Loading...
HomeMy WebLinkAboutLight W1EJob Name Fixture Type Catalog Number Approved By Date Vandal Resistant BLD LED BLADE BLD WALL MOUNT / MULLION MOUNT LED LUMINAIRE-LED-BLADE-BLD-LED Rev. 11/14/22 Page 1 of 5 One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) | www.luminaireled.net © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. Description The Blade BLDcombines a sleek, patent pending design shaped with high performance, full cut off optics to achieve unobtrusive illumination of a space or path of egress. When mounted over a doorway or mullion, the fixture is perceived as an element of the building structure, and, additionally, provides water protection in the form of a drip cap over the entranceway. Multiple lengths are available to match a given door opening and our quick-mount system facilitates installation and maintenance. Housing Marine grade heat treated extruded aluminum. Chemically primed and finished with robotically applied polyester powder coat. Wall Mount Marine grade heat treated extruded aluminum. Chemically primed and finished with robotically applied polyester powder coat. Designed to provide quick mounting to housing and secured with (2) captive stainless steel TORX® head screws. Lens Frame Marine grade heat treated extruded aluminum. Secured to fixture (4) captive stainless steel TORX® head screws. Lens Extruded UV stabilized opal polycarbonate with integral prisms. Maximum wall thickness 0.160". Secured to housing with die cast aluminum clamps and stainless steel TORX® head screws. End Plate Die-cast marine grade aluminum. Chemically primed and finished with robotically applied polyester powder coat. Drivers Dimming to 1%, 10% or Programable Lumen Output driver options. Non-Dimming Driver is also available. LED Samsung LM561B+ series @ 2700K, 3000K, 3500K, 4000K, or 5000K and 82 CRI wired in parallel-series. L70 projected life of over 130,000 hours at 50ºC. Gaskets Closed cell self-adhesive neoprene to provide watertight seal between fixture and mounting surface. UL Listing U.L., C.UL. Wet Location Listing standard. Buy American Act Luminaire LED, LLC products are assembled in the USA. Our products meet the Buy America(n) government procurement requirements under FAR, DFARS, and DOT regulations. Please refer to www.acuitybrands.com/buy-american for additional information. Warranty Lifetime warranty, Luminaire LED incorporated will repair or replace any fixture damaged due to vandalism for the lifetime of the installation. 10-year warranty on LED boards against operational defects. Tested in accordance with LM-80. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Note Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. The product images shown are for illustration purposes only and may not be an exact representation of the product. Specifications subject to change without notice. SPECIFICATIONS A B C BLD12 20.0" 5.6"2.4" BLD24 30.8" 5.6"2.4" BLD36 41.6" 5.6"2.4" BLD48 52.4" 5.6"2.4" BLD72 74.0" 5.6"2.4" DIMENSIONAL DATA A B C 09/26/24 A-2024-0101 BLADE BLD Vandal Resistant BLD LED One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) | www.luminaireled.net © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. LUMINAIRE-LED-BLADE-BLD-LED Rev. 11/14/22 Page 2 of 5 ORDERING INFORMATION Series*Size (Nominal)* 1 Drivers* Dual Drivers Wattage (Nominal)1 Lumens (For PRD Only) BLD Mullion Mountable Vandal Resistant Full Cut-off Path of Egress Luminaire 12IN 2,3 24IN 4,5,6 36IN 7 48IN 8 72IN MIN1 Dimming to 1% MIN10 Dimming to 10% NODIM Non-Dimming Driver PRD Driver Programmed to Specific Lumen Output Consult Factory PRD not available with Wattage PRD standard 0-10V dimming to 1% 2DRV 9,10 Two LED drivers for independent LED board operations. 5W 20W 55W 10W 30W 15W 35W Required for all drivers except PRD driver 200LM - 6300LM - Lumens available in 100LM increments Lumens required if PRD driver chosen CCT* Voltage* Lens* Finish* 27K 2700K 30K 3000K 35K 3500K 40K 4000K 50K 5000K 120 120 Volt 277 277 Volt MVOLT 120-277 Volt 347 9,11,12 347 Volt DP Diffused Polycarbonate BLK Black WHT White BRZ Bronze GRY Gray SIL Silver CUST Custom Color, Consult Factory RALTBD Ral Paint finishes RALTBD for pricing only. Replace with applicable RAL call out when ready to order. See the RAL BROCHURE for available options Example: BLD 48IN MIN1 35W 27K 120 CLP WHT Emergency 13 EMB310 Self contained, 90 minute emergency battery pack. 0°C (32°F) to 55°C (131°F). 1000 lumens EMB20R 15,16 Remote mounted micro inverter that will operate a 25W maximum load for 90 min. 0°C (32°F) to 45°C (113°F) EMB310ST Self-testing, self contained, 90 minute emergency battery pack. 0°C (32°F) to 55°C (131°F) Meets CA Title 20 Standards. 1000 lumens EMB125R 16 Remote inverter that will operate a maximum 125W load for 90 min. 20°C (68°F) to 30°C (86°F) EMB310T20 Self contained, 90 minute emergency battery pack. 0°C (32°F) to 55°C (131°F). Meets CA Title 20 standards. 1000 lumens EMB250R 16 Remote inverter that will operate a 250W maximum load for 90 min. 20°C (68°F) to 30°C (86°F) EMB10ST Self-testing, self contained, 90 minute emergency battery pack. 0°C (32°F) to 55°C (131°F) Meets CA Title 20 Standards. 1000 lumens EMBDA 14,19 Two drivers and two emergency battery packs self-contained within fixture for independent light engine operation. Each battery pack will operate each light engine for a minimum of 90 minutes Knockout Fusing Photocell Sensors Hardware KO2 Optional mouse hole in both end caps for accessing 1/2” knockout GLR 17 Fuse and Fuse Holder PC 11,17 Photoelectric Switch PIR 18 Passive Infrared Occupancy Sensor/Daylight Harvesting Photocell. Maximum coverage 10' radius from 8' height. PIR50 9,18,19 Passive Infrared Occupancy Sensor/Daylight Harvesting Photocell. Maximum coverage 10' radius from 8' height. 50% of LED’s constantly on and 50% sensored on/off RCHRC required for Field Adjustable Settings PHSC Phillips Head instead of TORX® head OPTIONS *Required Ordering Notes 1. See Size and Wattage Chart 2. Not available with EMB10ST, EMB310, EMB310ST, or EMB310T20 3. 12IN with MIN1 or PRD; Not available with PIR 4. Not available with MIN1 or PRD and EMB10ST, EMB310, EMB310ST, or EMB310T20 5. Not available with 2DRV and PIR or PIR50 6. Not available with PIR or PIR50 and EMB10ST, EMB310, EMB310ST, or EMB310T20 7. 36IN with MIN1 or PRD; Not available with 2DRV and EMB10ST, EMB310, EMB310ST, EMB310T20 8. 48IN with MIN1 or PRD; Not available with 2DRV and PIR or PIR50 and EMB10ST, EMB310, EMB310ST, or EMB310T20 9. Not available with 12IN 10. 24IN with 2DRV; Not available with EMB10ST, EMB310, EMB310ST, or EMB310T20 11. Not available with PIR or PIR50 12. Not available in 24IN with 2DRV 13. Not available with 347 14. Only available in 72IN 15. Not available with Wattage or 25W or PRD 16. Not available with MVOLT 17. Not available with MVOLT or 347 18. Not available with EMB20R, EMB125R, EMB250R 19. Must include 2DRV Accessories: Order as separate catalog number. TXSD TORX® Screwdriver Bit Initial shipment includes one (1) TXSD per fixture RCHRC Remote Control for Field Adjustable Sensor Settings One (1) RCHRC per Job for PIR/PIR50 Sensor. Optional 09/26/24 A-2024-0101 BLADE BLD Vandal Resistant BLD LED One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) | www.luminaireled.net © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. LUMINAIRE-LED-BLADE-BLD-LED Rev. 11/14/22 Page 3 of 5 SIZE & WATTAGE CHART Size Wattage 12IN 5W | 10W 24IN 10W | 20W 36IN 15W | 30W 48IN 20W | 35W 72IN 30W | 55W Size Lumen Range 12IN 200LM - 1000LM 24IN 400LM - 2100LM 36IN 600LM - 3100LM 48IN 800LM - 4100LM 72IN 1200LM - 6300LM SIZE & LUMEN CHART (For PRD) PHOTOMETRIC DATA Model Watts Input Watts Delivered Lumens 2700K 3000K 3500K 4000K 5000K BLD 12IN 5W 6.5W 447 452 461 476 490 BLD 12IN 10W 11.8W 875 885 903 931 958 BLD 24IN 10W 10.6W 962 973 993 1024 1055 BLD 24IN 20W 21.3W 1885 1907 1946 2006 2066 BLD 36IN 15W 14.7W 1444 1461 1491 1537 1583 BLD 36IN 30W 29.6W 2828 2860 2919 3009 3099 BLD 48IN 20W 19.6W 1926 1948 1987 2049 2111 BLD 48IN 35W 36.4W 3770 3812 3890 4011 4132 BLD 72IN 30W 29.4W 2969 3003 3064 3159 3254 BLD 72IN 55W 57.1W 5789 5855 5974 6184 6345 BLD xxIN PRD Programmable Driver. Must Specify Lumens in Ordering Information, see Chart above. 09/26/24 A-2024-0101 BLADE BLD Vandal Resistant BLD LED One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) | www.luminaireled.net © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. LUMINAIRE-LED-BLADE-BLD-LED Rev. 11/14/22 Page 4 of 5 PHOTOMETRIC DATA Zone Lumens % Luminaire 0 - 30 69 14.5 0 - 40 149 31.1 0 - 60 359 75.5 60 - 90 117 24.5 0 - 90 476 100.0 90 -180 0 0.0 0 - 180 476 100.0 MODEL: BLD 12IN 5W 40K Delivered Lumens: 476 Lumens IES FILE: BLD 12IN 5W 40K Total Power: 7W Testing was performed in accordance with IES LM-79-08 Bug Rating: B0U0G1 Zone Lumens % Luminaire 0 - 30 377 124.5 0 - 40 640 41.6 0 - 60 1219 79.3 60 - 90 317 20.7 0 - 90 1537 100.0 90 -180 0 0.0 0 - 180 1537 100.0 MODEL: BLD 36IN 15W 40K Delivered Lumens: 1537 Lumens IES FILE: BLD 36IN 15W 40K Total Power: 14.7W Testing was performed in accordance with IES LM-79-08 Bug Rating: B0U0G1 Zone Lumens % Luminaire 0 - 30 739 24.6 0 - 40 1253 41.6 0 - 60 2387 79.3 60 - 90 622 20.7 0 - 90 3009 100.0 90 -180 0 0.0 0 - 180 3009 100.0 MODEL: BLD 36IN 30W 40K Delivered Lumens: 3009 Lumens IES FILE: BLD 36IN 30W 40K Total Power: 29.6W Testing was performed in accordance with IES LM-79-08 Bug Rating: B1U0G1 09/26/24 A-2024-0101 BLADE BLD Vandal Resistant BLD LED One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) | www.luminaireled.net © 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. LUMINAIRE-LED-BLADE-BLD-LED Rev. 11/14/22 Page 5 of 5 MOUNTING PLATE DETAILS ø 0.875 Center Wire Hole 16.00 1.78 ø 0.30 Mounting Hole (2) PLCS 16.00 1.78 32.00 1.78 32.00 32.00 64.00 1.78 1.78 ø 0.30 Mounting Hole (4) PLCS ø 0.875 Center Wire Hole ø 0.875 Center Wire Hole ø 0.30 Mounting Hole (2) PLCS ø 0.875 Center Wire Hole ø 0.30 Mounting Hole (2) PLCS ø 0.875 Center Wire Hole ø 0.30 Mounting Hole (2) PLCS 2.40 2.40 2.40 2.40 2.40 20.00 30.80 41.60 52.40 74.00 BLD12 BLD24 BLD36 BLD48 BLD72 09/26/24 A-2024-0101