, or cornice work such as corbels, spaced
consistently along the façade plane.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
aRChiteCtuRal elements , ResiDential stanDaRDs (aeRs)
Y N N/A ID #Description Comments Staff
Intent
R4.00
Promote attractive residential units that enhance the quality of
neighborhoods and developments by integrating architectural
elements and details with building designs.
Goal
R4.10
Use architectural elements and detailing to add interest and contribute
to an aesthetic building character. Applies to building façades visible
from a public street or public spaces.
R4.1A
Provide detailing that transition or frame façade material changes,
and that integrate architectural elements such as lighting,
doorways and windows. Examples include but are not limited
to: cornice work, decorative caps on brick or stone, decorative
lintels, porch railing, transom light, and shutters.
Goal
R4.20
Strategically locate focal points as key elements within the building
design to enhance architectural character. Applies to building façades
visible from a public street or public space.
R4.2A
Provide details that emphasize focal elements such as building
corners, entries, or unique features. Detail examples include but
are not limited to: quoin or rustication, canopies, and columns,
or using roof lines and modulation to direct views. At least one
focal element is required and must be accented with a contrast
in color, texture, or modulation of the wall or roof plane.
Goal
R4.30
Incorporate windows into all applicable façade elevations and
coordinate their placement and design with other architectural
elements and material standards.
R4.3A
Windows must be provided to allow views to exterior activity
areas or vistas, and must be provided on any façade facing a
pedestrian area or common area used for children's recreation.
R4.3B
Anchor windows and other portals into building wall planes by
integrating proportional detailing such as trim, lintels, shutters,
railing, and ledges into the building design.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
MULTI-FAMILY | CONTINUED
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 5
aRChiteCtuRal elements , ResiDential stanDaRDs (aeRs)
Y N N/A ID #Description Comments Staff
Goal
R4.40
Residential entries and multifamily stairwells must provide convenient
access from parking and pedestrian areas, and be integrated into
the overall site and building design.
R4.4A
Primary building entries must be clearly defined using any unique
combination of architectural elements, materials, or façade
modulation meeting other architectural standards in this Manual.
R4.4B Multifamily structures must provide internal site circulation to
access individual residential units.
R4.4C
Multifamily stairwells must be integrated with the building design
and provide residents protection from inclement weather. Use
materials, modulation, and architectural elements which relate
to and support other standards.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
mateRials, ResiDential stanDaRDs (maRs)
Y N N/A ID #Description Comments Staff
Intent
R5.00
Ensure that materials used for residential development promote
and establish an architectural character that contributes to
the aesthetic qualities of neighborhoods and protects adjacent
property values.
Goal
R5.10
Use complementary material combinations that contribute to a
cohesive building design. Use materials from the following basic
groups: wood, masonry, concrete, metal, and glazing.
R5.1A
For buildings with façades that face multiple public roadways
and/or public spaces, use consistent material combinations,
material quality, and architectural detailing.
R5.1B
Distinguish field materials from accent materials through pattern,
texture, or additional detail visible from edge of nearest roadway.
Alternate masonry or material courses may count toward this.
R5.1C
Where materials transition or terminate, provide detailing to
express the natural appearance of the material. For example,
wrap stone or stone-like products around visible corners to
convey the appearance of mass, and not a thin veneer.
R5.1D
Non-durable materials, treatments, and finishes that deteriorate
quickly with weather, ultra-violet light, and that are more suscep -
tible to wear and tear are prohibited on permanent structures.
R5.1E
Unfinished or colored ordinary smooth face block, untextured
concrete panels, and prefabricated steel panels are prohibited
as a finish material for building façades, except an accent or
secondary field material.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
MULTI-FAMILY | CONTINUED
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 6
mateRials, ResiDential stanDaRDs (maRs)
Y N N/A ID #Description Comments Staff
Goal
R5.20
Incorporate material and color changes as integrated details of the
building design; maintain architectural integrity and promote a
quality appearance and character. Applies to building façades visible
from a public street, public space, and pedestrian environments.
R5.2A
Use a cohesive color scheme featuring a minimum of two field
colors, a trim color, and an accent color or unique material. Garage
door colors must coincide with this scheme or other accents.
R5.2B
For each wall plane area greater than 20-feet in length or height,
and visible from prescribed areas, incorporate at least two distinct
field materials, patterns, or colors in any combination, for at
least 25% of the visible area. Windows or portals with qualifying
accent materials may count toward this requirement, when
meeting overall material requirements for the façade elevation.
R5.2C
Vinyl siding must include a mix of material patterns, including
but not limited to: board and batten, horizontal and vertical lap,
shake, or shingles, and meeting other material requirements.
R5.2D
Masonry as a qualifying accent material must be applied to 50
percent of the available wall length at a minimum height of 24
inches. (Available wall length does not include garage openings.)
Goal
R5.30
Use colors that complement building materials and support innova-
tive and good design practices. Applies to building façades visible
from a public street, public spaces, and pedestrian environments.
R5.3A Use of subtle, neutral, or natural tones must be integrated with
at least one accent or field material.
R5.3B
Use of intensely bright and fluorescent colors, as well as the
widespread use of saturated hues without complementary
colors, materials, and accents, is not allowed.
R5.3C
Materials or colors with high reflectance, such as some metals
or reflective glazing, must not redirect light towards roadways,
public spaces, or adjacent uses in a way which constitutes a
public nuisance or safety hazard.
Goal
R5.40
When practical, organize building service equipment, including, but
not limited to, utility, service, and mechanical, away from building
entries, roadways, public spaces, and adjacent buildings.
R5.4A
All roof and wall mounted mechanical, electrical, communica-
tions, and service equipment must be screened from public view
from the adjacent public streets and properties by the use of
parapets, walls, fences, enclosures, or by other suitable means.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
MULTI-FAMILY | CONTINUED
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
Architectural Standards
D esign R eview C heC klist | R esi D ential
Page | 7
lighting, ResiDential stanDaRDs (liRs)
Y N N/A ID #Description Comments Staff
Intent
R6.00
Integrate architectural lighting as cohesive elements of building
designs that contribute to the atmosphere of the built environ-
ments and enhance safety.
Goal
R6.10
Use lighting on building exteriors to promote safe pedestrian
environments along roadways, at intersections, and in public spaces.
R6.1A Lighting fixture spacing and height along streetscapes and
roadways must be placed to avoid conflicts with tree plantings.
R6.1B Use energy-efficient architectural lighting.
R6.1C
Use lighting fixtures that are consistent with other decorative
hardware on the building. For example, select lighting hardware
with similar color and shape as other building hardware, use
recessed lighting, incorporate uniform spacing, integrate with
other accents and reveals, and coordinate specialty lights with
predominate architectural features.
Note: For a complete list of all Standards, along with photo examples, see the City of Meridian Architectural Standards Manual.
MULTI-FAMILY | CONTINUED
»Last Modified: 02/12/2016. Questions? Contact the Planning Division at 208.884.5533 or www.meridiancity.org
~ This page left intentionally blank ~
ÓParadigm Senior Living Inc. 2019 503-222-6868 1
Development Narrative - Design Review Application
01-03-2020
1: Summary
2: Architectural Standards
1: Summary
On November 12, 2019 the City of Meridian approved the Request for Annexation of 10.29 Acres of land
as C-C (3.76 Acres) and R-15 (6.53 Acres) Zoning Districts; Preliminary Plat Consisting of Eight (8) Building
Lots and One 1) Common Lot on 8.84 Acres of Land in the C-C and R-15 Zoning Districts; and Conditional
Use Permit for a “ Nursing or Residential Care Facility” Consisting of 86 Dwelling Units on 3.48 Acres of
Land in the R-15 Zoning District, by James Petersen, Inglewood Place at Meridian, LLC. Case No(s). H-
2019-0090
The Inglewood Place Subdivision is located at the North East corner of Victory Road and Eagle Road. This
will be a two-phase development. Phase one will be R15 Zoned that will be developed as a Senior Living
Community and phase two will be designated as a C-C Zone which could include uses such as retail,
office or professional. During planning of the project great consideration was taken to provide a quality
development that’s a good fit and contributes to the community. Through this process the design team
has received approval for annexation by the planning department and the city council. We have also
held a neighborhood meeting; our Engineer has personally met with the neighbors and with ACHD.
The proposed development will be Mixed Use which is parallel with the City of Meridian’s
comprehensive plan for this property. We are proposing for the East and Middle parcels to be R-15 and
the West parcel adjacent to Eagle Road to be C-C zoned.
1.A: East Parcel, R-15 Zone
This parcel of the property will be single level duplex’s (14 Units) for Senior Independent Living.
1.B: Middle Parcel, R-15 Zone
This parcel will host a three-level senior living facility for Independent Living (46 Units), Assisted Living
(30 Units) and Memory Care (10 Units). These living areas will be in 4 different wings all connected to a
common core area. This design is visually appealing as it breaks up the mass of a large building and
creates great outdoor open space.
1.C: West Parcels, C-C Zone
The west parcels of the development which will be adjacent to Eagle Road and Victory road is ideal for
commercial use. Below you will see an option for this commercial parcel. We do not have end users in
place for the commercial area and the vision may be different than the conceptual drawings shown. We
ask that the commercial area have flexibility so that we can get the right commercial user at this
location. There will be multiple sidewalks between the commercial and senior living community for
senior’s ease of access to the commercial amenities.
ÓParadigm Senior Living Inc. 2019 503-222-6868 2
2: Architectural Standards
4.1: Architectural Character
4:1:A: Cohesive Design
R1.1 – Great consideration has been taken to allow movement of pedestrians through the site.
Building are oriented to face public streets and open spaces, and no visible façade has been
‘under-designed’.
R1.2 – The townhomes, of which only 3 are adjacent to a public street, come in two color
schemes, and are mirrored to create variety.
4:1:B: Building Scale
The site is laid out in a way where the neighboring homes are adjacent to structures of similar
and 1 story scale. The taller buildings are away from existing homes, and less visible from the
main streets.
4:1:C: Building Form
As is important with any project, we have made sure that no boring facades exist as outlined in
the Design Standards.
4:1:D: Architectural Elements
Details such as brick wainscot, brick caps, trellis, porches / decks and material transitions are all
used in a way to enhance the proposed building’s appearance. The townhomes have patios in
the front, and the Senior Living Facility has an ornate port-cochere.
4:1:E: Materials
Material choices are biased on their lasting qualities and if they fit the Meridian community. Our
pallet is a combination of real brick, quality asphalt shingles and cement fiber siding. It will have
an appropriate layout with brick exceeding the 50% requirement and material or color
transitions often.
4:1:F: Signs and Lighting
We have chosen lighting that matches the design and theme, and will provide appropriate
safety for the residences, while not contributing to light pollution.
4.2: Parking Lots / Pedestrian Walkways and Facilities
Parking lots are broken up to reduce their scale into a more pedestrian friendly environment.
They include may surrounding pathways and the drive aisles are no less than 26’ in width.
VANVAN0102040NORTHPUBLIC
CONNECTION
VICTORY RD
EAGLE ROADPUBLIC ROADMGMTMATCH LINEMATCH LINERETAIL PADSOUTHBBQPavilionRETAIL PADCENTRALRETAIL PADNORTHOFFICE BUILDINGBABABABABABABA111111113331111114441212225566222156137EDGE OF EXISTINGACCESS DRIVE8END OF VINYLFENCE12' GRAVEL DRIVE44END OF VINYL FENCE9999999KEYED NOTESPLANTING NOTESINSTALL CONCRETE PLANTER EDGE, TYPICAL, SEE DETAIL 5/L113121.THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONTACTING ALLUTILITY COMPANIES FOR FIELD LOCATION OF ALL UNDERGROUNDUTILITIES, INCLUDING UTILITY DEPTHS, PRIOR TO ANY EXCAVATION.CONTRACTOR SHALL TAKE SOLE RESPONSIBILITY FOR ANY AND ALL COSTOR OTHER LIABILITY INCURRED DUE TO DAMAGE OF UTILITIES,STRUCTURES, ETC.2.CONTRACTOR SHALL BE RESPONSIBLE FOR BECOMING AWARE OFALL RELATED EXISTING CONDITIONS, UTILITIES, PIPES, AND STRUCTURES,ETC. PRIOR TO BIDDING AND CONSTRUCTION.3.IF CONFLICTS ARISE BETWEEN SITE CONDITIONS ANDCONSTRUCTION DOCUMENTS, CONTRACTOR IS REQUIRED TO CONTACTOWNER'S REPRESENTATIVE FOR RESOLUTION. FAILURE TO MAKE SUCHCONFLICTS KNOWN TO THE OWNER'S REPRESENTATIVE WILL RESULT IN THECONTRACTOR BEING LIABLE TO RECONCILE CONFLICTS TO OWNER'SSATISFACTION.4.THE CONTRACTOR IS RESPONSIBLE TO FURNISH ALL PLANT MATERIALFREE OF PESTS AND/OR PLANT DISEASES AND WITH FULL AND NATURALSHAPE. ALL PLANT MATERIAL IS SUBJECT TO OWNER'S APPROVAL PRIORTO INSTALLATION.5.PRE-SELECTED OR "TAGGED" MATERIAL MUST BE INSPECTED BY THECONTRACTOR AND CERTIFIED PEST AND DISEASE FREE.6.THE CONTRACTOR IS OBLIGATED TO MAINTAIN AND WARRANT ALLPLANT MATERIALS AS SPECIFIED.7.PROVIDE MATCHING SIZES AND FORMS FOR EACH SPECIES OFTREES AND/OR PLANTS TO BE INSTALLED ON GRID OR SPACED IN ROWSAS INDICATED ON DRAWINGS. ALL PLANT MATERIAL TO BE PLANTED INSUCH MANNER AS TO BE EQUALLY SPACED. PLANT LOCATIONS SUBJECTTO ACCEPTANCE BY THE OWNERS REPRESENTATIVE.8.THE LANDSCAPE CONTRACTOR SHALL SCHEDULE PLANTINGOPERATIONS AND TAKE ALL NECESSARY PRECAUTIONS TO AVOIDWINTER, CLIMATIC, WILDLIFE, OR OTHER DAMAGE TO PLANT MATERIAL.9.CONTRACTOR SHALL PLACE A 12" DEEP LAYER MINIMUM OFTOPSOIL TO ALL SHRUB/PERENNIAL PLANTING AREAS. IMPORT TOPSOILAS REQUIRED.10.CONTRACTOR SHALL PLACE A 4" DEEP LAYER MINIMUM OFTOPSOIL TO ALL LAWN/TURF PLANTING AREAS. IMPORT TOPSOIL ASREQUIRED.11.PITS FOR ALL PLANT MATERIAL SHALL BE DUG 3 TIMES THE DIAMETEROF THE ROOT BALL. DEPTH OF PLANT PITS TO BE AS INDICATED INPLANTING DETAILS. EXCAVATED MATERIAL SHALL BE REMOVED FROMTHE SITE.12.TREES LESS THAN TWO-INCH CALIPER MUST BE DOUBLE-STAKEDUNTIL THE TREES MATURE TO A TWO-INCH CALIPER.13.CONTRACTOR TO PRUNE TREES AS DIRECTED BY LANDSCAPEARCHITECT FOR PROPER TREE SHAPING.14.CONTRACTOR TO REMOVE ALL TAGS, TIES AND FLAGGING FROMALL PLANT MATERIAL PRIOR TO SUBSTANTIAL COMPLETION.15.PLANT BACKFILL MIXTURE SHALL BE COMPOSED OF 3 PARTSTOPSOIL TO 1 PART HUMUS, ROTARY MIXED ON-SITE PRIOR TOINSTALLATION.6' HT. ORNAMENTAL METAL FENCE, TYPICAL, SEE DETAIL 1/L1103BERM - APPROXIMATE 1' CONTOURS SHOWN, TYPICAL46' HT. SOLID VINYL FENCE, TYPICAL, SEE DETAIL 2/L1105IRRIGATION EASEMENT - NO TREES TO BE PLANTED WITHIN, SEE PLATMAP.INGRESS/EGRESS EASEMENT, SEE CIVIL PLANS. PLANTS LIMITED TOLOW GROWING SHRUBS, PERENNIALS, AND GROUND COVERSPLACE 3" LAYER OF 1" CRUSHED ROCK OVER EXISTING ACCESSDRIVE. GRADE CRUSHED ROCK TO MATCH FINISH GRADE AT ALLEDGES OF EXISTING ACCESS DRIVE.EXISTING FENCE, FIELD VERIFY.25' STREET BUFFER / LANDSCAPE BUFFER6BUFFERS:·MIN. 25' LANDSCAPE BUFFER FROM PROPERTY LINE ADJACENT TOEAGLE RD AND VICTORY RD·MIN. 25' LANDSCAPE BUFFER BETWEEN DIFFERING ZONE TYPES.PLANTING LIMITED DUE TO SEWER EASEMENT.LINEAL FEET OF STREET FRONTAGE:1,269'ACREAGE DEDICATED TO OPEN SPACE:SENIOR FACILITY0.99 ACRESMULTI-FAMILY (COTTAGES)0.46 ACRES (SEE OPEN SPACE PLAN)STREET TREES·ALONG VICTORY RD AND EAGLE RD:51·RESIDENTIAL:27·TOTAL78NUMBER OF TREES PROVIDED IN COMMON LOTS:·ZONE C-C:45·CENTRAL R-15:50·EASTERN R-15:50MITIGATION FOR REMOVAL OF EXISTING TREES:·NO EXISTING TREES ON SITELANDSCAPE DESIGN STANDARDS7898' O.C.6' SOLID VINYL FENCE26'-0"30"3"12"POST CAPTOP RAIL, 1-1/2" x 5-1/2"PICKETS, TONGUE AND GROVE, 5/8" x 11-3/8"END CHANNELPOST, 5" x 5"BOTTOM RAIL WITH METAL REINFORCING,1-1/2" x 5-1/2"FINISH GRADE12" DIA. CONCRETE POST FOOTINGNOTES:1. DIMENSIONS ARE APPROXIMATE.2. PROVIDE SHOP DRAWINGS TO LANDSCAPEARCHITECT FOR APPROVAL PRIOR TOINSTALLATION.3. COLOR: WHITE WITH EMBOSSED TEXTURE.4. TOP OF CONCRETE CURB 1" ABOVE SOILFINISH GRADE.4"12" DIA. CONCRETEFOOTING8'-0" O.C.1" SQ. PICKET, TYP3-3/4" TYP.UNDISURBED ORCOMPACTED SUBGRADE12"9"+/-FINISH GRADE 6' HT. ORNAMENTAL METAL FENCE1NOTE:1. PRE-FABRICATED FENCE TO BE AMERISTAR,AEGIS II STYLE OR APPROVED EQUAL, ASMANUFACTURED BY AMERISTAR, TULSA, OK.PHONE: 800.321.8724.2. INSTALL FENCE PER MANUFACTURER'S WRITTENINSTRUCTIONS3. ALL STEEL FENCE COMPONENTS TO BE POWDERCOATED, BLACK.5. CONTRACTOR TO SUBMIT SHOP DRAWINGS FORAPPROVAL PRIOR TO INSTALLATION.CONCRETE PATIO/DECK6'-0"6"30"3"2"FENCE OVER CONCRETEPATIO/DECKFENCE OVER LAWN WITHCONCRETE CURBCONCRETE CURB, 6" x 8"L110OVERALLLANDSCAPE PLANREVISIONS:PROJECT NO.INGLEWOOD PLACE SUBDIVISION
3250 EAST VICTORY ROAD MERIDIAN IDAHOLANDSCAPEDATE:SHEET TITLE:SHEET NUMBER:1807712 NOVEMBER 2019ArchitectureInterior DesignLandscape ArchitectureLand PlanningConstruction Management5151 South 900 East, Suite 200Salt Lake City, Ut 84117ph. 801.269.0055fax 801.269.1425www.thinkaec.comThe designs shown and described herein includingall technical drawings, graphic representation &models thereof, are the copyrighted work of ThinkArchitecture, Inc. and connot be copied,duplicated, or commercially exploited in whole orin part without the sole and express writtenpermission from THINK Architecture, Inc.These drawings are available for limited reviewand evaluation by clients, consultants, contractors,government agencies, vendors, and officepersonnel only in accordance with this notice.7 NOVEMBER 2019OVERALL LANDSCAPELA-16858S
T
ATE OF IDAHOLICENSED LANDSCAPE
A
R
CHITE C T **TR
O
Y R SANDERS
Meridian, Idaho2020 Jan 07 PROPOSED BUILDING LOCATION IS AN ESTIMATE BASED ON A CIVIL SURVEY OF THE HEIGHTS AND LOCATIONS OF ADJACENT BUILDINGS. COLORS ARE REPRESENTATIONAL ONLY. FINAL COLORS MAY VARY FROM ABOVE REPRESENTATIONINGLEWOOD PLACETOWNHOMES - MATERIAL BOARD>) 6 "@ >) 6 :64#.’;#2# -’<**# -=# >)26 +%%.#$6 -#. ")E# !"# $%&’# (’ ) *(& $%&’#6 +),% .:’;’<.6*=<#"&# <.6*= >%?%,#$%%& <"# & !"#$%&!’ ()*+C) 6 6 C) 6 C) 6 6- "& 6* "# @64#.’>#2# -’A)0’B6&6 !<# C)26 +%%.#>/#)-6 ! D#).- ( )** ,-’*.’(/#C) 6 C) 6 6- >) 6 "@ >) 6 >) 6 6 ") C/6 !"#’A%%F6 !;#.-)6 G##&+)H I#F J#)-/#.#& J%%&+*,-.*(&/"& 6* "# C) 6 6 C) 6 @64#.’>#2# -’F#.-6*)"’B6&6 !<# C)26 +%%.#$/6-# &%G#%( 0"(’ 1 2’3’(/ ,-’*.’(/4 5 1"!)’*,-’*.’(/ )(. # 6" 7 !!)/"#;")-’<#)2’+#-)"’=%%>6 !?"),,6* +#-)"’=%%>6 !@#.2% - <")-# !"#$%&!’ ()*+
Meridian, Idaho2020 Jan 07 PROPOSED BUILDING LOCATION IS AN ESTIMATE BASED ON A CIVIL SURVEY OF THE HEIGHTS AND LOCATIONS OF ADJACENT BUILDINGS. COLORS ARE REPRESENTATIONAL ONLY. FINAL COLORS MAY VARY FROM ABOVE REPRESENTATIONINGLEWOOD PLACESENIOR LIVING FACILITY - MATERIAL BOARD:64#.’;#2# -’<**# -=# >)26 +%%.#?).-/"@ AB,,#- !"# $%&’#>) 6 >) 6 6 ") 6 >) 6 "@ :64#.’;#2# -’<**# -=# >)26 +%%.#C-#2 D.## !"# $%&’# (’ ) *(& $%&’#>) 6 6 ") 6 +),% .:’;’<.6*=<#"&# <.6*= >%?%,#$%%& <"# & !"#$%&!’ ()*+C) 6 6 C) 6 C) 6 6- >) 6 "@ >) 6 :64#.’;#2# -’<**# -=# >)26 +%%.#$6 -#. ")E# !"# $%&’# (’ ) *(& $%&’#6 "& 6* "# @64#.’>#2# -’A)0’B6&6 !<# C)26 +%%.#>/#)-6 ! D#).- ( )** ,-’*.’(/#C) 6 C) 6 6- "& 6* "# C) 6 6 C) 6 @64#.’>#2# -’F#.-6*)"’B6&6 !<# C)26 +%%.#$/6-# &%G#%( 0"(’ 1 2’3’(/ ,-’*.’(/4 5 1"!)’*,-’*.’(/ )(. # 6" 7 !!)/"#;")-’<#)2’+#-)"’=%%>6 !?"),,6* +#-)"’=%%>6 !@#.2% - <")-# !"#$%&!’ ()*+Exterior Accent ColorExterior Accent ColorExterior Base ColorAccent Roof over portchesExterior Accent ColorExterior Accent Color>) 6 "@ >) 6 >) 6 6 ") C/6 !"#’A%%F6 !;#.-)6 G##&+)H I#F J#)-/#.#& J%%&+*,-.*(&/
Meridian, Idaho2020 Jan 07 PROPOSED BUILDING LOCATION IS AN ESTIMATE BASED ON A CIVIL SURVEY OF THE HEIGHTS AND LOCATIONS OF ADJACENT BUILDINGS. COLORS ARE REPRESENTATIONAL ONLY. FINAL COLORS MAY VARY FROM ABOVE REPRESENTATIONINGLEWOOD PLACEEXTERIOR LIGHTING FIXTURES
! " #$$$%
&
% '$
()%**+%,-. (/%**0#"& )%*12"&3 3#
" 1 1&(%**02"& (%**0#4& (*%),0 5'-. -.67"#"& )%*1 !
" 5
744 5
744 8)("&17 5 4 6 .
# (,*#937
: '-;647
(6 .# "'! " (,*#1
6471
# )** #
1< = &
1
4"' 7 < ),/*(($"6
8<65<6%
&
'((-
>
! 4
?
4@A&((B*(*
3//%,,%,*/
&
% ()(53 ?44 7: & "$&7 %8
?
7 4 "
?
7 $& 7474
: 4 %)5 4 -C7?
& 4 C7?
4 . 7: 4 33
%APPLICATIONS Kichler Lighting’s 120-277V LED small wall pack fixtures provide optically controlled wide spread light distribution designed to replace up to a 70W metal halide luminaire for mounting heights of 10’ to 12’. Typical applications include shipping and storage buildings, parking structures, hotels or office parks.CONSTRUCTION Housing and gasketed doorframe assembly constructed from die-cast aluminum. Housing includes ½” coin plugs with o-rings for surface mounted conduit entry or photocell. Lens is composed of heat and impact resistant borosilicate glass. Tamper-resistant stainless steel hardware. FINISH Fixture housing and doorframe assembly feature a UV stabilized Textured Architectural Bronze™ (AZT) powder coat paint finish. MOUNTING Hinged 2-piece assembly mounts with a mounting plate (with built-in level) directly over a 4” recessed junction box (by others). Mounting height is 10’ to 12’.LED CHARACTERISTICS Color consistent LEDs. Lumen Maintenance: L70 to ≥ 55,000-hours. CRI: 70+ (see chart).OPTICAL DISTRIBUTION Type I distribution, ideal for illumination of parking area and business perimeters.ELECTRICAL 120V-277VAC (50/60 Hz). Integrated surge protection (4kV) is standard. Driver is fully potted.LISTINGS AND CERTIFICATION UL 1598 / CSA 250.0 listed for wet locations; Operating temperature -40° C to +40°; UL 8750; IP65 Rated. Select models are DLC Qualified (see Ordering Matrix). ACCESSORY 16245BK Photocell deactivates light during the day. PROJECT:TYPE:ORDERING:COMMENTS:C-Series LED120V-277V LED Traditional Wall Pack, 19W16231®+LIMITED WARRAN T Y +SE E K IC HLER.COM/WARRANTY5YEAR
DRYERWASHERSHELVES15" R&SSHELVES 15" R&S
W.C.SHELVES15" R&SSHELVES15" R&SW.C.WASHERSHELVES15" R&SW.C.RANGERANGE
DW
DWDRYER3
3
AA
BB
5
5
4
4
1
1
2
2
MECH
MASTER BATH
MECH
BEDROOM
BATH
GARAGE
KITCHEN
LIVING
MASTER BEDROOM
LIVING
DINING
KITCHEN
FLEX
MUD
GARAGE
LOGGIA
VERANDA
LOGGIA
VERANDA
FLEX
BATH
1
A301
1
A301
1
A302
1
A302
2
A301
2
A301
2
A302
2
A302
C C
C
E
B
C
A
A701 5
6
A701 31
2
4
A702 31
2
4
A702
5
6
A702
7
8
9
A201
1
A2012
A202
1
A202 2
64'-0"
17'-0"14'-0"15'-0"18'-0"
16'-0"1'-0"56'-0"2'-0"6'-0"48'-0"5'-6"10'-6"15'-0"15'-0"12'-6"5'-6"3'-0"53'-0"7 1/4"3'-0"3'-4 3/4"7 1/4"5 1/2"1 3/4"11'-9"7 1/4"4'-10 3/4"7 1/4"7 1/4"4'-10 3/4"7 1/4"7 1/4"5'-0"7 1/4"9'-9 1/2"7 1/4"7 1/4"12'-3 1/2"7 1/4"4'-6"7 1/4"3
A501
3
A501
3
A501
3
A501
3
A501
G0035
G003
3
G003
4
G003 6
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LIGHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
HATCH PATTERN DESCRIPTION
FLOOR PLAN LEGEND
POURED IN PLACE
CONCRETE WALL
CARPET FINISH
HATCH PATTERN DESCRIPTION
WOOD STUD WALL
STONE VENEER
CMU BLOCK WALL
METAL STUD WALL
TILE FINISH
EXTERIOR CONCRETE SLABS
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:59:20 PMINGLEWOOD SENIOR LIVING TOWNHOMESMERIDIAN SENIOR LIVINGJan 7, 2020
18077
LEVEL 1 FLOOR PLAN
A103
CONSTRUCTION DOCUMENTS -DECEMBER 20, 20191/4" = 1'-0"A103
LEVEL 1 - FLOOR PLAN 1
KEYNOTE INSTRUCTIONAL
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEER
LEVEL 1 -FLOOR PLAN
100'-0"
LEVEL 1 -FLOOR PLAN
100'-0"
UPPER ROOF BEARING
110'-0"
UPPER ROOF BEARING
110'-0"
3 54122
A301
2
A302
15
A502
15
A502
7
A502
7
A502
3
A501
14
A502
1
A501
1
A501
3
A501
11
A502
2.
A502
12
A502
10'-0"LEVEL 1 -FLOOR PLAN
100'-0"
LEVEL 1 -FLOOR PLAN
100'-0"
UPPER ROOF BEARING
110'-0"
UPPER ROOF BEARING
110'-0"
AB1
A301
1
A302
15
A502
7
A502
22
A501
3
A501
A502
20
8
A502
7
A502
3
A501
22
A501
7
A502
15
A502
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:59:20 PMINGLEWOOD SENIOR LIVING TOWNHOMESMERIDIAN SENIOR LIVINGJan 7, 2020
18077
EXTERIOR ELEVATIONS
A201
CONSTRUCTION DOCUMENTS -DECEMBER 20, 20191/4" = 1'-0"A201
SOUTH ELEVATION 1
1/4" = 1'-0"A201
EAST ELEVATION 2
KEYNOTE INSTRUCTIONAL
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEER
LEVEL 1 -FLOOR PLAN
100'-0"
UPPER ROOF BEARING
110'-0"
354 122
A301
2
A302
7
A502
2.
A502
14
A502
15
A502
7
A502
14
A502
14
A502
17
A502
A502
20
A502
20
3
A501
17
A502
10
A501
LEVEL 1 -FLOOR PLAN
100'-0"
UPPER ROOF BEARING
110'-0"
A B1
A301
1
A302
15
A502
15
A502
7
A502
7
A502
A502
20
8
A502
14
A502
7
A502
7
A502
A502
20
A502
19
15
A502
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:59:21 PMINGLEWOOD SENIOR LIVING TOWNHOMESMERIDIAN SENIOR LIVINGJan 7, 2020
18077
EXTERIOR ELEVATIONS
A202
CONSTRUCTION DOCUMENTS -DECEMBER 20, 20191/4" = 1'-0"A202
NORTH ELEVATION 1
1/4" = 1'-0"A202
WEST ELEVATION 2
KEYNOTE INSTRUCTIONAL
SHELVES15" R&SKOHLERW.C.
W/D
15" R&S15" R&S
KOHLERW.C.
KOHLER
W.C.WASH/DRYERKOHLERW.C.RANGE
DW15" R&S15" R&SKOHLER
W.C.KOHLERW.C.KOHLERW.C.KOHLERW.C.KOHLERW.C.SHELVES15" R&SKOHLER
W.C.
W/D15" R&S15" R&SSHELVES15" R&SKOHLER
W.C.
W/D 15" R&S15" R&SWASH/DRYERKOHLERW.C.RANGEDW 15" R&S15" R&S
KOHLERW.C.W/DSHELVES15" R&SDWW.C.KOHLERW.C.W.C.KOHLERW.C.KOHLERW.C.KOHLER
W.C.
KOHLER
W.C.FIREPLACEW/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.KOHLERW.C.KOHLERW.C.1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LIGHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
HATCH PATTERN DESCRIPTION
FLOOR PLAN LEGEND
POURED IN PLACE
CONCRETE WALL
CARPET FINISH
HATCH PATTERN DESCRIPTION
WOOD STUD WALL
STONE VENEER
CMU BLOCK WALL
METAL STUD WALL
TILE FINISH
EXTERIOR CONCRETE SLABS
3
3
I I
A A
A206 4
A202
1
A203
3
A202 2
A202
3
A206
1
A203
1
A203 2
2
A301A
2
A301A
1
A301A
1
A301A
1
A302A
1
A302A
2
A302A
2
A302A
1
A301B
MEMORY CARE
ASSISTED LIVING
MAIL
102
MECH
117
DRY STRG
122
1
1
C C
E E
B
H
2
A301B
BA
1
A306A
2
A306A
10'-2 3/4"10'-0 3/4"37'-4"10'-7 1/4"48'-5 1/2"10'-7 1/4"13'-10 1/8"
2
2
1'-1 1/4"5'-3 3/4"2'-6"10'-5"2'-6"3'-8"3'-8"2'-6"3'-5 1/4"5'-10 3/4"2'-6"2'-6"5'-4"5'-4"2'-6"2'-6"5'-10 3/4"4'-1 1/4"2'-6"4'-0"6'-9 1/4"2'-6"3'-10 3/4"5'-8"2'-6"2'-6"5'-4"5'-4"2'-6"2'-6"6'-1 1/4"162'-0"8'-0"48'-0"27'-0"3'-0"
103'-4 3/8"
G 2'-0"4'-8"51'-4"45'-0"29'-8"29'-4"58'-0"2'-0"2'-0"41'-0"33'-8"29'-4"45'-0"13'-0"162'-0"2
A305B
A A
A B A A A B
A A
A B A A B A A B A
A A
B A
A A B A
A A
A B A A B A
A A
B A A B A A B A
A B A A B A
B B B B
A
B
A
A
B
A
A B A
A B A
A B A
A B A
A B A
A B A2'-0"2'-0"2'-0"3'-0"1'-0"2'-0"-
---
5'-1 3/4"2'-6"2'-6"4'-8 1/4"5'-1 3/4"2'-6"2'-6"5'-1 3/4"4'-8 1/4"2'-6"2'-6"4'-8 1/4"5'-1 3/4"2'-6"2'-6"5'-1 3/4"4'-8 1/4"2'-6"2'-6"5'-1 3/4"4'-8 1/4"2'-6"2'-6"5'-11 7/8"4'-11"2'-6"2'-6"5'-1 3/4"4'-11"2'-6"2'-6"5'-1 1/2"24'-0"5'-11 1/4"15'-0 3/4"15'-0 1/2"14'-7 1/2"141'-1 5/8"7'-5"15'-2"13'-0"24'-4 3/4"9'-7 1/4"32'-5 1/2"10'-7 1/4"45'-7 1/4"
37'-9 1/4"
6'-1"6'-1"4'-0"2'-6"2'-6"30'-0 1/2"2'-6"2'-6"3'-11 1/2"3'-3"2'-6"7'-9"7'-9"2'-6"3'-3"
13'-0 3/4"14'-10"15'-4 1/2"14'-3 1/2"15'-3 1/2"14'-11"15'-7 1/8"
3'-10 3/4"2'-6"3'-8"3'-8"2'-6"10'-5"2'-6"9'-0"2'-6"6'-9"4'-0"2'-6"4'-1 1/4"5'-10 3/4"2'-6"2'-6"10'-8"2'-6"2'-6"11'-4"2'-6"2'-6"5'-6 3/4"4'-1 1/4"2'-6"4'-0"6'-9"2'-6"4'-1 3/4"
UNIT
A102
UNIT
A104
UNIT
A106
UNIT
A108
UNIT
A110
UNIT
A112
UNIT
A101
UNIT
A103
UNIT
A105
UNIT
A107
UNIT
A109
UNIT
A111
CORRIDOR
118
UNIT
M110
UNIT
M109
UNIT
M108
UNIT
M107
UNIT
M106
UNIT
M105
UNIT
M104
UNIT
M103
UNIT
M102
UNIT
M101
OFFICE
115
STRG
116
STAGE KITCHEN
113
MC TUB
109
MC LINEN
110
MC RR
112
MC ACTIVITY
114
CORRIDOR
111
MEDS
105 RES. SERVICES
106
LAUNDRY
107
WOMENS
104
MENS
103
MAID
121
KTCHN OFFICE
120
STAIRS
119
20'-4"3'-8"6'-1"8'-3"9'-8"38'-0"9'-2 3/8"6'-11"
-
---
CORRIDOR
108
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA A
1/7/2020 3:41:02 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 1 FLOOR PLAN
A101A
ANNEXATION SUBMITTALKEYNOTE INSTRUCTIONAL
1/8" = 1'-0"A101A
LEVEL 1A - FLOOR PLAN 1
KOHLERW.C.SHELVES15" R&SW.C.
W/D
SHELVES15" R&SDWMAIL BOX
MAIL BOX
?OVENOVEN
WELLWORTHKOHLERW.C.FIREPLACEFIREPLACEWELLWORTH
KOHLER
W.C.MAIL BOXKOHLERW.C.KOHLERW.C.UP
HATCH PATTERN DESCRIPTION
FLOOR PLAN LEGEND
POURED IN PLACE
CONCRETE WALL
CARPET FINISH
HATCH PATTERN DESCRIPTION
WOOD STUD WALL
STONE VENEER
CMU BLOCK WALL
METAL STUD WALL
TILE FINISH
EXTERIOR CONCRETE SLABS
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LIGHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
3
3
4
4
I
A A
-
F F
-
A206
3
A206
1
2
A305A
2
A305A
1
A305A
1
A305A
1
A301B
B B
H H
2
A301B
CBA
2
A307A
1
A305B
1
A305B
D D
G G121'-0"11 1/4"
8'-4 1/2"
11 1/4"
4"
11 1/4"
7'-9"
11 1/4"
4"
11 1/4"
8'-4 1/2"
11 1/4"
20'-2 1/2"
11 1/4"
9'-4 5/8"
11 1/4"
3"
11 1/4"
8'-8"
11 1/4"
4"
11 1/4"
8'-8"
11 1/4"
4"
11 1/4"
9'-3 5/8"
11 1/4"
25'-9"4'-0"10'-10 1/2"3'-11 3/8"
22'-6 1/8"43'-10"5'-3"2'-6"5'-3"9'-8 3/4"6'-6 7/8"
1
A303B
2
A305B
1
A304C
2
A304C
A A
A A A A
A
A
3'-8 1/2"3'-6"12'-3"95'-2 3/8"
15'-1 1/2"15'-6"
2
A303C
89'-0 7/8"6'-6 7/8"
-
---
IL DINE
124
PRIVATE DINE.
135
BISTRO
136
AL DINE
137
AL LOUNGE
138
MENS
103
MAIL
102
LOBBY
101
C STR
141
LOUNGE
142
IL LOUNGE
140THEATER
139
KITCHEN
123
STRG
125
-
---
LOBBY VEST.
100
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA B
1/7/2020 3:41:09 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 1 FLOOR PLAN
A101B
ANNEXATION SUBMITTALKEYNOTE INSTRUCTIONAL
1/8" = 1'-0"A101B
LEVEL 1B - FLOOR PLAN 1
RANGEDWW/D W.C.RANGEDWW/DW.C.RANGEDWW/DW.C.RANGEDWW/DW.C.RANGEDWW/DW.C.SHELVES15" R&SW/DW.C.15" R&S
15" R&SW.C.RANGEDWSHELVES15" R&SW/DW.C.15" R&S15" R&SW.C.RANGEDWSHELVES15" R&SW/DW.C.15" R&S15" R&SW.C.RANGEDWRANGEDWW/D W.C.RANGEDWW/D W.C.LOCKERSKOHLERW.C.KOHLERW.C.
KOHLER
W.C.WASHDRYCARTFOLDINGCART
CART
SHELVES15" R&S
W/D KOHLERW.C.15" R&S15" R&S
RANGEDWSHELVES15" R&SW/D
KOHLERW.C.15" R&S15" R&SRANGEDWSHELVES15" R&S
W/D KOHLERW.C.15" R&S15" R&S
RANGEDWSHELVES15" R&SW/D
KOHLERW.C.15" R&S15" R&SRANGEDWUP
4
4
A A
F F
J J
A2062
A206
3
A204
3
A2042
A204
1
A205
3
A2052
A205
1
2
A303A
1
A303A
2
A304A
2
A304A
1
A304A
1
A304A
INDEPENDENT LIVING
INDEPENDENT LIVING
CB
1
A307A2
A307A
-
---
5
6
7
7
8
8
D D
168'-0"168'-0"4'-0"23'-6 1/2"26'-9 1/2"4'-8"4'-0"4'-0"50'-4"8'-8"4'-8 3/4"4'-6"7'-10"2'-6"4'-8"4'-8"2'-6"7'-10"4'-6"4'-3 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"3'-0"5'-9 1/2"2'-6"2'-9"5'-6"3'-0"5'-6"6'-1"6'-7 1/2"
1
A303B
1
A303C
1
A304C
2
A304C 9'-0"41'-4"8'-8"A
A A A A A B A A A
A B
C C
CCAAABAAAA
A A A A A A A A A B A
CC
BA
AAABAAAAA8'-4"5'-1 1/2"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"10'-8 3/8"48'-0"23'-11 1/4"6'-0 3/4"7'-11 3/4"14'-0"12'-5 3/4"
9'-4 3/4"30'-0"9'-0"9'-0"15'-2 3/4"6'-0 3/4"23'-11 1/4"10'-2 3/4"
6'-10 1/2"2'-2 1/4"7'-9"2'-6"4'-11"4'-8"2'-6"7'-10"8'-9 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"2'-10"5'-9 1/2"2'-6"2'-11"5'-6"3'-0"5'-6"6'-1"6'-4 3/4"
123'-9 1/4"
4'-10 3/4"4'-6"7'-10"2'-6"4'-8"4'-8"2'-6"7'-10"4'-6"4'-6"4'-6"4'-6"7'-10"2'-6"4'-10 3/4"3'-0 3/4"3'-0"5'-11"2'-6"6'-4"2'-6"2'-6"4'-2 1/4"
4'-11 1/4"2'-6"7'-9 1/2"3'-6 1/2"5'-2 3/4"5'-0 3/4"10'-2"4'-8"4'-1 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"3'-0"3'-0 3/4"2'-8 3/4"2'-6"2'-9"5'-6"3'-0"5'-6"6'-1"5'-2 3/4"1'-2"
11'-0"9'-0 3/4"30'-2"9'-2 3/4"23'-5 3/4"14'-0 1/2"14'-0"12'-5 3/4"10'-3 1/4"
123'-5 1/2"
10'-11"2"9'-2 3/4"30'-0"32'-8 1/2"14'-0 1/2"14'-0"12'-8 1/2"
-
---
2
A303C
4'-6 1/2"-
---4'-0"-
---
-
---63'-0"42'-0"63'-0"4'-0"23'-6 1/2"19'-5 1/2"16'-0"3'-8 1/2"3'-6"5'-8 5/8"6'-6 3/8"-
---
LAUNDRY
127
STAFF
128
ART
131
MAID
132
MENS
133
WOMENS
134
CORRIDOR
143
STAIRS
126
STRG
125 STAIRS
129
STRG
146
VEST
145
CORRIDOR
144
UNIT
N114
UNIT
N112
UNIT
N110
UNIT
N113
UNIT
N111
UNIT
N109
UNIT
N108
UNIT
N106
UNIT
N104
UNIT
N102
UNIT
N107
UNIT
N105
UNIT
N103
UNIT
N101
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LIGHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA C
1/7/2020 3:41:15 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 1 FLOOR PLAN
A101C
ANNEXATION SUBMITTAL1/8" = 1'-0"A101C
LEVEL 1C - FLOOR PLAN 1
SHELVES15" R&SKOHLERW.C.
W/D
15" R&S15" R&S
WASH/DRYERKOHLERW.C.RANGE
DW15" R&S15" R&SKOHLER
W.C.SHELVES15" R&SKOHLER
W.C.
W/D15" R&S15" R&SSHELVES15" R&SKOHLER
W.C.
W/D 15" R&S15" R&SWASH/DRYERKOHLERW.C.RANGEDW 15" R&S15" R&S
KOHLERW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.SHELVES15" R&SDWW/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.A A
F F
A206 4
A202
1
A203
3
A202 2
A202
3
A206
3
A206
1
A203
1
A203 2
2
A301A
2
A301A
1
A301A
1
A301A
1
A302A
1
A302A
2
A302A
2
A302A
1
A301B
1
1
C C
B B
2
A301B
BA
1
A306A
2
A306A
A306A
5
D D
140'-8 1/4"
10'-2 3/4"3'-10 3/4"2'-6"3'-8"3'-8"2'-6"2'-6"7'-11"2'-6"9'-0"2'-6"2'-6"4'-3"4'-0"2'-6"4'-1 1/4"5'-10 3/4"2'-6"2'-6"5'-4"5'-4"2'-6"2'-6"5'-8"5'-8"2'-6"2'-6"5'-6 3/4"4'-1 1/4"2'-6"4'-0"6'-9"2'-6"4'-1 3/4"
133'-9 1/8"
1'-1 1/4"5'-3 3/4"2'-6"10'-5"2'-6"3'-8"3'-8"2'-6"3'-5 1/4"5'-10 3/4"2'-6"2'-6"5'-4"5'-4"2'-6"2'-6"5'-10 3/4"4'-1 1/4"2'-6"4'-0"6'-9"2'-6"3'-11"5'-8"2'-6"2'-6"5'-4"5'-4"2'-6"2'-6"16'-1 1/8"58'-0"2
A305B
A A
A B B A A A B A
A A
A B A A B A A B A
A A
B A
ABAABAAB
AA
ABAABA
AA
ABAA 2'-0"2'-0"2'-0"2'-0"-
---
10'-2 3/4"10'-0 3/4"37'-4"10'-7 1/4"48'-5 1/2"10'-7 1/4"13'-4 3/4"
1'-1 1/4"24'-4 3/4"9'-7 1/4"32'-5 1/2"10'-7 1/4"56'-0 5/8"2'-0"4'-8"6'-4"16'-6"2'-11 1/2"25'-6 1/2"A
51'-4"4'-8"2'-0"-
---
UNIT
A202
UNIT
A204
UNIT
A206
UNIT
A208
UNIT
A210
UNIT
A212
UNIT
A201
UNIT
A203
UNIT
A205
UNIT
A207
UNIT
A209
UNIT
A211 MECH
204
STAIRS
219
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRI OR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LI GHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
HATCH PATTERN DESCRIPTION
FLOOR PLAN LEGEND
POURED IN PLACE
CONCRETE WALL
CARPET FINISH
HATCH PATTERN DESCRIPTION
WOOD STUD WALL
STONE VENEER
CMU BLOCK WALL
METAL STUD WALL
TILE FINISH
EXTERIOR CONCRETE SLABS
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA A
1/7/2020 3:41:21 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 2 FLOOR PLAN
A102A
ANNEXATION SUBMITTAL1/8" = 1'-0"A102A
LEVEL 2A - FLOOR PLAN 1
KEYNOTE INSTRUCTIONAL
SHELVES15" R&SW.C.
KOHLER
W.C.
KOHLER
W.C.
KOHLER
W.C.KOHLERW.C.KOHLERW.C.KOHLERW.C.U.C.FRIDGEKOHLERW.C.U.C.FRIDGEW/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.W/DSHELVES15" R&SDWW.C.UP
HATCH PATTERN DESCRIPTION
FLOOR PLAN LEGEND
POURED IN PLACE
CONCRETE WALL
CARPET FINISH
HATCH PATTERN DESCRIPTION
WOOD STUD WALL
STONE VENEER
CMU BLOCK WALL
METAL STUD WALL
TILE FINISH
EXTERIOR CONCRETE SLABS
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LIGHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
3
3
4
4
1
A304B
A206
3
A206
1
2
A305A
2
A305A
1
A305A
1
A305A
B
H
CBA
2
A307A
A307A
5
1
A305B
1
A305B
2
A305B
1
A304C
2
A304C
A B A A B A A B A A B A A B A A B A
A A A A A A A A A A A A A A
A
A
A
A
30'-9 7/8"20'-0"44'-6 7/8"
3'-4 59/128"4'-0"5'-11 107/256"4'-0"5'-11 107/256"4'-0"4'-0"6'-10 1/2"4'-0"6'-10 1/2"4'-0"6'-10 1/2"4'-0"4'-3"3'-6"4'-6"3'-6"3'-8 1/2"95'-2 3/8"MATCHLINEMATCHLINE2
A303C
-
---
-
---
UNIT
A214
UNIT
A216
UNIT
A218
UNIT
A220
UNIT
A222
UNIT
A224
DATA CENTER
206
MAID
207
FITNESS
203
CORRIDOR
208
SALON
222
MEN
218
WOMENS
217 SHWER
216
SHWER
219
NURSE
215
FILES
214
MEDS
213 DR
211
SENSORY
221
SALES
222
G.M.
224
BUSINESS
223
GYM EQUIP.
202
DISCOVERY
220
LOUNGE
212
212
CORRIDOR
225
CORRIDOR
201
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA B
1/7/2020 3:41:27 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 2 FLOOR PLAN
A102B
ANNEXATION SUBMITTALKEYNOTE INSTRUCTIONAL
1/8" = 1'-0"A102B
LEVEL 2B - FLOOR PLAN 1
RANGEDWW/D W.C.RANGEDWW/DW.C.RANGEDWW/DW.C.RANGEDWW/DW.C.RANGEDWW/DW.C.SHELVES15" R&SW/DW.C.15" R&S
15" R&SW.C.RANGEDWSHELVES15" R&SW/DW.C.15" R&S15" R&SW.C.RANGEDWSHELVES15" R&SW/DW.C.15" R&S15" R&SW.C.RANGEDWRANGEDWW/D W.C.RANGEDWW/D W.C.RANGEDWW/D W.C.RANGEDWW/DW.C.SHELVES15" R&SDWSHELVES15" R&S
W/D KOHLERW.C.15" R&S15" R&S
RANGEDWSHELVES15" R&SW/D
KOHLERW.C.15" R&S15" R&SRANGEDWSHELVES15" R&S
W/D KOHLERW.C.15" R&S15" R&S
RANGEDWSHELVES15" R&SW/D
KOHLERW.C.15" R&S15" R&SRANGEDWDNUP
4
4
A A
F
J J
1
A304B
1
A304B
A2062
2
A304B
2
A304B
A204
3
A2042
A204
1
A205
3
A2052
A205
1
2
A303A
2
A303A
1
A303A
1
A303A
2
A304A
2
A304A
1
A304A
1
A304A
CB
1
A307A2
A307A
A308A
5
A309A
6
-
---
5
6
7
7
8
8
D63'-0"4'-0"23'-6 1/2"3'-7"3'-10 1/2"18'-10 1/2"5'-1 1/2"4'-0"1
A303B
112'-10 1/4"
101'-10"10'-2 3/4"
9'-4 3/4"30'-0 5/8"9'-2 1/8"8'-8 5/8"15'-3 3/8"6'-0 3/4"23'-11 1/4"
4'-10 3/4"4'-6"7'-10"2'-6"9'-4"2'-6"7'-10 5/8"4'-5 3/8"4'-8 3/4"4'-3 1/4"4'-5 3/8"7'-10 5/8"2'-6"4'-10 3/4"3'-0 3/4"3'-0"5'-11"2'-6"6'-4"2'-6"2'-6"4'-2 1/4"
123'-9 1/4"
10'-11"9'-4 3/4"30'-0"8'-9 1/4"23'-11 1/4"14'-0 1/2"14'-0"12'-8 1/2"
10'-11"4'-10 3/4"4'-6"7'-10"2'-6"9'-4"2'-6"7'-10"4'-6"4'-3 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"3'-0"5'-9 1/2"2'-6"8'-3"3'-0"5'-6"6'-1"6'-7 1/2"63'-0"4'-0"31'-0"19'-4"8'-8"27'-6"3'-6"1
A303C
1
A304C
2
A304C
A A A A A B A A A
A B
A
A
BA
AAABAAAAA
A A A A A A A A A B A
A
A A A A A B A A A C C
A B4'-4"4'-8"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"4'-0"11'-0"
5 1/2"
9'-2 3/4"7'-4 1/2"2'-6"4'-8"4'-8"2'-6"7'-10"4'-6"4'-6"
2 3/4"
3'-8 3/4"2'-6"2'-6"6'-4"2'-6"5'-11"8'-9 1/2"2'-6"3'-2 1/2"13'-6 1/2"6'-1"
11'-0"9'-8 1/4"29'-6 1/2"9'-2 3/4"23'-5 3/4"14'-6"13'-6 1/2"
112'-5 1/2"
10'-8 3/8"
5 1/2"
4'-5 1/4"2'-6"7'-10"4'-6"4'-2 1/4"5'-1 3/4"2'-6"7'-8"4'-6"4'-3 1/4"4'-4 1/4"2'-6"2'-6"6'-4"2'-6"5'-9"14'-0 1/2"14'-0"6'-1"6'-4 3/4"
25'-11 1/8"24'-0"8'-9 1/4"23'-11 1/4"14'-0 1/2"14'-0"12'-5 3/4"10'-3 1/4"
4'-11 5/16"
-
---4'-1 1/16"2'-6"8'-0 3/4"2'-6"2'-6"2'-6"2'-6"8'-0 3/4"2'-6"4'-1 1/2"39'-4 1/16"2
A303C
-
---
-
---
-
---
-
---
STAIRS
226
STRG
227
STRG
228
UNIT
N209
UNIT
N211
UNIT
N213
UNIT
N215
UNIT
N216
UNIT
N214
UNIT
N212
UNIT
N210
UNIT
N201
UNIT
N203
UNIT
N205
UNIT
N207
UNIT
N208
UNIT
N202
UNIT
N204
UNIT
N206
CORRIDOR
243
CORRIDOR
209
MAID
210
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LIGHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA C
1/7/2020 3:41:34 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 2 FLOOR PLAN
A102C
ANNEXATION SUBMITTAL1/8" = 1'-0"A102C
LEVEL 2C - FLOOR PLAN 1
RANGEDWW/D W.C.RANGEDWW/DW.C.RANGEDWW/DW.C.RANGEDWW/DW.C.RANGEDWW/DW.C.SHELVES15" R&SW/DW.C.15" R&S
15" R&SW.C.RANGEDWSHELVES15" R&SW/DW.C.15" R&S15" R&SW.C.RANGEDWSHELVES15" R&SW/DW.C.15" R&S15" R&SW.C.RANGEDWRANGEDWW/D W.C.RANGEDWW/D W.C.RANGEDWW/D W.C.RANGEDWW/DW.C.
SHELVES15" R&S
W/D KOHLERW.C.15" R&S15" R&S
RANGEDWSHELVES15" R&SW/D
KOHLERW.C.15" R&S15" R&SRANGEDWSHELVES15" R&S
W/D KOHLERW.C.15" R&S15" R&S
RANGEDWSHELVES15" R&SW/D
KOHLERW.C.15" R&S15" R&SRANGEDWDN
A2013
4
4
A A
D2103
F F
J J
1
A304B
1
A304B
2
-D2141D2171
2A2062
2
A304B
2
A304B
A204
3
A2042
A204
1
A205
3
A2052
A205
1
2
A303A
1
A303A
2
A304A1
A304A
B B
1
A307A2
A307A
4'-6"A308A
6
A309A
5
A307A
6
-
---
5
5
6
6
7
7
8
8
D D
1
A303B
2
A305B
1
A303C
1
A304C
2
A304C 23'-6 1/2"26'-9 1/2"4'-8"4'-0"63'-0"31'-3"31'-9"102'-7 1/2"10'-2 3/4"
4'-10 3/4"4'-6"7'-10"2'-6"9'-4"2'-6"7'-10"8'-9 1/4"4'-8 3/4"4'-6"7'-10"2'-6"4'-10 3/4"3'-0 3/4"3'-0"5'-11"2'-6"6'-4"2'-6"2'-6"4'-2 1/4"10'-2 3/4"4'-0"4'-0"4'-0"4'-0"4'-0"112'-5 1/2"
10'-8 3/8"4'-10 3/4"2'-6"7'-10"4'-6"9'-2"2'-6"7'-10"4'-6"4'-3 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"3'-0"5'-9 1/2"2'-6"2'-9"14'-0"6'-1"6'-4 3/4"
10'-8 3/8"15'-2 3/4"8'-9 1/4"15'-2 3/4"8'-9 1/4"23'-11 1/4"14'-0 1/2"14'-0"
4'-8 3/4"4'-6"7'-10"2'-6"9'-4"2'-6"7'-10"4'-6"4'-3 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"3'-0"5'-9 1/2"2'-6"2'-9"14'-0"4'-10"2'-6"5'-1 3/4"
112'-5 1/2"
12'-5 3/4"
112'-10 1/4"
4'-10 3/4"4'-6"7'-10"2'-6"9'-4"2'-6"7'-10"4'-6"4'-3 1/4"4'-2 1/4"2'-6"2'-6"6'-4"2'-6"5'-11"3'-0"5'-9 1/2"2'-6"2'-9"5'-6"3'-0"5'-6"6'-1"6'-7 1/2"
-
---
2
A303C
11'-0"
0"
9'-2 3/4"30'-0"8'-9 1/4"23'-11 1/4"14'-0 1/2"14'-0"12'-5 3/4"
9'-4 3/4"30'-0"8'-9 1/4"9'-2 3/4"15'-2 3/4"6'-0 3/4"23'-11 1/4"10'-2 3/4"63'-0"4'-0"50'-4"8'-8"9'-0"9'-4 3/4"30'-0"8'-9 1/4"23'-11 1/4"14'-0 1/2"14'-0"12'-8 1/2"
-
---
-
---
-
---
-
---
UNIT
N316
UNIT
N301
UNIT
N303
UNIT
N305
UNIT
N307
UNIT
N302
UNIT
N304
UNIT
N306
UNIT
N308
UNIT
N309
UNIT
N311
UNIT
N313
UNIT
N315
UNIT
N314
UNIT
N312
UNIT
N310
1. ALL DIMENSIONS ARE TO INTERIOR FACE-OF-STUD (F.O.S.) UNLESS NOTED OTHERWISE.
2. CEILING HEIGHTS MEASURED FROM PLYWOOD OR CONCRETE - SEE SECTIONS
3. REFER TO ENLARGED PLANS FOR ALL UNIT DIMENSIONS, WINDOW TYPES, DOORS AND WALLS.
4. REFER TO ENLARGED PLANS FOR ALL DECKS/PATIOS.
5. COORDINATE WITH ALL ENLARGED PLANS FOR ADDITIONAL INFORMATION AND DETAILS.
6. ALL TOPPING SLABS MUST BE POURED AFTER ROOF IS COMPLETE AND BUILDING IS DRIED IN.
7. SEE SHEET A002 FOR PROJECT GENERAL NOTES AND SHEET A003 FOR PROJECT KEYNOTES. REVIEW ALL NOTES PRIOR
TO CONSTRUCTION.
8. COORDINATE WITH STRUCTURAL FRAMING PLANS AND SHEAR WALL PLANS FOR LOCATIONS OF COLUMNS, BEAMS,
SHEAR WALLS, ETC.
9. COORDINATE WITH BUILDER/OWNER FOR ALL INTERIOR FINISHES
10. COORDINATE WITH ELECTRICAL DRAWINGS FOR ALL LI GHTING, POWER AND DATA REQUIREMENTS.
11. ALL EXTERIOR WALLS ARE ASSUMED TO BE 2X6 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
12. ALL INTERIOR WALLS ARE ASSUMED TO BE 2X4 STUD WALLS UNLESS SHOWN/NOTED OTHERWISE.
13. ALL ROOF TRUSSES TO HAVE RAISED ENERGY HEEL CONSTRUCTION TO ALLOW FOR FULL DEPTH INSULATION OVER
EXTERIOR WALLS (COORDINATE INSULATION REQUIREMENTS WITH RESCHECKS).
FLOOR PLAN GENERAL NOTES
FLOOR PLAN KEYNOTES
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:
BUILDING KEY LEGEND
AREA C
1/7/2020 3:41:41 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
LEVEL 3 FLOOR PLAN
A102D
ANNEXATION SUBMITTAL1/8" = 1'-0"A102D
LEVEL 3 - FLOOR PLAN 1
KEYNOTE INSTRUCTIONAL
Key Value Keynote Text
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEER
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
3 4
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
T.O. CHIMNEY
137'-7 5/128"
1 2 56 78
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
IA
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
F J
T.O. CHIMNEY
137'-7 5/128"
T.O. CHIMNEY
137'-7 5/128"
C EB HDG
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
I A
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
FJ
1
A304B
T.O. CHIMNEY
137'-7 5/128"
T.O. CHIMNEY
137'-7 5/128"
CE BHDG
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
34
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
T.O. CHIMNEY
137'-7 5/128"
125678
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:42:07 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
OVERALL EXTERIOR
ELEVATIONS
A201
ANNEXATION SUBMITTAL1/16" = 1'-0"A201
EAST ELEVATION 1
1/16" = 1'-0"A201
SOUTH ELEVATION 2
KEYNOTE INSTRUCTIONAL
1/16" = 1'-0"A201
NORTH ELEVATION 3
1/16" = 1'-0"A201
WEST ELEVATION 4
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEERLEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
2
A301A
1
A301A
1
A306A
2
A306A
-
---
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
A
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
1
A301B
CB
2
A301B
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
3
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
2
A301A
1
A301A
1
1
A306A
2
A306A
2-
---
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:42:14 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
AL EXTERIOR ELEVATIONS
A202
ANNEXATION SUBMITTALKEYNOTE INSTRUCTIONAL
1/8" = 1'-0"A202
AL EAST ELEVATION 1
1/8" = 1'-0"A202
AL SOUTH ELEVATION 2
1/8" = 1'-0"A202
AL WEST ELEVATION 3
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEERLEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
1
A302A
2
A302A
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
I
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
FE HG
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
-
---
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
1
A302A
2
A302A
2
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:42:21 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
MC EXTERIOR
ELEVATIONS
A203
ANNEXATION SUBMITTAL1/8" = 1'-0"A203
MC EAST ELEVATION 1
1/8" = 1'-0"A203
MC SOUTH ELEVATION 2
1/8" = 1'-0"A203
MC WEST ELEVATION 3
KEYNOTE INSTRUCTIONAL
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEER
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
2
A303A
1
A303A
1
A307A
-
---
5 7
1
A303C
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
2
A303C
-
---
-
---
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
A
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
C B
D
1
A303B
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
-
---
-
---
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
4
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
2
A303A
1
A303A 1
A307A
2
A307A
-
---
56
7
8
1
A303C
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
2
A303C
-
---21'-9"-
---
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:42:31 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
IL1 EXTERIOR ELEVATIONS
A204
ANNEXATION SUBMITTAL1/8" = 1'-0"A204
IL1 EAST ELEVATION 1
1/8" = 1'-0"A204
IL1 NORTH ELEVATION 2
1/8" = 1'-0"A204
IL1 WEST ELEVATION 3
KEYNOTE INSTRUCTIONAL
NOTE: REFER TO MATERIAL SPECIFICATIONS DOCUMENT FOR DETAILED
INFORMATION REGARDING EACH FINISH MATERIAL
HATCH PATTERN DESCRIPTION
ELEVATION/ SECTION MATERIAL LEGEND
WOOD CEDAR SHAKE ROOFING SYSTEM
ELEVATION/ SECTION KEYNOTES
LAP SEAM COPPER ROOFING SYSTEM
SINGLE PLY ROOFING MEMBRANE SYSTEM
2X10 CEDAR CHANNEL LAP VERTICAL SIDING SYSTEM WITH SQUARE EDGES
EXTERIOR STONE VENEER
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
4
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
2
A304A
1
A304A
1
A307A 56 8
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
-
---
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
I
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
F
J
1
A304B
T.O. CHIMNEY
137'-7 5/128"
2
A304B
G
1
A304C2
A304C
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
-
---
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 2 -T.O. PLY
111'-7 7/8"
LEVEL 1 -T.O. SLAB
100'-0"
LEVEL 1 -T.O. SLAB
100'-0"
UPPER ROOF BEARING
131'-4 7/8"
UPPER ROOF BEARING
131'-4 7/8"
LEVEL 3 -T.O. PLY
122'-3 3/4"
LEVEL 3 -T.O. PLY
122'-3 3/4"LEVEL 3 BEARING
120'-9"
T.O. CHIMNEY
137'-7 5/128"
2
A304A
1
A304A
1
A307A
568
MEMORY CARE ROOF BEARING
110'-1 1/8"
MEMORY CARE ROOF BEARING
110'-1 1/8"
AL WING ROOF BEARING
120'-9"
AL WING ROOF BEARING
120'-9"
COMMON AREA ROOF BEARING
121'-9"
COMMON AREA ROOF BEARING
121'-9"
-
---
PROJECT NO.
SHEET TITLE:Plot Date:Architecture
Interior Design
Landscape Architecture
Land Planning
Construction Management
5151 South 900 East, Suite 200
Salt Lake City, Ut 84117
ph. 801.269.0055
fax 801.269.1425
www.thinkaec.com
The designs shown and described herein
including all technical drawings, graphic
representation & models thereof, are the
copyrighted work of Think Architecture, Inc. and
connot be copied, duplicated, or commercially
exploited in whole or in part without the sole and
express written permission from THINK
Architecture, Inc.
These drawings are available for limited review
and evaluation by clients, consultants,
contractors, government agencies, vendors, and
office personnel only in accordance with this
notice.
SHEET NUMBER:
REVISIONS:
DATE:1/7/2020 3:42:41 PMINGLEWOOD PLACE - SENIOR LIVING3250 E VICTORY RDMERIDIAN IDAHOJan 7, 2020
18077
IL2 EXTERIOR ELEVATIONS
A205
ANNEXATION SUBMITTAL1/8" = 1'-0"A205
IL2 EAST ELEVATION 1
1/8" = 1'-0"A205
IL2 NORTH ELEVATION 2
1/8" = 1'-0"A205
IL2 WEST ELEVATION 3
KEYNOTE INSTRUCTIONAL