02820 Fences and GatesDecember 4, 2015
t am
Location: Meridian
Product; 8'h Montage Il Classic three rail design.
Color: Black
=1
AMERISTAR PERIMETER SECURITY IDSA INC.
wwwarneristaffence.com ( PO Box 581000 1 Tulsa, OK 74158-1000 1 Pi : 918.835.0898 1 Fx: 915.835.0839
5941 1.V- 1
Product Data
Product LEED Letter
Product Drawings
Product Warranty
Transport H Product Data
Product Drawings
Product Warranty
3
8
9
15
16
20
23
f1: r
Please direct additional questions not outlined in this submittal to the
manufacturer's rep below:
Shaun Byers, 1-800-321-8724
AMERISTAR PERIMETER SECURITY USA INC.
www.ameristarfence.com I PO Box 581000 1 Tolsa, OK 74158-1000 1 Ph: 918.$35.0898 1 Fx: 018.835.0899
INDUSTRIAL ORNAMENTAL STEEL FENCE
Built for strength yet a penchant for beauty, Montage ll is an industrial
weight steel fence that delivers on both levels. Superior welding techniques
create a profile that lends itself to landscaping design while €maintaining
a level of perimeter security that is unmatched.
1`JO) p3
�Juyj' FENCE PRODUCTS
AMERISTARFENCE.COM 1 888-333-3422
ASSAABLOY, the global leader in door opening solutions
f State Facilities
> Government Facilities
�- Airports
Water Treatment & Storage
Public Housing Authorities
Parks & Recreation
' Stadiums & Event Centers
v Schools & Universities
I
Hospitals
p
I "sq x 14ga PICKETS I 1.75" x 1.75" x 12ga RAILS f 2.511sq x 12ga & 3"sq x 12ga POSTS
Farh nrrbaf fc nrorrm Li umldorl ai aarh
STYLE OPTIONS
PROFUSION WELDED STEEL
CLASSIC'" MAJESTIC" GENESIS"
INVINCIBLE`"
All Montage fence panels are fabricated using Ameristar's ProFusion welding process. This technique
combines laser and fusion technology to create a virtually invisible structural connection at every picket
to rail intersection. Unlike typical aluminum fence systems that are held together with unsightly screws,
the ProFusion weld used with Montage promotes a "good neighbor" profilewith sleek lines and no exposed
picket to rail fasteners. When compared to aluminum fencing, Montage's welded steel construction is
unmatched in strength and durability.
E -COAT - PROTECTIVE FINISH
Montage galvanized steel framework is subjected to a multi -stage pre-treatment/wash (with zinc phosphate),
followed by a duplex cathodic electrocoat system consisting of an epoxy primer, which significantly increases
��nrFCT�aar' corrosion protection, and an acrylic topcoat, which provides the protection necessary to withstand adverse
-00AT'weathering effects. This process results in years of maintenance -free ownership.
20 YEAR LIMITED WARRANTY
The Montage families of fencing products are manufactured from superior quality materials by skilled
craftsmen with the highest standards of workmanship in the industry. Ameristar is confident in
offering Montage with a 20 year limited warranty.
MADE DOMESTIC MANUFACTURING
IN THF -I �Ameristar is committed to providing products thatare man .. . �___�W_. _...___.
manufactured in the USA. We have made
U
_i significant investments in technology, process improvement, and employee training in an effort to
secure American jobs and combat inferior import products.
#9799 1 RFVISF0 05/2014
AMERISTAR. FENCE PRODUCTS
Montage II" - Heavy Industrial Steel Ornamental Fence System — Fusion Welded and Rackable
CONSTRUCTION SPECIFICATION - SECTION 32 3119
PART1-GENERAL
1.01 WORK INCLUDED
The contractor shall provide all labor, materials and appurtenances necessary for installation ofthe welded ornamental steel fence system
defined herein at Ada County 911 Call Center.
1.02 RELATED WORK
Section -Earthwork
Section - Concrete
1.03 SYSTEM DESCRIPTION
The manufacturer shall supply a total fence system of Montage 1I0 Welded and Rackable (ATF — All Terrain Flexibility) Ornamental
Steel (specify Classic") design. The system shall include all components (i.e., panels, posts, gates and hardware) required.
1.04 QUALITY ASSURANCE
The contractor shall provide laborers and supervisors who are thoroughly familiar with the type of construction involved and materials
and techniques specified.
1.05 REFERENCES
■ ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc -Coated (Galvanized) or Zinc -Iron Alloy Coated (Galvannealed)
by the Hot -Dip Process.
■ ASTM B 117 - Practice for Operating Salt -Spray (Fog) Apparatus.
■ ASTM D523 - Test Method for Specular Gloss.
■ ASTM D714 - Test Method for Evaluating Degree of Blistering in Paint.
■ ASTM D822 - Practice for Conducting Tests on Paint and Related Coatings and Materials using Filtered Open -Flame Carbon -Arc
Light and Water Exposure Apparatus.
■ ,ASTM D1654 - Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
■ ASTM D2244 - Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates.
■ ASTM D2794 - Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).
■ ASTM D3359 - Test Method for Measuring Adhesion by Tape Test.
■ ASTM F2408 — Ornamental Fences Employing Galvanized Steel Tubular Pickets.
1.06 SUBMITTAL
The manufacturer's literature shall be submitted prior to installation.
1.07 PRODUCT HANDLING AND STORAGE
Upon receipt at the job site, all materials shall be checked to ensure that no damage occurred during shipping or handling. Materials shall
be stored in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism and theft.
1A$ PRODUCT WARRANTY
A. All structural fence components (i.e. rails, pickets, and posts) shall be warranted within specified limitations, by the manufacturer
for a period of 20 years fiom date of original purchase. Warranty shall cover any defects in material finish, including cracking,
peeling, chipping, blistering or corroding.
B. Reimbursement for labor necessary to restore or replace components that have been found to be defective under the terms of
manufactures warranty shall be guaranteed for five (5) years fi•om date of original purchase.
PART 2 - MATERIALS
2.01 MANUFACTURER
The fence system shall conform to Montage le Welded and Raekable (ATF — All 'Terrain Flexibility) Ornamental Steel, (s eci
Classic-) design, (specify extended picket) bottom rail treatment, (specify 3 -Rail) style manufactured by Ameristar Fence Products, Inc.,
in Tulsa, Oklahoma.
Montage Il Specification Ameristar Fence Products Rev. €0/10/2012
2.02 MATERIAL
A. Steel material for fence panels and posts shall conform to the requirements of ASTM A653/A653M, with a minimum yield strength of
45,000 psi (310 MPa) and a minimum zinc (hot-dip galvanized) coating weight of 0.90 oz/ft2 (276 g/m2), Coating Designation G-90.
B. Material for pickets shall be I" square x 14 Ga. tubing. The rails shall be steel channel, 1.75" x 1. 75" x.105". Picket holes in the rail
shall be spaced 4.715" o.c. Fence posts and gate posts shall meet the minimum size requirements of Table 1.
2.03 FABRICATION
A. Pickets, rails and posts shall be pre-cut to specified lengths. Rails shall be pre-punched to accept pickets.
B. Pickets shall be inserted into the pre-punched holes in the rails and shall be aligned to standard spacing using a specially calibrated
alignment fixture. The aligned pickets and rails shall be joined at each picket-to-rail intersection by Ameristar's proprietary fusion
welding process, thus completing the rigid panel assembly (Note: The process produces a virtually seamless, spatter-free good-neighbor
appearance, equally attractive from either side of the panel).
C. The manufactured panels and posts shall be subjected to an inline electrodeposition coating (E-Coat) process consisting of a multi-
stage pretreatment/wash (with zinc phosphate), followed by a duplex application of an epoxy primer and an acrylic topcoat. The
minimum cumulative coating thickness of epoxy and acrylic shall be 2 mils (0.058 mm). The color shall be (ecify Black). The coated
panels and posts shall be capable of meeting the performance requirements for each quality characteristic shown in Table 2 (Note: The
requirements in Table 2 meet or exceed the coating performance criteria of ASTM F2408).
D. The manufactured fence system shall be capable of meeting the vertical load, horizontal load, and infill performance requirements for
Industrial weight fences under ASTM F2408.
E. Swing gates shall be fabricated using 1.75" x 14ga Forerunner double channel rail, 2" sq. x l lga. gate ends, and 1" sq. x 14ga. pickets.
Gates that exceed 6' in width will have a 1.75" sq, x l4ga. intermediate upright. All rail and upright intersections shall be joined by
welding. All picket and rail intersections shall also be joined by welding. Gusset plates will be welded at each upright to rail intersection.
Cable kits will be provided for additional trussing for all gates leaves over 6'.
PART 3 -EXECUTION
3.01 PREPARATION
All new installation shall be laid out by the contractor in accordance with the construction plans.
3.02 FENCE INSTALLATION
Fence post shall be spaced according to Table 3, plus or minus %z". For installations that must be raked to follow sloping grades, the post
spacing dimension must be measured along the grade. Fence panels shall be attached to posts with brackets supplied by the manufacturer.
Posts shall be set in concrete footers having a minimum depth of 36" (Note: In some cases, local restrictions of freezing weather
conditions may require a greater depth). The "Earthwork" and "Concrete" sections of this specification shall govern material
requirements for the concrete footer. Posts setting by other methods such as plated posts or grouted core -drilled footers are permissible
only if shown by engineering analysis to be sufficient in strength for the intended application.
3.03 FENCE INSTALLATION MAINTENANCE
When cutting/drilling rails or posts adhere to the following steps to seal the exposed steel surfaces; 1) Remove all metal shavings from
cut area. 2) Apply zinc -rich primer to thoroughly cover cut edge and/or drilled hole; let dry. 3) Apply 2 coats of custom finish paint
matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. Ameristar spray cans or paint pens
shall be used to prime and finish exposed surfaces; it is recommended that paint pens be used to prevent overspray. Use of non-
Ameristar parts or components will negate the manufactures' warranty.
3.04 GATE INSTALLATION
Gate posts shall be spaced according to the manufacturers' gate drawings, dependent on standard out -to -out gate leaf dimensions and gate
hardware selected. Type and quantity of gate hinges shall be based on the application; weight, height, and number of gate cycles. The
manufacturers' gate drawings shall identify the necessary gate hardware required for the application. Gate hardware shall be provided by
the manufacturer of the gate and shall be installed per manufacturer's recommendations.
3.05 CLEANING
The contractor shall clean the jobsite of excess materials; post -hole excavations shall be scattered uniformly away from posts.
Montage 1€ Specification Atttcristar Fence Products Rev. 10110/2012
Table 2 — Coating Performance Requirements
Table I — Minimum Sizes for Montage 11 Posts
ASTM Test Method
Fence Posts
Panel Height
D3359 — Method B
2-112" x 12 Ga.
Up to & Including 6' Height
Post Size
3" x I2 Ga.
Over 6' Up to & Including 8' Height
B117, D714 & D1654
Corrosion Resistance over 1,500 hours (Scribed per D1654;
2-112" 3"
Bracket
Gate Leaf
Gate Height
Up to & Including 4' Over 4' Up to .&. Including 6'
Over 6' Up to & Including S'
Up to 4'
2-112" x 12 Ga. 3" x 12 Ga.
3" x 12 Ga.
4'1" to 6'
3" x 12Ga. 4" x 11 Ga.
4" x 1 I Ga.
6'1" to 8'
3" x 12 Ga. 4" x 11 Ga.
6" x 3/16"
81111 to 10'
4" x I 1 Ga. 6" x 3/16"
6" x 3116"
10' 1" to 12'
4" x I 1 Ga. 6" x 3/16"
6" x 3116„
12'1" to 14'
4" x I 1 Ga. 6" x 3116"
6" x 3116"
14'1" to 16'
6" x 3/16" 6" x 3116"
6" x 3/16"
Table 2 — Coating Performance Requirements
Quality Characteristics
ASTM Test Method
Performance Requirements
Adhesion
D3359 — Method B
Adhesion (Retention of Coating) over 90% of test area (Tape and
8' Nominal (92-5/8" Rai]
Post Size
knife test).
Corrosion Resistance
B117, D714 & D1654
Corrosion Resistance over 1,500 hours (Scribed per D1654;
2-112" 3"
Bracket
failure mode is accumulation of 118" coating loss from scribe or
Industrial
Industrial
medium 98 blisters).
Impact Resistance
D2794
Impact Resistance over 60 inch lb. (Forward impact using 0.625"
Line
Universal
ball).
Weathering Resistance
D822 D2244, D523 (60' Method)
Weathering Resistance over I,000 hours (Failure mode is 60%
2-112" (BB319)
2.5" (BB302)
loss of gloss or color variance of more than 3 delta -E color units).
Montage 11 Specification Ameristar Pence Products Rev. 10/100012
Table 3 — Montage li — Post Spacing By Bracket Type
Span
For INVINCIBLE
For CLASSIC, GENESIS, & MAJESTIC
8' Nominal (91-1/2" Rail)
8' Nominal (92-5/8" Rai]
Post Size
2-112" 1 3"
2-1/2" 3"
2-112" 1 3"
2-1/2" 3"
2-112" 3"
Bracket
Industrial
Industrial
Industrial
Industrial
Industrial
Type
Flat Mount
Line
Universal
Flat Mount
Swivel
(BB301)*
2-112" (BB319)
2.5" (BB302)
(BB301)
(BB304)*
3" (BB320)
3" (BB303)
Post
Settings
94-112"
95"
94-1/2"
95"
96"
96-1/2"
96"
96-1/2"
*96"
*96-112"
±%"O.C.
*Note: When using BB304 swivel brackets on either or both ends of a panel installation, care must be taken to ensure the spacing
between post and adjoining pickets meets applicable codes. This will require trimming one or both ends of the panel. When using
the BB301 flat mount bracket forinvincible style, rail may need to be drilled to accommodate rail to bracket attachment.
Montage 11 Specification Ameristar Pence Products Rev. 10/100012
V14, !X',
r
September 26, 2014
Re; Montage and Aegis Series Fence and Gate Systems
To Whom It May Concern;
This letter is to certify that, for all Montage and Aegis series fence and gate
systems, all base materials are purchased from domestic mills and manufacturing
operations are performed by Ameristar Perimeter Security U.S.A. in Tulsa,
Oklahoma, U.S.A. Therefore, all associated parts fence components (i.e.; posts,
rails and pickets) meet Buy America requirements.
This letter also is to certify that all Montage and Aegis series fence components are
produced from steel containing a minimum 62% recycled post industrial content.
These fence components, therefore, contribute to obtaining LEER points for the
associated building structures/projects.
9pspectfuJty,
Mike Elmore
Product Manager- Fence and Gates
Ameristar Perimeter Security U.S.A.
AMERISTAR PERIMETER SECURITY IDSA INC.
www.ameristarfence.com I PO Box 581000 1 Tulsa, OK 74158-1000 1 Ph: 918.835.0898 1 Fx: 918.835.0809
\\ ��
)!
` !
a
/ §
_
_
\
�
q
�\.
b!)
;|)
�v!
I ;
\/d
4/d
�
�
O
�
«rP
m
_
(
CO
R
K
%
®/
\
\w
«
Go
<=
§
\\\>\)
e
)
�
G
£)§\
2
§
<
,
}7\
L
§
§
s
�
§
�
)
W
m
2
§
&
\
2
)
§
§
}
e
o
0
0
w
3
#�
3
QMR
\
\
a
$dam
E
}m§
A
e
\
viols
fn
//
A\@:
�
c
a
\ �
a
m �
--
�
/
4m
Q
m(/
�
�
�
a
9
e a
�[
bq
'A
x
z
m I !
.�..,
�.
B
m
/
O�
\
WP
b\
</D
//
/)
�
MONTAGE II® 1 WARRANTY
WELDED ORNAMENTAL FENCE
Arneristar's Montage 111welded ornamental fences are manufactured from the highest quality materials by skilled craftsmen to meet
the highest standards of workmanship in the industry. Galvanized steel framework is subjected to a multi -stage pretreatment/wash
(with zinc phosphate), followed by a duplex cathodic electro -coat system consisting of an epoxy primer, which significantly increases
corrosion protection, and an acrylic liquid topcoat, which provides the protection necessary to withstand adverse weathering effects.
The electro -coated surface on all Montage 11 welded ornamental panels and posts are guaranteed under normal and intended usage,
against cracking, peeling, chipping, blistering or corroding commencing with the original purchase date and extending according to the
applications defined in the table below. Normal and intended usage does not include physical damage, abrasion, or heavy salt spray
exposure to the protective coating.
The following acts and/or omissions will void the subject warranty:
• Damage to the product caused by the property owner by use of landscape, gardening equipment, chemicals that may cause damage,
and/or water sprinklers with high mineral content;
• Damage caused by adhesion ofchicken wire, chain link mesh, welded wire, or other similar substance to the product;
• Damage caused by allowing plantlife ofany sortto grow directly upon or in contactwith any portion ofthe product or sap from trees;
• Any alteration to the product itself by the property owner including any on-site cutting or welding; and/or, failure to follow any
and all maintenance instructions provided by Ameristarr at the time of sale to the original purchaser even if these instructions are
not forwarded to the ultimate claimant tinder this warranty.
• When cutting Montage II immediately seal the exposed surfaces by 1) Removing all metal shavings from the cut area 2)
Applying zinc -rich primer to thoroughly cover cut edge and drilled hole and, after letting dry, 3) Applying two (2) coats of custom
finish spray paint matching fence color. Failure to seat exposed surfaces per steps 1-3 above will negate warranty.
• If contractor uses non-Ameristar parts/components, this will negate the warranty,
Ameristar Montage 11 welded ornamental fences are. also guaranteed for the same period of time against defects in workmanship or
materials, Should any Montage If welded ornamental panel or post manufactured by Ameristar fail in accordance with any of the above
cond itions, Ameristar warrants to the original purchaser their redemption through replacement, renewal or issuance of a pro -rated credit.
The choice ofredemption method is solely at the discretion ofAmeristar. If the pro -rated alternative is chosen, the amount will be based
on the original cost of materials at the date of purchase multiplied by the appropriate time and exposure factor from the table below:
Application Length of Warranty
Fence Installations 0 to l Mile from Salt Water Coast Line S Years
Fence Installations l Mile to 10 Miles from Salt Water Coast Line 10 Years
Fence Installations Over 10 Miles from Saltwater Coast Liuc 20 Years
h[qlL Regardless of location and years in service, evidence of historical salt spray exposure shall be
considered as grounds to void any warranty obligations.
Notice of failure under the conditions of this warranty shall be sent to Arneristar or its authorized representative, in v.,riting, together
with proof of purchase and shall specify the nature of the defect and when it was first observed as well as photographs of current site
conditions. Should the fence be improperly installed, Ameristar shall not be responsible for guaranteed performance or appearance
of the material. Neither does this guarantee apply when failure or damage is due to improper use or application, abuse or misuse, salt
spray exposure (see Table and Note above), vandalism, or acts of God. Ameristar reserves the right to inspect the material to determine
validity of the claim.
Upon acceptance of the claim by Ameristar or its authorized representative, redemption by replacement, renewal or issuance of a
pro -rated credit shall be made by Ameristar. Reimbursement for labor necessary to restore and/or replace components that have been
found dekective under the temis of ibis warranty is guaranteed to the original purchaser for a period of five (S) years from the original
purchase date. Ameristar reserves the right to select the qualified company or individual to perform the labor to repair or replace the
components that are deemed to be defective under the terms of this warranty,
The above constitutes the complete warranty by the manufacturer. No other agreement, written or implied, is valid. Ameristar Fence
Products does not authorize any other person or agent to make any other express warranties. Ameristar neither assumes nor authorizes
any other person or agent to assume any other liability in connection with the Montage II welded ornamental fence system.
�IPaIIII AMERIS AR' 1555 N. MINGO RD., UL,SA, OK 74116
�111� FENCE PRODUC S WWW.AMERISTARFENCE.COM
A L UNINUM CANTILEVER GATES
TransPort is a revolutionary cantilever gate system made up of three
components; frame, fa�adeandhardware. Because of its unique design,
Tra n sPort gates can be easily installed without the use of equipment or
excess labor.
FENCE PRODUCTS
ANfRISTARFENCE.COM 1 888-333-3422
ASSAABLOY,the global leader in door opening solutions
n .01
Water Treatment& Storage
Municipal Facilities
Government Facilities
Airports
Manufacturing Plants
Petro & Chemical Facilities
Power Plants & Substations
t, Schools & Universities
Stadiums & Event Centers
n .01
2"sq x,25" wall UPRIGHTS & DIAGONAL BRACES 5" x 2" FAST -TRAIL (top & bottom)
TRANSPORT 11®
I" Ornamental Picket Design I ,-Invincible shown
Matches. Montage// I Echelon II I Aegis//
TRANSPORT ESTATE
15" Ornamental Arched Picket Design I * Majestic shown
Matches: Aluminum Estate Entry Gates
GATE DESIGN
The component design of Ameristar's TransPort Cantilever gate
decreases the risk of damage during transit. The new TransPort
design does not require a team of installers or machinery to install
the gate frame, the cantilever gate can easily be installed with a
standard three man crew in about two hours.
HARDWARE
Unlike other engineered cantilever gates, Transport gates come
equipped with 4 internal trollies that distribute the weight of the
gate as it is opened and closed.
#9799 1 REVISED 05/2014
AMERISTAR FENCE PRODUCTS
TRANSPORT II — Enclosed Track Industrial Aluminum Cantilever Gate System
Construction Specification -- SECTION 32 3100
PART I - GENERAL
1.01 WORK INCLUDED
The contractor shall provide all labor, materials, and appurtenances necessary for installation of the industrial cantilever gate
system defined herein at Ada County 911 Call Center.
1.02 RELATED WORK
Section - Earthwork
Section - Concrete
1.03 SYSTEM DESCRIPTION
The manufacturer shall supply a total industrial ornamental aluminum cantilever gate system of the Ameristar® TransPort II
design, (specify Classic) style. The system shall include all components (i.e,, tracks, uprights, bracing, pickets, hardware,
fittings and fasteners) required.
1.04 QUALITY ASSURANCE
The contractor shall provide laborers and supervisors who are thoroughly familiar with the type of construction involved and
materials and techniques specified.
1.05 REFERENCES
is ASTM B117 - Practice for Operating Salt -Spray (Fog) Apparatus.
■ ASTM B221 -Aluminum and Aluminum -Alloy Extruded Bars, Rods, Wire, Profiles and Tubes.
ASTM D523 - Test Method for Specular Gloss.
■ ASTM D822 -Practice for Conducting Tests on Paint and Related Coatings and Materials using Filtered Open -Flame
Carbon -Arc Light and Water Exposure Apparatus,
■ ASTM D 165 4 - Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
■ ASTM D2244 - Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates.
■ ASTM D2794 - Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).
■ ASTM D3359 - Test Method for Measuring Adhesion by Tape Test.
■ ASTM F1184 — Industrial & Commercial Horizontal Slide Gates
1.06 SUBMITTAL
The manufacturer's submittal package consisting of gate elevations, hardware details, and installation details, shall be
submitted prior to installation.
1.07 PRODUCT HANDLING AND STORAGE
Upon receipt at the job site, all materials shall be checked to ensure that no damage occurred during shipping or handling.
Materials shall be stored in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather,
vandalism, and theft.
PARI' 2 - MATERIALS
2.01 MANUFACTURER
All industrial ornamental aluminum cantilever gates shall conform to the Ameristar® TransPort II gate system, (spec
Classic) style, manufactured by Ameristar Fence Products, Inc., in Tulsa, Oklahoma. The project gate schedule shall include
the following additional information for each cantilever gate included in the project scope. (specify nominal opening size
range in feet) opening, and (specify size and shape of posts) gate posts.
2.02 MATERIAL
A. The materials used for cantilever gate framing (i.e., uprights, diagonal braces and pickets or pales) shall be manufactured
from ASTM B221 aluminum (designation 6005-T5) with a yield strength of 35,000 PSI, a tensile strength of 38,000 PSI and
a standard mill finish, The TransPort® Fast-Trak"I" rails shall be manufactured from ASTM B221 aluminum (designation
6005-T5) with minimum yield strength of 35,000 PSI, a tensile strength of 38,000 PSI and a standard mill finish.
B. Material for diagonal bracing and uprights shall be 2" sq. x %n" aluminum. The design of the top and bottom enclosed
track shall conform to the manufacturers 5" x 2" Fast -Trak system. Material for pickets shall be 1" x 1/8" wall aluminum.
C. Internal roller truck assembly shall be self -aligning swivel ball-and-socket type running on four bearing wheels. Internal
roller truck assembly shall be affixed to the hanger bracket by means of a 5/8" diameter industrial -grade rod end/center bolt,
with a minimum static load rating of 10,000 pounds. Attachment of the center bolt to the truck body shall be by means of a
swivel Joint to ensure equivalent and consistent loading on all bearing wheels and internal track surfaces throughout the travel
of the gate.
2.03 FABRICATION
A. Pickets, enclosed track, uprights and diagonal bracing shall be pre -drilled and labeled for easy assembly. All components
shall be precut to specified lengths.
B. Top and bottom rail extrusions shall be mechanically fastened to vertical uprights and reinforced with diagonal braces, as
required by drawing.
C. The manufactured components shall be subjected to the Ameristar thermal stratification coating process (high-
temperature, in-line, multi -stage, and multi -layer) including, as a minimum, a six -stage pretreatment/wash and an electrostatic
spray application of a polyester finish. The topcoat shall be a "no -mar" TGIC polyester powder coat finish with a minimum
thickness of 2 mils (0.0508mm). The color shall be (specify Black). The stratification -coated framework shall be capable of
meeting the performance requirements for each quality characteristic shown in Table 1.
Table
I — Coating Performance Requirements
Quality Characteristics
ASTM Test Method
Performance Requirements
Adhesion
D3359 Method B
Adhesion (Retention of Coating) over
90% of test area (Tape and knife test).
Corrosion Resistance
B 117, D714 & D1654
Corrosion Resistance over 3,500 hours
(Scribed per D 1654; failure mode is
accumulation of 1/8" coating loss from
scribe or medium #8 blisters).
Impact Resistance
D2794
Impact Resistance over 60 inch lb.
(Forward impact using 0.625" ball).
Weathering Resistance
D822 D2244, D523 (60° Method)
Weathering Resistance over 1,000
hours (failure mode is 60% loss of
gloss or color variance of more than 3
delta -E color units).
PART 3 - EX1;CUTION
3.0I PREPARATION
A. All new gate installations shall be laid out by the contractor in accordance with the construction plans.
B. All hardware shall be installed in accordance with the Transport installation instructions. Transport cantilever gates shall
be installed so they comply with current ASTM F2200 & UL325 standards.
C. Gate stops shall be installed on each track in a way that conforms to current ASTM F2200 standards.
3.02 GATE INSTALLATION
Gate post shall be spaced according to specified gate elevation. Posts shall be set in concrete footers having a minimum
depth of 48" with a minimum diameter of 12" (Note: In some cases, local restrictions of freezing weather conditions may
require a greater depth). The "Earthwork" and "Concrete" sections of this specification shall govern material requirements for
the concrete footer. Posts setting by other methods such as plated posts or grouted core -drilled footers are permissible only if
shown by engineering analysis to be sufficient in strength for the intended application.
3.03 CLEANING
The contractor shall clean the jobsite of excess materials; post -hole excavations shall be scattered uniformly away from posts.
\§\�,
_
&E�
\
lif
\
z
q
PH��_
O DEw§!§
Li
&
�
Q
�
G!
q!|
O
------
Q
o
z
U
°
d
�
�
m
q
Q
-
/
Q
co
m
��
3
._
)
�
�
�
Q
/
�
G
/
q
q
/
AMERISTARn: TRANSPORTfm ALUMINUM CANTILEVER GATE
LIMITED WARRANTY
TransPortT"' Aluminum Cantilever Gate Systems by AMERISTARO are manufactured from the highest quality materials by
skilled craftsmen to meet the highest standards of workmanship in the industry.
Ameristar Fence Products hereby certifies that its cantilever gates are free from defects in material or workmanship and all
aluminum cantilever gate components and hardware are guaranteed against such defects for a one (1) year period from the
original date of purchase. (Note. Accidental damages, defects resulting from improper installation techniques, and damage
from abuse or vandalism are not included herein).
Additionally, on TransPortT"' Ornamental Cantilever Gates, aluminum gate components (i.e. top track, bottom rail and
pickets) shall be subject to a six stage pretreatment/wash followed by an electrostatic spray application of a "no -mar" TGIC
polyester powder coat finish, which provides the protection necessary to withstand adverse environmental conditions. The
powder coated surface on all such components is guaranteed to the original owner under normal and proper usage, against
cracking, peeling, chipping, blistering or corroding for the lifetime of the gate system. Normal and proper usage does not
include physical damage or abrasion to the protective coating.
Should any TransPortT°' gate component manufactured by Ameristar Fence Products fail in accordance with any of the above
conditions, Ameristar Fence Products warrants to the original purchaser their redemption through replacement or renewal.
The decision as to which method of redemption is allowed is solely at the discretion of Ameristar. Notice of failure under the
conditions of this warranty shall be sent to Ameristar Fence Products or its authorized representative, in writing, together
with proof of purchase and shall specify the nature of the defect and when it was first observed. Should the gate components
be improperly assembled or installed, Ameristar Fence Products shall not be responsible for guaranteed performance or
appearance of the material. Neither does this guarantee apply when failure or damage is due to improper use or application,
abuse or misuse, vandalism or acts of God. Ameristar Fence Products reserves the right to inspect the material to determine
validity of the claim.
Upon validation of the claim by Ameristar Fence Products or its authorized representative, redemption by replacement or
renewal shall be made by Ameristar Fence Products. Reimbursement for the costs of removal and installation of materials are
not included in the guarantee, nor will Ameristar Fence Products provide those services.
The above constitutes the complete warranty by the manufacturer. No other agreement, written or implied, is valid.
Ameristar Fence Products does not authorize any other person or agent to make any other express warranties. Ameristar
Fence Products neither assumes nor authorizes any other person or agent to assume any other liability in connection with
TransPortT"' Aluminum Cantilever Gate Systems. Sone jurisdictions do not allow limitations on how long an implied
warranty lasts, nor do they allow an exclusion or limitation of incidental or consequential damages; therefore, the limitations
and exclusions noted herein may not apply.
PURCHASE DATE
DEALER SIGNATURE
1['►►� .MERITS'
P. 0. BOX 581000 "TULSA, OKLAHOMA 74158-1000
WELDED ORNAMENTAL FENCE
Ameristar's Montage Commercial'a welded ornamental fences are manufactured from the highest duality materials by skilled craftsmen to
meet the highest standards of workmanship in the industry, Galvanized steel framework is subjected to a multi -stage pretreatment/wash
(with zinc phosphate), followed by a duplex cathodic electro -coat system consisting of an epoxy primer, which significantly increases
corrosion protection, and an acrylic liquid topcoat, which provides the protection necessary to withstand adverse weathering effects.
The electro -coated surface on all Montage Commercial welded ornamental panels and posts are guaranteed under normal and intended
usage, against cracking, peeling, chipping, blistering or corroding commencing with the original purchase date and extending according
to the applications defined in the table below. Normal and intended usage does not include physical damage, abrasion, or heavy salt
spray exposure to the protective coating.
The following acts and/or omissions will void the subject warranty:
• Damage to the product caused by the property owner by use of landscape, gardening equipment, chemicals that may cause damage,
and/or water sprinklers with high mineral content;
• Damage caused by adhesion of chicken wire, chain link mesh, welded wire, or other similar substance to the product;
• Damage caused by allowing plant life of any sort to grow directly upon or in contact with any portion of the product or sap from trees;
• Any alteration to the product itself by the property owner including any on-site cutting or welding; and/or, failure to follow any
and all maintenance instructions provided by Ameristar' at the time of sale to the original purchaser even if these instructions are
not forwarded to the ultimate claimant under this warranty.
• When cutting Montage Commercial immediately seal the exposed surfaces by 1) Removing all metal shavings from the cut area 2)
Applying zinc -rich primer to thoroughly cover out edge and drilled hole and, after letting dry, 3) Applying two (2) coats of custom
finish spray paint matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty.
• If contractor uses non-Ameristar parts/components, this will negate the warranty.
Ameristar Montage Commercial welded ornamental fences are also guaranteed for the same period of time against defects in workman-
ship or materials. Should any Montage Conunercial welded ornamental panel or post manufactured byAmeristar fail in accordance with
any of the above conditions, Ameristar warrants to the original purchaser their redemption through replacement, renewal or issuance of
a pro -rated credit. The choice of redemption method is solely at the discretion of Ameristar. If the pro -rated alternative is chosen, the
amount will be based on the original cost of materials at the date of purchase multiplied by the appropriate time and exposure factor
from the table below:
Application Length of Warranty
Fence Installations 0 to I Mile from Salt Water Coast Line 5 Years
Fence Installations I Mile to 10 Miles from Salt Water Coast Line 10 Years
Fence Installations Over 10 Miles from Salt Water Coast Line 20 Years
ote: Regardless of location and years in service, evidence of historical salt spray exposure shall be
considered as grounds to void any warranty obligations.
Notice of failure under the conditions of this warranty shall be sent to Ameristar or its authorized representative, in writing, together
with proof of purchase and shall specify the nature of the defect and when it was first observed as well as photographs of current site
conditions. Should the fence be improperly installed, Ameristar shall not be responsible for guaranteed performance or appearance
of the material. Neither does this guarantee apply when failure or damage is due to improper use or application, abuse or misuse, salt
spray exposure (see Table and Note above), vandalism, or acts of God. Ameristar reserves the right to inspect the material to determine
validity of the claim.
Upon acceptance of the claim by Ameristar or its authorized representative, redemption by replacement, renewal or issuance of a
pro -rated credit shall be made by Ameristar. Reimbursement for labor necessary to restore and/or replace components that have been
found defective under the terms of this warranty is guaranteed to the original purchaser for a period of five (5) years from the original
purchase date. Ameristar reserves the right to select the qualified company or individual to perform the labor to repair or replace the
components that are deemed to be defective under the terms of this warranty.
The above Constitutes the complete warranty by the manufacturer. No other agreement, written or implied, is valid. Ameristar Fence
Products does not authorize any other person or agent to make any other express warranties. Ameristar neither assumes nor authorizes
any other person or agent to assume any other liability in connection with the Montage Commercial welded ornamental fence system.
i
��II-1111 AMERISTAR® 1555 N. MINGO RD., TULSA, OK 74116
YA11- FENCE PRODUCTS WWW.AAHRisTARrENCE.COM
3.04 GATE INSTALLATION
Gate posts shall be spaced according to the manufacturers' gate drawings, dependent on standard out -to -out gate leaf dimensions and gate
hardware selected. Type and quantity of gate hinges shall be based on the application; weight, height, and number of gate cycles, The
manufacturers' gate drawings shall identify the necessary gate hardware required for the application. Gate hardware shall be provided by
the manufacture of the gate and shall be installed per manufacturer's recommendations.
3.05 CLEANING
The contractor shall clean the jobsite of excess materials; post -hole excavations shall be scattered unitm-mly away fiom posts.
Table 2 --- Coating Performance Requirements
Table l ---- Minimum Sizes for Montage Commercial Posts
Fence Posts
Panel Heig t
2-1/2" x 14 Ga.
7' & 8' Heights
Adhesion (Retention of Coating) over 90% of test area (Tape and
Post Size
Gate Leaf
Gate Height
7' & 8' Heights
Up to 4'
3" x 12 Ga.
41"to6'
4"x12Ga.
61" to 16'
6" x 12 Ga.
Table 2 --- Coating Performance Requirements
Quality Characteristics
ASTM `fest Method
Perfonnance Requirements
Adhesion
D3359 —Method B
Adhesion (Retention of Coating) over 90% of test area (Tape and
Post Size
2-1/2" 3"
knife test).
Corrosion Resistance
B 117, D714 & D1654
Corrosion Resistance over 1,500 hours (Scribed per DI 654;
2-1/2" 3"
Bracket
failure mode is accumulation of 1/8" coating loss from scribe or
Montage
Montage
medium #8 blisters).
Impact Resistance
D2794
Impact Resistance over 60 inch lb. (Forward impact using 0.625"
Commercial
Commercial
ball}.
Weathering Resistance
D822 D2244, D523 (60" Method)
Weathering Resistance over 1,000 hours (Failure mode is 60%
Invincible Flat
loss of gloss or color variance of more than 3 delta -E color units).
Table 3 -- Montage Commercial--- Post Spa inBy Bracket Type
Span
For INVINCIBLE
For CLASSIC, GENESIS, & MAJESTIC
8' Nominal (90.445" Rail)
8' Nominal (91.95" Rail)
Post Size
2-1/2" 3"
24/2" 3"
2-1/2"
3"
2-1/2" 3"
2-1/2" 3"
Bracket
Montage
Montage
Montage
Montage
Montage
Montage
Type
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Invincible Flat
Invincible Line
Universal
Line Blvd.
Flat Mount
Swivel
Mount
2112" (BB 119)
(BB 112)
(BB 114)
(BB 111)
(BB 113)*
(BB 1 I 8)
3" (IIB 120)
Post
Settings
94"
94112"
94"
94-1/2"
95"
95"
95"
95-112"
*95"
*95-1/2"
t 1/4"
O.C.
*Note: When using BB304 swivel brackets on either or both ends of a panel installation, care must be taken to ensure the spacing
between post and adjoining pickets meets applicable codes. This will require trimming one or both ends of the panel.
Montage Cornmercial Specification Atueristar Fence Products Rev. 05/02/2014
PART 2 - MATERIALS
2.01 MANUFACTURER
The fence system shall conform to (specify Montage Commercial standard picket space or Montage Commercial Pool Pet & Play 3"
air space) Welded and Rnekable (ATF --- All Terrain Flexibility) Ornamental Steel, (for standard picket space, specify Classic, Majestic,
Genesis or Invincible for 3" airs ace specify Classic Majestic, or Genesis} design (specify extended picket or flush) bottom rail
treatment, (specify 3 -Rail 4 -Rail or 3 -Rail with Double Rings, 4 -Rail with Double Rings style manufactured by Ameristar Fence
Products, Inc., in Tulsa, Oklahoma.
2.02 MATERIAL,
A. Steel material for fence panels and posts shall conform to the requirements of ASTM A653/A653M, with a minimum yield strength
of 45,000 psi (310 MPa) and a minimum zinc (hot -dip galvanized) coating weight of 0.60 oz/ft' (184 g/m), Coating Designation G-
60.
B. Material for pickets shall be 314" square x 14 Ga. tubing. The rails shall be steel channel, 1.5" x 1.4375" x 14 Ga. Picket holes in
the rail shall be spaced (specify 4.675" o.c. for standard picket space or 3.500" o.c. for 3" airs ace). Fence posts and gate posts shall
meet the minimum size requirements of Table 1,
2.03 FABRICATION
A. Pickets, rails and posts sball be pre-cut to specified lengths. Rails shall be pre -punched to accept pickets.
B. Pickets shall be inserted into the pre -punched holes in the rails and shall be aligned to standard spacing using a specially calibrated
alignment fixture. The aligned pickets and rails shall be joined at each picket -to -rail intersection by Ameristar's proprietary fusion
welding process, thus completing the rigid panel assembly (Note: The process produces a virtually seamless, spatter -free good -
neighbor appearance, equally attractive from either side of the panel).
C. The manufactured panels and posts shall be subjected to an inline electrode position coating (E -Coat) process consisting of a multi-
stage pretreatment/wash (with zinc phosphate), followed by a duplex application of an epoxy primer and an acrylic topcoat. The
minimum cumulative coating thickness of epoxy and acrylic shall be 2 mils (0.058 mm). The color shall be (specify Black or
Bronze). The coated panels and posts shall be capable of meeting the performance requirements for each quality characteristic shown
in Table 2 (Note: The requirements in Table 2 meet or exceed the coating performance criteria of ASTM F2408).
D. The manufactured fence system shall be capable of meeting the vertical load, horizontal load, and infill performance requirements for
Commercial weight fences under ASTM F2408.
E. Gates with an out to out leaf dimension less than and including 72 inches shall be fabricated using Montage Commercial
ornamental panel material and 1-3/4" sq. x 14ga. gate ends. Gate leafs greater than 72 inches shall be fabricated using ForeRunner
rails, 17 gauge pickets, intermediate uprights, gussets and 1-3/4" sq. x 14ga. gate ends. All rail and upright intersections shall be
joined by welding. All picket and rail intersections shall also be joined by welding.
PART 3 - EXECUTION
3.01 PREPARATION
All new installation shall be laid out by the contractor in accordance with the construction plans.
3.02 INSTALLATION
Fence post shall be spaced according to Table 3, plus or minus 114". For installations that must be raked to follow sloping grades, the
post spacing dimension must be measured along the grade. Fence panels shall be attached to posts with brackets supplied by the
manufacturer. Posts shall beset in concrete footers having a minimum depth of 36" (Note: In some cases, local restrictions of freezing
weather conditions may require a greater depth). The "Earthwork" and "Concrete" sections ofthis specification shall govern material
requirements for the concrete footer. Posts setting by other methods such as plated posts or grouted core -drilled footers are permissible
only if shown by engineering analysis to be sufficient in strength for the intended application.
3.03 FENCE INSTALLATION MAINTENANCE
When cutting/drilling rails or posts adhere to the following steps to seal the exposed steel surfaces; 1) Remove all metal shavings from
cut area. 2) Apply zinc -rich primer to thoroughly cover cut edge and/or drilled hole; let dsy. 3) Apply 2 coats of custom finish paint
snatching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. Ameristar spray cans or paint pens
shall be used to prime and finish exposed surfaces; it is recommended that paint pens be used to prevent overspray. Use of non-
Ameristar parts or components will negatethe manufactures' warranty.
Montage Commercial Specification .Ameristar Fence Products Rev_ 05/02/2014
AMERISTAR FENCE PRODUCTS°
Montage Commercial° — Commercial Steel Ornamental Fence System — Fusion Welded and Rackable
CONSTRUCTION SPECIFICATION - SECTION 32 3119
PART 1 - GENERAL
1.01 WORK INCLUDED
The contractor shall provide all labor, materials and appurtenances necessary for installation of the welded ornamental steel fence
system defined herein at (specify project site).
1.02 RELATED WORK
Section - Earthwork
Section - Concrete
1.03 SYSTEM DESCRIPTION
The manufacturer shall supply a total fence system of (specify Montage Commercial standard picket space or Montage Commercial
Pool, Pet & Play® 3" air space) Welded wtd Rackable (ATF All Terrain Flexibility) Ornamental Steel (for standard picket space,
specify Classier`, Majestic'", Genesis", or InvincibleT for 3" air space, specify Classic'`, Majestic", or Genesis) design. The
ornamental fence system shall be (specify 7' height or 8'height) from grade. The system shall include all components (i.e., panels,
posts, gates and hardware) required.
1.04 QUALITY ASSURANCE
The contractor shall provide laborers and supervisors who are thoroughly familiar with the type of construction involved and materials
and techniques specified.
1.05 REFERENCES
■ ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc -Coated (Galvanized) or Zinc -Iron Alloy Coated
(Galvannealed) by the Hot -Dip Process.
■ ASTM B 117 - Practice for Operating Salt -Spray (Fog) Apparatus.
■ ASTM D523 - Test Method for Specular Gloss. 0020
■ ASTM D714 - Test Method for Evaluating Degree of Blistering in Paint.
■ ASTM D822 - Practice for Conducting Tests on Paint and Related Coatings and Materials using Filtered Open -Flame Carbon -Arc
Light and Water Exposure Apparatus.
• ASTM D1654 - Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
• ASTM D2244 - Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates.
■ ASTM D2794 - Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).
■ ASTM D3359 - Test Method for Measuring Adhesion by Tape Test.
■ ASTM F2408 —Ornamental Fences Employing Galvanized Steel Tubular Pickets,
1.06 SUBMITTAL
The manufacturer's literature shall be submitted prior to installation,
1.07 PRODUCT HANDLING AND STORAGE
Upon receipt at the job site, all materials shall be checked to ensure that no damage occurred during shipping or handling. Materials
shall be stored in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism and
theft.
1.08 PRODUCT WARRANTY
A. All structural fence components (i.e. rails, pickets, and posts) shall be warranted within specified limitations, by the manufacturer
for a period of 20 years from date of original purchase. Warranty shall cover any defects in material finish, including cracking,
peeling, chipping, blistering or corroding.
B. Reimbursement for labor necessary to restore or replace components that have been found to be defective under the terms of
manufactures warranty shall be guaranteed for five (5) years from date of original purchase.
Montage Commercial Specification Ameristar Fence Products Rev, 05/02/2014