HomeMy WebLinkAbout05-1170 City Code UDC
CITY OF MERIDIAN ORDINANCE NO.~
BY THE CITY COUNCIL: BIRD, DONNELL, ROUNTREE, WARDLE
AN ORDINANCE REPEALING EXISTING ZONING AND SUBDIVISION
REGULATIONS CODIFIED AT TITLE 11 AND TITLE 12 OF THE MERIDIAN
CITY CODE; RE-ENACTING A NEW TITLE 11 TO BE KNOWN AS THE
UNIFIED DEVELOPMENT CODE; AND PROVIDING AN EFFECTIVE DATE.
WHEREAS, in August 2002, the City of Meridian adopted a new
Comprehensive Plan, setting the future course for growth and development in the City of
Meridian and the Area of City hnpact; and,
WHEREAS, the new Unified Development Code will provide an opportunity to
better support the Comprehensive Plan and provide a tool that is relevant and
contemporary to the needs of the City; and,
WHEREAS, a draft of the proposed Unified Development Code was prepared in
April 2004 and was thoroughly reviewed and analyzed by a Process Improvement Group
consisting of City planning staff, an architect, an engineer, and representatives from the
development community; and,
WHEREAS, the Meridian Planning and Zoning Commission held two workshops
to review the proposed Unified Development Code beginning in February 2005, and also
held public hearings on April 18, 2005 and April 25, 2005; and,
WHEREAS, the Meridian City Council held public hearings on this matter on
July 26, 2005 and August 9, 2005.
NOW, THEREOFORE, BE IT ORDAINED BY THE MAYOR AND CITY
COUNCIL OF THE CITY OF MERIDIAN, IDAHO:
Section 1.
That Title 11 ofthe Meridian City Code is repealed.
Section 2.
ThatTitle 12 of the Meridian City Code is repealed.
Section 3. That Title 11 of the Meridian City Code is re-enacted and shall
read as presented on the following documents attached to this ordinance and incorporated
herein by this reference:
"City of Meridian Unified Development Code" dated August 29,2005; and,
Exhibit "A" - List of Proposed Changes; and,
Exhibit "B" - Enforcement; and,
Exhibit "c" - Private Streets; and,
Exhibit "E" - Comprehensive Plan Amendments.
(Note that Exhibit "D" has been intentionally deleted from this ordinance).
ORDINANCE - UNIFIED DEVELOPMENT CODE
Page I of2
Section 4. This ordinance shall be in full force and effect on the 15th day of
September, 2005, after its passage, approval and publication.
PASSED by the City Council of the City of Meridian, Idaho, this 30 ~ay
Of~l\~~) ,2005.
APPROVED by the Mayor of the City of Meridian, Idaho, this 3j-J.-\day of
Au 4f-1€:.L ,2005.
APPROVED:
-
ORDINANCE - UNIFIED DEVELOPMENT CODE
Page 2 of2
NOTICE AND PUBLISHED SUMMARY
OF ORDINANCE PURSUANT TO I.C. § 50-901(A)
CITY OF MERIDIAN ORDINANCE NO. 05- 1/7 tJ
- -- -P-RQVIDING FOR THE ENACTMENT OF THE UNIFIED DEVELOPMENT
~ CODE
--- ----- -----
An Ordinance of the Ciì)r- Of Meridian repealing existing zoning and subdivision
regulations codified at Title 11 and Title 12 of the Meridian City Code and re-enacting a
new Title 11 to be known as the Unified Development Code. The new ordinance
embodies the official zoning ordinance of the City of Meridian to provide for orderly
growth and development and to carry out the policies of Meridian's Comprehensive Plan.
A full text of this ordinance is available for inspection at City Hall, City of Meridian,
33 East Idaho Avenue, Meridian, Idaho. Th~~.QJ;dinance shall become effective on
September 15, 2005. ,\,\~\ Of ~"III
"" ~ "' --=- fit¥.. .1.1.1;,
$' à '" rÞ,,-POR;f)':. ~ ;'~
~ ~ ~o ~
- ;
STATEMENT OF MERIDIAN CITY ATTORNEY AS TO ADEQUACY OF
SUMMARY OF ORDINANCE NO. 05---.lJ]O
The undersigned, Ted W. Baird, Deputy City Attorney of the City of Meridian,
Idaho, hereby certifies that he is the legal advisor of the City and has reviewed a copy of
the attached Ordinance No. 05--1J] 0 of the City of Meridian, Idaho, and
has found the same to be true and complete and provides adequate notice to the public
pursuant to Idaho Code § 50-901A (3).
DATED this 7 1-;.."- day of~j.~--'-7 /"-7
--,...-,,--- - /,./'" ...,::4:--
./ ~ :;::::--~I"
(_....--e'"""'- .- . /. -
Ted W. Baird
Deputy City Attorney
SUMMARY - UNIFIED DEVELOPMENT CODE ORDINANCE
Page 1 of 1
¡
l"
, ,
, ,
..' ,"
..'rrt' -~"I(
/'"'- P /'" CITY OF ~ - - ~ .~"
\.-/Vl er¡diãn---:; \/
IDAHO ~I
,>, Y
~ A
Q~l:~ -'>(,..P'"
fie. 'fREA.<iURE " ~ i SINCE
, , 1903
CITY OF MERIDIAN
UNIFIED DEVELOPMENT CODE
TITLE 11 UNIFIED DEVELOPMENT CODE
Chapter 1 - General Regulations
Article A - Definitions
Article B - Nonconforming Property, Use or Structure
Chapter 2 - District Regulations
Article A. Residential Districts
Article B. Commercial Districts
Article C. Industrial Districts
Article D. Traditional Neighborhood Districts
Chapter 3 - Regulations Applying to All Districts
Article A. Standard Regulations in All Districts
ACCUMULATION OF JUNK
BIKEWAYS
CLEAR VISION TRIANGLE
DITCHES, LATERALS, CANALS OR DRAINAGE COURSES
FENCES
MULTIUSE AND MICRO PATHWAYS
NATURAL FEATURES
NOXIOUS USE
OUTDOOR LIGHTING
OUTDOOR SERVICE AND EQUIPMENT AREAS
OUTDOOR SPEAKER SYSTEMS
OUTDOOR STORAGE
PRESSURIZED IRRIGATION SYSTEMS
PUBLIC UTILITIES
PUBLIC WATER SUPPLY AND SEWER SYSTEMS
SELF-SERVICE USES
SIDEWALKS AND PARKWAYS
STORM DRAINAGE
STRUCTURES SUBJECT TO DESIGN STANDARDS
TRAVELING SLEEPING QUARTERS
UTILITIES
Article 8, Landscaping Requirements
Article C. Off-street Parking and Loading Requirements
Article D, Sign Requirements
Article E. Temporary Use Requirements
Article F. Private Street Requirements
Article G. Common Open Space and Site Amenity Requiremerì1s
Chapter 4 - Specific Use Standards
ANIMAL CARE FACILITY
ARTS, ENTERTAINMENT AND RECREATION FACILITY, INDOOR AND OUTDOORS
ARTIST STUDIO
BUILDING MATERIAL, GARDEN EQUIPMENT AND SUPPLIES
CEMETERY
CHURCH OR PLACE OF RELIGIOUS WORSHIP
CIVIC, SOCIAL AND FRATERNAL ORGANIZATIONS
CONTRACTOR'S YARD
DAY CARE FACILITY
2
8/29/05
DRINKING ESTABLISHMENT
DRIVE-THROUGH ESTABLISHMENT
DWELLING UNIT, SECONDARY
EDUCATION INSTITUTION
EQUIPMENT RENTAL, SALES, AND SERVICE
ENTERTAINMENT ESTABLISHMENT, ADULT
FINANCIAL INSTITUTION
FLEX SPACE
FOOD PRODUCTS, PROCESSING
FUEL SALES FACILITY AND FUEL SALES FACILITY, TRUCK STOP
HOME OCCUPATION
HOSPITAL
HOTEL OR MOTEL
INDUSTRY, INFORMATION
INDUSTRY, LIGHT AND HEAVY
LAUNDROMAT
MULTIFAMILY DEVELOPMENT
NURSERY OR URBAN FARM
NURSING AND RESIDENTIAL CARE FACILITY
PUBLIC OR QUASI-PUBLIC USE
PUBLIC UTILITY, MAJOR; AND PUBLIC INFRASTRUCTURE
RECYCLING CENTER; SOLID WASTE TRANSFER STATION
STORAGE FACILITY, OUTSIDE
STORAGE FACILITY, SELF-SERVICE
TERMINAL, FREIGHT OR TRUCK
VEHICLE IMPOUND YARD
VEHICLE REPAIR, MAJOR AND MINOR
VEHICLE SALES OR RENTAL
VEHICLE WASHING FACILITY
VEHICLE WRECKING OR JUNKYARD
VERTICALLY INTEGRATED RESIDENTIAL PROJECT
WAREHOUSE
WIRELESS COMMUNICATION FACILITY
Chapter 5 - Administration
Article A. General Provisions
Article B. Specific Provisions
CERTIFICATE OF ZONING COMPLIANCE
UNIFIED DEVELOPMENT CODE TEXT AMENDMENTS
ANNEXATIONS AND REZONES
VARIANCES
ALTERNATIVE COMPLIANCE
CONDITIONAL USES
Article C, Surety Agreements
Chapter 6 - Subdivision Regulations
Article A. General Provisions
Article B, Subdivision Process
Article C. Subdivision Design and Improvement Standards
Chapter 7 - Planned Unit Developments
3
8/29/05
SECTIONS:
11-1-1:
11-1-2:
11-1-3:
11-1-4:
11-1-5:
11-1-6:
11-1-7:
11-1-8:
11-1-9:
8/29/05
CHAPTER 1
GENERAL REGULATIONS
TITLE
PURPOSE
SCOPE AND CONTENT
APPLICABILITY
INTERPRETATION
ERRORS IN LEGAL DESCRIPTIONS OF PROPERTIES
REFERENCES
PRESERVATION OF PRIVATE PROPERTY RIGHTS
SAVING CLAUSE
11-1-1: TITLE: Upon adoption by the Meridian City Council, this portion of
the Meridian City Code (Title 11) is declared to be and shall hereafter constitute the
official zoning ordinance of the City of Meridian. Title 11 shall be known and cited as
the Unified Development Code of the City of Meridian. The Unified Development
Code of the City of Meridian is published by authority of the Meridian City Council,
and it shall be kept up to date as provided in Section 1-1-3 of the Official Meridian
City Municipal Code. Within this document, the Unified Development Code of the
City of Meridian shall be referred to as "this Title,"
11-1-2:
A.
PURPOSE:
Carry out the intent and purposes of the "Local Land Use Planning Act,"
Idaho Code §67-6501 et seq, as amended;
B.
Carry out the policies of the comprehensive plan by classifying and
regulating the uses of property and structures within the incorporated areas
of the City of Meridian;
C,
Establish districts within the City of Meridian in accord with the adopted
comprehensive plan in conformance with Idaho Code §67-6511;
D.
Provide standards for the orderly growth and development of the City of
Meridian. As required by Idaho Code §67-6511, such standards include, but
are not limited to, those regulating:
1. The height, number of stories, size, design, construction, reconstruction,
alteration, repair or location of structures,
2, Size, minimum lot dimensions, landscape buffers, size of required yards,
and density of residential properties,
3, The use of structures and property;
Chapter 1 GENERAL REGULATIONS
C.
D.
E.
2
8/29/05
E.
Ensure the most appropriate use of properties;
F,
Protect property rights and enhance property values;
G,
Provide a method of administration and prescribe penalties for the violations
of regulations hereafter described as authorized by the Constitution and
Laws of the State of Idaho; and
H,
Protect and promote health, safety and the general welfare.
11-1-3: SCOPE AND CONTENT: This Title shall consist of the text adopted
by Ordinance 05-1170 and Ordinance 05-1171, as amended from time to time, and
the Official Zoning Maps, as amended from time to time. Copies are available for
review at the Meridian City Hall. This Title and each and all of its terms are to be
read and interpreted in light of the designations of the Official Zoning Maps.
11-1-4: APPLICABILITY: The regulations of this Title shall apply and govern
development and use of all properties (a) within the corporate limits of the City of
Meridian and (b) outside the City limits for which annexation has been requested, or
as otherwise permitted through written agreement(s) with Ada County.
A.
No person or public agency shall construct, alter, move, or change the use
of a structure or undertake any development unless:
1. The proposed use, structure, or division of property complies with this Title,
2, Any required approval is first obtained as provided by CHAPTER 5
ADMINISTRATION of this Title, and any applicable conditions of approval are
met.
8,
Nothing in this Title shall eliminate the need for obtaining any other required
permits, including, but not limited to, building permits, plumbing, electrical, or
mechanical permits, grading permits, or any permit, approval, or entitlement
required by other titles of the Meridian City Municipal Code, other political
subdivisions of the State of Idaho, or agencies of the State of Idaho.
All properties in the Meridian City corporate limits shall comply with the
regulations of this Title unless otherwise preempted by Federal statute or
local law statutory ordinance,
The prosecution of violations that occurred under previous land use
regulations and that remain a violation under this Title shall continue until
resolved.
Applications pending as of the effective date of this Ordinance, September
15, 2005:
Chapter 1 GENERAL REGULATIONS
8/29/05
1, Project with pending application. All applications shall be processed
according to the regulations and requirements in effect as of the date the
Director accepted the application,
2. Approved project with pending request for a time extension, Time extension
requests shall be consistent with the requirements that are in effect when
the original application was approved,
3, Approved projects not yet completed. Any approved application may still be
completed as provided by the approval.
11-1-5:
INTERPRETATION:
A.
Language,
1, Terminology, When used in this Title, all words used in the present tense
shall include the future; words used in the singular number shall include the
plural number and the plural the singular, unless the natural construction of
the sentence indicates otherwise, The word "shall" is mandatory, and the
word "may" is permissive,
2. Number of days, Whenever a number of days is specified in this Title, or in
any permit, condition of approval, or notice issued or given as provided in
this Title, the number of days shall be construed as calendar days, except
that such time limits shall extend to the following working day when the last
of the specified number of days falls on a weekend or Meridian City holiday.
3. Minimum requirements, When interpreting and applying the regulations of
this Title, all regulations shall be considered to be minimum requirements,
unless stated otherwise, Proposed uses shall comply with all applicable
regulations and standards unless specifically exempt elsewhere in this Title.
4, Defined terms, Terms defined in Section 11-1A-1 of this Title shall have their
defined meaning when used elsewhere in this Title, For the purpose of
readability and clarity, such terms are not shown in initial caps.
5. Section headings, Section headings or captions are for reference purposes
only and shall not be used in the interpretation of this Title.
6. References. All references to State or Federal laws and/or regulations shall
refer to such laws and/or regulations as they may be amended over time,
B,
Measurements
1, Structure height shall be measured in accord with the Meridian City Building
Code as set forth in Title 10, Chapter 1, of the Meridian City Municipal Code,
3
Chapter 1 GENERAL REGULATIONS
8/29/05
2. Linear distance shall be measured in a horizontal line; it shall not be
measured along an inclined surface or line, For uses that have a separation
standard, the distance shall be measured from the nearest customer
entrance of the proposed use to the nearest property line of the specified
use. The measurement is to be conducted in a radial fashion by the
specified number of feet (e.g" 300 feet, 1,000 feet).
c,
District boundaries, Where uncertainty exists about the location of any
district boundary shown on the Official Zoning Map, the following rules shall
be used to resolve the uncertainty:
1, Where a district boundary approximately follows a property line, such
property line shall be construed as the district boundary,
2, Where a district boundary approximately follows a street, alley, or railroad
line, such street, alley, centerline, or the extension of such line shall be
construed as the district boundary.
3. Where a district boundary approximately follows a watercourse, the
centerline of the watercourse shall be construed to be such boundary. In the
event of a change in the watercourse shoreline, the boundary shall be
construed as moving with the actual shoreline,
4, Where a district boundary does not obviously coincide with any of the above
lines (property; street, alley, or railroad line; watercourse), or where it is not
designated by dimensions, it shall be deemed to be located along the
nearest section, quarter section, or sixteenth section line.
D,
Conflicting regulations,
1, In case of conflict between the text and the maps of this Title, the maps shall
prevail.
2. If conflicts occur between different regulations of this Title, or between this
Title and other regulations of the Meridian City Municipal Code, the most
restrictive regulation shall apply.
3. It is not intended that this Title interfere with, abrogate, or annul any
easements, covenants, or other agreements between parties; however,
where this Title imposes a greater restriction upon the use of structures or
premises or upon the height of structures, or requires larger space than is
imposed or required by ordinances, rules or regulations, or by easements,
covenants, or agreements, the regulations of this Title shall govern,
E.
Allowed Uses. If a proposed use of property is not specifically listed in
CHAPTER 2 district regulations, the use shall be prohibited, except as
follows: the Director may determine that a proposed use not listed in
4
Chapter 1 GENERAL REGULATIONS
8/29/05
CHAPTER 2 district regulations, is equivalent to a principal permitted or
conditional use, In making the determination, the Director shall consider the
following:
1. The impacts on public services and activities associated with the proposed
use are substantially similar to those of one or more of the uses listed in the
applicable base districts as allowed;
2, The proposed use shall not involve a higher level of activity or density than
one or more of the uses listed in the applicable base districts as allowed;
3. The proposed use is within the same three- digit category of an allowed use
listed in the latest edition of the North American Industrial Classification
System (NAIC), published by the United States Department of Commerce;
4, The proposed use is consistent with the purpose of the district in which the
use is proposed to be located; and
5, The proposed use is in substantial conformance with goals and objectives of
the Comprehensive Plan.
11-1-6: ERRORS IN LEGAL DESCRIPTIONS OF PROPERTY: Where a
property has not been zoned because of an error in a legal description, the
following shall apply:
A.
If the error is caused by the City, the error shall be corrected and duly
processed by the City as soon as the error is discovered,
8,
If the error is caused by the applicant and/or owner, the applicant shall apply
for an Official Zoning Map amendment and submit the proper fees pursuant
to CHAPTER 5 administration of this Title,
11-1-7: REFERENCES: References in this Title to other ordinances or codes
of the City of Meridian and statutes of the State of Idaho are provided solely for the
coordination of this Title with such other ordinances and statutes. Any amendments
to cited codes that are adopted subsequent to the adoption of this Title shall be
applicable to this Title,
11-1-8:
PRESERVATION OF PRIVATE PROPERTY RIGHTS:
A.
This Title shall be interpreted to equally protect citizens from the undue
encroachment on their private property by their neighbors' use of their
private property and equally protect each citizen's right to use of their
property without creating undue burden upon their neighbors.
8,
In the administration of this Title, every person shall be secure in their
premises, and no employee of the City shall enter upon, investigate, or
5
Chapter 1 GENERAL REGULATIONS
C.
D.
E.
11-1-11:
A.
6
8/29/05
search any of the premises of any citizen without the consent of such citizen
or order issued by a court of proper jurisdiction,
C,
Every citizen of Meridian City shall have the right to appear in person or be
represented by their agent before the Council in the proper order of
business to appeal a decision pursuant to the procedures contained in
CHAPTER 5 administration of this Title,
D,
In the enforcement of this Title, it shall be deemed to apply equally to each
citizen and each property in similar circumstances, and shall not be enforced
to discriminate between one individual and/or another individual or other
group as compared to all others,
11-1-9: SAVING CLAUSE: Should any section, clause, or regulation of this
Title be declared by a court of competent jurisdiction to be invalid, the same shall
not affect the validity of this Title as a whole, or any part thereof, other than the part
so declared to be invalid, each section, clause, or regulation hereof being declared
severable.
11-1-10:
VIOLATIONS:
A.
It is a violation of the Unified Development Code for any person to initiate or
maintain or cause to be initiated or maintained the use of any structure, land
or real property within the City of Median without first obtaining proper
permits or authorizations required for the use by this Title.
B.
It is a violation of the Unified Development Code for any person to use,
construct, locate, demolish or cause to be used, constructed, located, or
demolished any structure, land or property within the City of Meridian in any
manner that is not permitted by the terms of any permit or authorization
issued pursuant to this Title or previous codes,
It is a violation of the Unified Development Code for any person to not
comply with specific conditions of approval as stated in a Certificate of
Zoning Compliance, Conditional Use Permit, Final Plat, or Planned
Development as set forth in this Title.
It is a violation of the Unified Development Code to misrepresent any
material fact in any application, plans or other information submitted to
obtain any land use authorization as set forth in this Title.
It is a violation of the Unified Development Code for anyone to fail to comply
with the requirements of the development code, as set out in the specific
sections of this Title.
CODE ENFORCEMENT:
Duty to Enforce:
Chapter 1 GENERAL REGULATIONS
8/29105
1, It shall be the duty of the Planning Director to interpret this Title.
2. It shall be the duty of the Code Enforcement Division of the Police
Department to enforce the regulations of this Tile, as set forth in Section 11-
1-11 of this Title. Code Enforcement officers may call upon the services of
the planning, fire, parks or other appropriate city departments to assist in
enforcement.
3. It is the intent of this Title to place the obligation of complying with its
requirements upon the owner, occupier or other person responsible for the
condition of the land and buildings within the scope this Title,
8,
Investigation:
1. The code enforcement officer shall investigate any structure or use which he
or she reasonably believes does not comply with the standards and
requirements of this Title.
2. If, after investigation, it is determined that the standards or requirements of
this Title have been violated, a code enforcement officer shall serve a notice
of violation upon the owner, tenant or other person responsible for the
condition. The notice of violation shall state separately each standard or
requirement violated; shall state what corrective action, if any, is necessary
to comply with the standards or requirements; and shall set a reasonable
time for compliance, The notice shall state that any further violation may
result in criminal prosecution and/or civil penalties.
3. The notice shall be served upon the owner, tenant or other person
responsible for the condition by personal service, registered mail, or certified
mail with return receipt requested addressed to the last known address of
such person. If, after a time and effort is made to serve or mail notice
without success, then notice may be made by publication in the newspaper
of record for the City of Meridian. The Code Enforcement officer will record
all efforts made to effect service in person or by mail as part of their
investigative report,
C,
Extension of Compliance Date:
1, The Planning Director may grant a reasonable extension of time for
compliance with any notice or order, whether pending or final, upon finding
that substantial progress toward compliance has been made and that the
public will not be adversely affected by the extension. Such extension of
time shall not exceed one hundred and eighty (180) days.
2. An extension of time may be revoked by the Planning Director if it is shown
that any of the following are true: the conditions at the time the extension
was granted have changed, the Code Enforcement officer determines that a
party is not performing corrective actions as agreed and so notifies the
7
Chapter 1 GENERAL REGULATIONS
8
8/29/05
Planning Director, or if the extension creates an adverse effect on the public.
The date of revocation shall then be considered as the compliance date.
11-1-12:
PENAL TIES:
A.
A violation of the provisions of this Title is declared a Misdemeanor. Any
person violating or failing to comply with any of the provisions of this Title
shall be subject to criminal prosecution and upon conviction shall be fined in
a sum not exceeding one thousand dollars ($1,000,00) or be imprisoned for
a term not exceeding six (6) months or be both fined and imprisoned, Each
day of noncompliance with any of the provisions of this Title shall constitute
a separate offense.
B.
Notwithstanding the provisions of Subsection A above, the City Attorney, at
his or her sole discretion, may civilly prosecute any violation of this Code
and seek all available remedies that may include, but are not limited to
abatement of the non-compliant conditions, revocation of existing permits for
non-compliance, civil damages for enforcement, or any other remedy as
allowed by law.
C.
The City may file a lien upon any real property owned by convicted person if
they fail to comply with the penalty as set forth in this Section.
Chapter 1 GENERAL REGULATIONS
8/29/05
CHAPTER 1
GENERAL REGULATIONS
ARTICLE A. DEFINITIONS
ARTICLE A. SECTIONS:
11-1A-1: DEFINITIONS
11-1A-2: FIGURE 11-1A-1 AND FIGURE 11-1A-2
11-1A-1: DEFINITIONS: As used in this Title, each of the terms defined shall
have the meaning given in this section unless a different meaning is clearly required
by the content. Where terms are not defined, they shall have their ordinary
accepted meanings within the context with which they are used. The most current
version of the Merriam-Webster's Unabridged Dictionary of the English Language
shall be considered as providing accepted meanings, References to the NAIC are
North American Industrial Classification System (NAIC), published by the United
States Department of Commerce,
ABANDONED
To cease or discontinue a use or activity for twelve (12) months without apparent intent to
resume. See also sign, abandoned,
ABUT OR ABUTTING
Having a common border with the subject property.
ACCESSORY
STRUCTURE
A detached structure in a residential base district that is incidental and subordinate to the
principal structure and is located upon the same property, The term accessory structure shall
include, but not be limited to, the following: private garage, storage structure, workshop, and/or
greenhouse. The term shall not include additional structures for approved public, commercial,
or industrial uses,
ACCESSORY USE
A use that is incidental and subordinate to the principal use, and is conducted upon the same
property,
ADA COUNTY STREET
NAME COMMITTEE
An advisory group on street naming,
ALLEY
A public or private way affording only secondary means of access to abutting property at the
back or side of a property.
ALLOWED USE
Any use listed in Tables 11-2A-2, 11-2B-2, 11-2C-2 and 11-20-2, as a principal permitted,
conditional, or an accessory use,
ALTERATIONS,
STRUCTURAL
Any change, other than incidental repairs, which would prolong the life of the supporting
members of a building or structures, such as bearing walls, columns, beams, and girders,
ALTERNATIVE
COMPLIANCE
An administrative determination that a specific application achieves or exceeds specific
requirements as set forth in this Title, Consideration of alternative compliance is limited in
circumstances as identified in this Title.
Chapter 1 Article A. DEFINITIONS
ANIMAL CARE FACILITY
ANNEXATION
ANTENNA
ANTENNA,
OMNI-DIRECTIONAL
ANTENNA, ANCILLARY
ANTENNA, DIRECTIONAL
ANTENNA, PARABOLIC
APPROACH
APPROVED USE
ARTERIAL
ARTISTS STUDIO
ARTS, ENTERTAINMENT
AND RECREATION
FACILITIES
(NAICS CODE 71)
AWNING
AUTOMATED TELLER
MACHINE (ATM)
2
8/29/05
Any structure, or portion thereof, that is designed or used for the boarding, care, grooming,
diagnosis or treatment of animals, including but not limited to sick, ailing, infirm or injured
animals, and those that are in need of medical or surgical attention, The term animal care
shall include but not be limited to an animal clinic, animal hospital, or veterinary office or
kennel.
The process by which the City's corporate boundary is expanded to incorporate additional
property pursuant to Idaho Code §50-222,
A transmitting or receiving device used in telecommunication that radiates or captures radio or
other signals, including omni-directional or whip, directional or panel, parabolic or dish, and
ancillary antennae.
Also known as a whip antenna, Receives and transmits signals in a 360 degree pattern of
varying lengths and typically less than 4 inches in diameter.
An antenna that is less than 12 inches in its largest dimension and that is not directly used to
provide personal wireless communication services (I.e., cell phone service,) An example
would be a global positioning antenna,
Also known as panel antenna, Receives and transmits a signal in a directional pattern typically
encompassing an arc of 120 degrees.
Also known as dish antenna. A bowl-shaped device that receives and transmits signals in a
specific directional pattern.
Approach: A connection between the outside edge of the shoulder or curb line and
the abutting property at the highway right-of-way line, intended to provide access to
and from said highway and the abutting property, An approach may include a
driveway, alley, street, road or highway,
The term approved use as used in this Article shall include, but not be limited to: a principal
permitted use with a certificate of zoning compliance; an approved conditional use; or an
approved accessory use.
See street, arterial.
The use of the site for small~scale, craftsman-operated production of materials, assembly of
parts, or the blending of materials, including metal, plastics, computer components,
electronics, oils, and resins. Uses included are furniture refinishing, machine shops, cabinet-
makers, frame shops, and works of art,
The use of a site or facility for entertainment, spectator sports or recreational activities, The
use includes, but is not limited to: amusement parks, carnivals, motion picture and performing
arts theaters, racetracks, sports fields, golf courses, fitness clubs, museums, zoos, marinas,
bowling, video and other games and amusements,
A projecting cover extending over a door, window or wall section with support attached to the
structures and used as cover, protection, or as decoration.
A pedestrian-oriented banking device operated by a financial institution for use by its
customers for conducting transactions. The machines may be located at or within the financial
institutions, or in other locations, A TMs for use by customers in vehicles are included in the
definition of drive-through establishment,
Chapter 1 Article A. DEFINITIONS
BABYSITTING
BARRIER
BERM
BUFFER
BUilDING
BUilDING ENVELOPE
BUilDING MATERIAL,
GARDEN EQUIPMENT,
AND SUPPLIES (NAICS
CODE 444)
BUILDING OFFICIAL
CALIPER
CANOPY
CASH ESCROW
CEMETERY
CERTIFICATE OF
OCCUPANCY
CERTIFICATE OF
ZONING COMPLIANCE
CHORD MEASUREMENT
CHURCH OR PLACE OF
RELIGIOUS WORSHIP
3
8/29/05
1) The act of caring for up to three (3) children at the home of the babysitter while the parents
or usual guardians are absent on a sporadic or occasional basis; or 2) The act of caring for
sibling children at their home or at the home of a relative. Babysitting is not regulated by this
Title, .
A vertical element including, but not limited to, a fence, wall, structure, or a combination
thereof, that completely surrounds an area and controls access to such area,
An earthen mound designed to provide visual interest, screen undesirable views, and/or
decrease noise,
A combination of physical space and vertical elements, including but not limited to, trees,
shrubs, berms, artwork, fountains, seating and/or other landscape features,
A building shall be as defined by Title 10 BUILDING REGULATIONS, Chapter 1, of the Meridian City
Code,
The area on a property exclusive of the required yards, setbacks, buffers, and unbuildable
areas, See Figure 11-1A-1,
The use of a site for the retail sale and service of merchandise used in home and garden
improvements. The use includes home and garden centers; hardware stores; lawn and garden
equipment supply stores; paint and wallpaper stores; lumber yards; nursery, garden and farm
supply stores,
The officer or other designated authority charged with the administration and enforcement of
the Building Code as established by Title 7 of the Meridian City Code or the Building Official's
duly authorized representative,
A measurement of the diameter of the trunk of a deciduous tree, The caliper of the trunk shall
be measured six (6) inches above the ground for all trees up to and including 4-inch caliper
size, and 12 inches above the ground for larger sizes,
A roof-like structure projecting from the exterior surface of a building, but not attached to the
building or freestanding, constructed of a supporting framework and covered with nonrigid
materials,
Cash or certified check submitted to the City Clerk for incomplete landscape improvements in
order to secure a temporary Certificate of Occupancy.
The use of a site for the interment of human remains or cremated remains, The use includes
burial parks, mausoleum for vault or crypt interments, columbarium for cinerary interments or a
combination thereof,
Official certification that a building and site conform to the provisions of City Codes, including
appropriate conditions such as a development agreement, and/or conditional use permit.
A document issued by the Director that certifies that the structure or use meets the
requirements of this Title.
A straight line measurement from the beginning point of a curvature to the ending point of a
curvature.
An establishment that by design and construction is primarily intended for conducting
organized religious services, meetings, and associated activities and that is recognized as a
religious corporation or society of the State of Idaho with a state tax exempt status in accord
with Idaho Code §63--602B,
Chapter 1 Article A. DEFINITIONS
CITY
CITY ENGINEER
CIVIC, SOCIAL AND
FRATERNAL
ORGANIZATIONS (NAICS
CODE 813)
CLEAR VISION TRIANGLE
COlOCA TION
COMMERCIAL VEHICLE
COMMISSION
COMMON DRIVE
COMPREHENSIVE PLAN
CONDITIONAL USE
CONDOMINIUM
CONTIGUOUS LAND
CONTRACTOR
CONTRACTOR'S YARD
CORNER PROPERTY
COUNCil
CUL-DE-SAC
4
8/29/05
The City of Meridian, Idaho,
The City Engineer of the City of Meridian, Idaho, or an authorized representative of the
Meridian Public Works Department.
A facility owned or operated by an organized association of persons for a social, literary,
political, educational or recreational purpose primarily for the exclusive use of members and
their guests; and not primarily operated for profit nor to render a service that is customarily
carried on as a business.
The boundaries of an area at the intersection of (a) two (2) public streets; (b) the intersection
of a public street and driveway; (c) the intersection of a public street and alley; or (d) at the
crossing of a railroad over a street, where visual observations are limited and specified by this
Title for the purpose of protecting public health and safety, Also known as a sight vision
triangle. See Figure 11-3A-1,
The use of a single tower to support more than one wireless telecommunication service
provider's equipment, or the mounting of an antenna to a preexisting structure.
See vehicle, commercial,
The Planning and Zoning Commission of the City of Meridian, Idaho,
An access shared by adjacent property owners that is privately owned and maintained,
The duly adopted comprehensive plan for the City of Meridian, Idaho, pursuant to the "local
land Use Planning Act," Idaho Code §67-6501 et seq. as amended,
A use that, owing to some special characteristics attendant to its operation or installation (for
example, potential danger, hours of operation, or noise), is allowed in a district subject to
approval by the Planning and Zoning Commission and subject to special requirements in
conformance with Chapter 5, Article B of this Title and as enabled by Idaho Code §67-6512.
An estate in real property as defined in Idaho Code §55~ 101 B that is not a subdivision.
Unplatted parcels held in one ownership that abut each other at a common boundary,
A person who agrees to furnish materials or perform services at a specified price, especially
for construction, The term contractor shall include, but not be limited to, building, landscaping,
electrical, plumbing, heating, or air conditioning contractors.
Any area of land used by a contractor for storage, maintenance, or processing incidental to
the business of building, hauling, excavation, demolition, or similar activity and including any
area of land used for minor pre-installation work or repair of machinery used for any of the
above listed activities,
See property, corner,
Meridian City Council.
See street, cul-de-sac,
Chapter 1 Article A. DEFINITIONS
DAY CARE FACILITY
DECISION-MAKING BODY
DEDICATION
DENSITY
DENSITY, GROSS
DEVELOPMENT
DEVELOPMENT
AGREEMENT
DEVELOPMENT
APPLICATION
DIRECTOR
DISTRICT OR ZONE
DRINKING
ESTABLISHMENT
DRIVE-THROUGH
ESTABLISHMENT
DUSTLESS MATERIALS
DWELLING OR
DWELLING UNIT
DWELLING, MULTIFAMILY
5
8/29/05
Any home, structure or place where nonmedical care, protection or supervision is regularly
provided to children under twelve years of age, or disabled persons of any age, for periods of
less than twenty-four (24) hours per day, while the parents or guardians are not on the
premises. There are three types of day care facilities distinguished by the number of
individuals served:
Day care center: more than twelve (12),
Day care, group: more than six (6) but no greater than twelve (12),
Day care, family: six (6) or fewer.
The Director, Commission, or Council, as set forth in Chapter 5 of this Title,
The setting apart of land or interests in land for public use, charitable, religious, or educational
purposes.
The number of dwelling units per acre of land.
The ratio of the total number of dwelling units within a development divided by the total area,
including streets; alleys; easements; waterways; and common spaces,
Any construction or installation of a structure, or any change in use of a structure, or any
subdivision of property, or any change in the use of the land that creates additional demand
and/or need for public facilities,
A written agreement as a condition of annexation or rezone between the Council and an
owner or applicant concerning the use or development of a property in accord with Idaho Code
§67-6511A and Chapter 5 ADMINISTRATION of this Title.
An application for development that requires approval and/or action by the Director,
Commission, or Council.
The Director of the Meridian City Planning Department or an authorized representative.
The zone district classification, listed in Chapter 2 of this Title, in effect on any given property,
The use of a site primarily for the sale or dispensing of alcohol by the drink or giass, The use
includes, but is not limited, to bar, brewery, lounge, night club, and tavern,
The use of a portion of a structure where business is transacted, or is capable of being
transacted, directly with customers located in a motor vehicle, The term drive-through
establishment shall include, but not be limited to, providing food or beverage service, bank
service, and/or film processing, The term drive-through establishment shall not include fuel
sales facility or vehicle washing facility as herein defined,
Hard sulfaces used for driveways, loading and parking including but not limited to concrete,
asphalt, grasscrete, pavers, bricks, and macadam,
Any structure, or portion thereof, providing independent living facilities for one family as herein
defined, including provisions for living, sleeping, eating, cooking, and sanitation, See Figure
11-1A-2, of this Title, forty pes of dwellings,
A structure, or portion thereof, that contains three (3) or more dwelling units or apartments,
where all such units are located on the same property. For the purposes of this Title, a
multifamily dwelling shall be deemed multifamily development.
Chapter 1 Article A. DEFINITIONS
DWELLING, SECONDARY
DWELLING, SINGLE-
FAMILY ATTACHED
DWELLING, SINGLE-
FAMILY DETACHED
DWELLING, TOWNHOUSE
DWELLING, TWO-FAMILY
DUPLEX
EASEMENT
EDUCATION
INSTITUTION, PRIVATE
(NAICS CODE 61)
EDUCATION
INSTITUTION, PUBLIC
(NAICS CODE 61)
EMPLOYEE
ENTERTAINMENT, ADULT
EQUIPMENT SALES,
RENTAL AND SERVICES
FAMILY
FENCE
FENCE, CLOSED VISION
FENCE, OPEN VISION
FENCE, NON-SCALABLE
6
8/29/05
A habitable dwelling unit established in conjunction with and subordinate to a single-family
dwelling unit. The term shall include guest house, granny flat, carriage house, garage
apartment and caretaker unit.
A structure containing two (2) dwelling units attached by a common wall or walls, where each
dwelling unit is located on a separate property,
A detached structure that accommodates a single dwelling,
A structure containing three (3) or more dwelling units attached by common walls where each
dwelling unit is located on a separate property,
A structure containing two (2) dwelling units attached by a common wall, where both dwelling
units are located on the same property,
A right of use, falling short of ownership, and usually for a certain stated purpose, as defined
by Idaho Code §50-1301.
The use of a site for education purposes not supported by the State of Idaho. The use
includes, but is not limited to, elementary and secondary schools; institutions of higher
learning; professional, technical and trade schools; driving schools; fine arts schools and
studios,
The use of a site for education supported by the state of Idaho, The use includes, but is not
limited to, elementary and secondary schools; institutions of higher learning; and vocational
schools.
A person employed on the premises by the property owner and receiving not less than
seventy-five percent (75%) of the employee's annual income from said property owners,
Adult entertainment shall be as defined in Title 3, Chapter 10 of the Meridian City Code,
The use of a site for the sale, rental or servicing of tools, trucks, tractors, construction
equipment, agricultural implements, or similar industrial equipment.
1) A person living alone or two or more persons related by blood or marriage; 2) A group of not
more than ten (10) persons who need not be related by blood or marriage living together in a
dwelling unit; 3) Eight (8) or fewer unrelated mentally and/or physically handicapped or elderly
persons residing in a dwelling under staff supervision, provided that no more than two (2) staff
members reside in the dwelling at anyone time,
An enclosure or barrier constructed of wood, masonry, stone, wire, metal or other
manufactured materials used to enclose, screen or separate areas, Walls, latticework, and
screen are considered fences,
A fence that does restrict or impede vision or sight through the fence by twenty percent (20%)
or more,
A fence that does not restrict or impede vision or sight through the fence by more than twenty
percent (20%),
A fence erected as a barrier to unauthorized access by persons or vehicles, usually six feet
(6') in height and often made of wrought iron or woven wire,
Chapter 1 Article A. DEFINITIONS
FENCE, SOLID
FINAL PLAT
FINANCIAL INSTITUTION
(NAICS CODE 52)
FLAG, CONVENTIONAL
FLAG, DECORATIVE
FLAMMABLE
SUBSTANCE STORAGE
FLEX SPACE
FLOOR AREA, GROSS
FOOD PRODUCTS,
PROCESSING
(NAICS CODE 311)
FOOTPRINT
FREIGHT TERMINAL
FRONT PROPERTY LINE
FRONTAGE
FRONTAGE STREET
FULL CUT-OFF SHIELD
FUEL SALES FACILITY
FUEL SALES FACILITY,
TRUCK STOP
GIRDLING
7
8/29/05
A fence that effectively conceals from viewers in or on adjoining properties and streets,
materials stored and operations conducted behind it.
See plat, final,
The use of a site for lending, exchanging and handling money or currency for customers. The
use includes, but is not limited to, credit unions, savings and loan, commercial banks, cash
machines, insurance agents, and loan establishments,
Any fabric or bunting containing distinctive colors, patterns, or emblems used as a symbol of a
government, political subdivision, or other such entity,
Any fabric or bunting containing distinctive colors, patterns, or symbols used to communicate
business identification and/or attract, distract, hold, direct or focus public attention.
An establishment, or portion thereof, wherein combustible substances (as defined by the
Uniform Fire Code) are stored.
The use of a site for warehousing, offices, and/or retail showroom. Flexibility in use of the
interior spaces and low-scale, attractive exterior appearance characterize flex buildings,
The measure of total square footage of habitable space of a structure,
The use of a site for producing, manufacturing, processing or storage of food products, The
use includes, but is not limited to beverages, coffee, ice, snacks, fruits, vegetables, spices,
confectionary, and dairy products, Excluded uses are animal products, seafood, milling and
refining,
Area of the ground covered by a structure, including the foundation and all areas enclosed by
exterior walls and/or footings,
See terminal, freight or truck,
See property line, front,
The front of the property, measured along the street from side property line to side property
line. On corner lots and through lots, all sides of a lot adjacent to streets shall be considered
frontage,
See street, frontage.
In its installed position, a light fixture with a full cut-off shield will not allow any direct light
above a horizontal plane and no more than five percent (5%) of the total light output may
come from the zone from fifteen (15) degrees below the horizontal to the horizontal plane, See
Figure 11-3A-4, of this Title,
A retail establishment that sells and supplies motor fuel, lubricating oils, and/or grease to on-
premise trade, The use may also include an accessory convenience store selling a limited line
of groceries and self- service food items,
A retail establishment that sells and supplies motor fuel, lubricating oils, and/or grease to on-
premise trade, primarily to trucking industry, The use may also include accessory repair
shops, automated washes, convenience store, restaurant and/or motel.
Damaging or removing the bark and cambium layer around a tree trunk in a manner that
usually kills the tree,
Chapter 1 Article A. DEFINITIONS
GLARE
GRADE
GRANDFATHER RIGHTS
GRAND OPENING
GROSS LAND AREA
HARDSHIP
HEAD-TO~HEAD SPACING
HEALTH AUTHORITY
HEALTH CARE AND
SOCIAL SERVICES
(NAICS CODE 62)
HEAVY INDUSTRY
HEIGHT, WIRELESS
COMMUNICATION
FACILITY
HOME OCCUPATION
HOSPITAL
HOTEL OR MOTEL
8
8/29/05
Light emitted from a fixture with intensity great enough to cause visual discomfort, eye fatigue,
reduction in a viewer's ability to see and, in extreme cases, momentary blindness.
The elevation of the finished surface of the ground adjacent to the midpoint of any exterior wall
of a building or structure.
See Chapter 1, Article B nonconforming property, use, or structure of this Title,
A promotional activity used by newly established businesses, within two (2) months after
occupancy, to inform the public of their location and service available to the community, Grand
opening does not mean an annual or occasional promotion of retail sales by a business,
The total area of the land being developed, exclusive of required street buffers and buffers
between incompatible land uses, The calculation for required open space in residential
subdivisions and multifamily residential development is based on the gross land area of the
land being developed.
An unusual situation on an individual property that will not permit the property owner to enjoy
the full utilization of their property as is enjoyed by others in the same District. A hardship can
exist only when it is not self-created, Examples of hardship include unusual shape of the
property. natural features, or other exceptional physical conditions on the property.
Placement of sprinkler heads in a rectangular pattern such that one sprinkler head sprays to
the next (spacing is fifty percent (50%) of the sprinkler's spray diameter).
The Central District Health Department, the Idaho Department of Health and Welfare, the
United States Environmental Protection Agency, and any agency as may succeed to any of
their powers, The term health authority shall be liberally construed to include all of the
adopted, approved or certified plans, rules, regulations, statutes or laws of the health
authority,
The use of a site for ambulatory health care services, Included in this use are offices of
dentists; physicians; chiropractors; optometrists; mental health practitioners; physical,
occupational and speech therapists; audiologists; outpatient care centers; family planning
centers, medical and diagnostic laboratories, imaging centers, kidney dialysis centers; blood
and organ banks,
See industry, heavy,
The vertical distance measured from finished grade to the top of the pole, structure, or tower,
including the antenna,
An occupation, profession, activity, or use that is clearly an incidental and secondary use of a
residential dwelling unit and that does not alter the exterior of the property or affect the
residential character of the neighborhood,
A medical institution licensed by the State that is devoted to the maintenance and operation of
facilities for the medical or surgical care of patients twenty-four (24) hours a day, including air
transport facilities. The term hospital does not include health care and social services, nursing
and residential care facility, or establishments that forcibly confine patients,
An establishment that provides lodging to the public for a fee as defined by Idaho Code §67-
4711.
Chapter 1 Article A. DEFINITIONS
IMPACT AREA
IMPERVIOUS SURFACE
INDUSTRY,
INFORMATION
(NAISC CODE 51)
INDUSTRY, HEAVY
INDUSTRY, LIGHT
INFILL
JUNK
LANDSCAPE
MAINTENANCE
LAUNDROMAT
LAUNDRY AND DRY
CLEANING
LETTER OF CREDIT
LIGHT INDUSTRY
LIGHTING, DIRECT
LIGHTING, INDIRECT OR
INTERNAL
LIVING AREA
9
8/29/05
The area of future possible city incorporation as established by the Area of City Impact
Agreement with Ada County,
A surface that has been compacted or covered with a layer of material so that it is highly
resistant to infiltration or absorption by water. It includes surfaces such as compacted sand or
clay as well as most conventionally surfaced streets, roofs, sidewalks and parking lots,
The use of a site for processing data. The use includes, but is not limited to, publishing
industries such as newspapers, books, music, Internet and software; recording and
broadcasting studios; data processing centers, call centers, Internet providers and other
information systems,
1) A use engaged in the basic processing and manufacturing of materials or products,
predominately from extracted or raw materials; 2) A use engaged in storage or manufacturing
processes using flammable or explosive materials; 3) Storage or manufacturing processes
that potentially involve hazardous or commonly recognized offensive conditions,
A use engaged in the manufacture, processing, fabrication, assembly, treatment, and/or
packaging of finished products or parts, predominantly from previously prepared materials,
Any vacant lot or parcel within a developed area of the City, where at least eighty percent
(80%) of the land within a three hundred feet (300') radius of the site has been developed, and
where water, sewer, streets, schools and fire protection have already been developed and are
provided,
Discarded, used, or secondhand materials, including but not limited to, used machinery, scrap
copper, brass, iron, steel, other ferrous and non-ferrous metals, tools, appliances, implements,
vehicles or portions thereof, furniture, beds and bedding, rags, glass, plastic, cordage, rubber,
building materials (excluding lumber), or other waste that has been abandoned from its
original use and may be used again in its present or in a new form,
Watering, weeding, pruning, mowing, litter removal, pest control, and removal/repair of
vandalism as needed to maintain a neat and orderly appearance,
1) An establishment that provides washing, drying, and/or ironing machines for hire; 2) an
establishment that provides washing, drying and/or ironing services to walk-in retail
customers.
An establishment that washes large quantities of laundry or dry cleaning for commercial
patrons in machines larger than standard laundry machines.
A letter issued by a bank or other guaranteed financial institution authorizing the City of
Meridian to draw a stated amount of money from the issuing bank under specific, stated
conditions.
See industry, light,
Lighting, the source of which is visible to a viewer and/or which is reflected from the surface of
a sign or building, This definition shall include exposed neon lights and tubing,
Lighting for which the source of light is located in such a manner that the light must travel
through a translucent material other than the bulb or tube necessary to enclose the light
source, which material has the effect of dispersing the light before it strikes the eye of the
viewer.
The area of a residential dwelling as measured in square feet, excluding the garage.
Chapter 1 Article A. DEFINITIONS
LOT
LOT, COMMON
MANSARD ROOF
MANUFACTURED HOME
MANUFACTURED HOME
PARK
MATCHED
PRECIPITATION RATES
MEW
MICROPA TH
MITIGATION
MOBILE HOME
MONOPOLE
MORTUARY
MOTEL
MULCH
MULTIFAMILY
DEVELOPMENT
MULTIFAMILY DWELLING
NATURAL WATERWAYS
NEIGHBORING
PROPERTIES
NONCONFORMING
PROPERTY
NONCONFORMING SIGN
10
8/29/05
A portion of a subdivision intended as a unit for transfer of ownership and development.
A lot held in common ownership among all owners of the subdivision and separate from
individual building lots,
A sloped facade architecturally able to be treated as a building wall.
1) A dwelling constructed according to HUD/FHA construction and safety standards and as
defined by Idaho Code §3941 OS, 2) A rehabilitated dwelling certified by the State of Idaho
Department of Labor and Industry, Building Safety Division,
A multifamily residential development developed exclusively for siting manufactured homes on
individual spaces that are rented or leased.
Sprinklers that are designed to work together on the same irrigation valve to deliver an
equivalent rate of water application, regardless of the arc of the nozzle being used,
Dwelling units built around a common open space area or court where the units face the open
space area and are generally not accessed from a public street.
A pathway providing access by way of a short travel link between points of destination,
An action that will eliminate, minimize or compensate for impacts from development or uses,
A transportable structure suitable for year-round single-family occupancy and having water,
electrical, sewage connections similar to those of conventional dwellings. This definition
applies only to units constructed prior to June 15, 1976,
A cylindrical-shaped pole, usually made of steel, that has no visible break in shape or
appearance, other than tapering, which is secured to the ground in a manner to stand
vertically upright.
An establishment in which deceased human bodies are kept and prepared for burial or
cremation,
See hotel or motel,
A protective covering placed around plants to prevent the evaporation of moisture, the
freezing of roots, and the growth of weeds,
Development where there are three (3) or more dwelling units or apartments located on the
same property, A multifamily dwelling mayor may not be present on the property.
See dwelling, multifamily,
Natural waterways as defined by the United States Army Corp of Engineers, including but not
limited to, the Five Mile Creek, Eight Mile Creek, Ten Mile Creek, and Jackson Drain,
Abutting properties and any properties separated from the subject property solely by a
roadway or dedicated easement.
A property that lawfully existed prior to the effective date of this Title, but that does not now
conform to the dimensional standards for the district in which it is located,
See sign, nonconforming.
Chapter 1 Article A. DEFINITIONS
NONCONFORMING
STRUCTURE
NONCONFORMING USE
NURSERY OR URBAN
FARM
NURSING AND
RESIDENTIAL CARE
FACILITY
(NAICS CODE 623)
OPEN SPACE
OUTDOOR ACTIVITY
AREA
OWNER
PARCEL
PARCEL OF RECORD,
ORIGINAL
PARKING FACILITY
PARKING LOT OVERLAY
PARKING LOT
REPLACEMENT
PARKING LOT,
RESTRIPING
PARKING SPACE, OFF-
STREET
PARK
PARKWAY
11
8/29/05
A structure that was lawfully constructed and/or existing prior to the effective date of this Tille
but that does not conform to the dimensional standards for the district in which it is located,
A use that lawfully existed prior to the effective date of this Title but that does not now conform
to the allowed uses for the district in which it is located. For the purposes of this Title,
nonconforming parking lot design and landscaping shall be deemed a nonconforming use,
Any grounds, structures, greenhouses, or premises in which garden, landscaping, or florist's
stock is propagated, grown, stored, or packed for commercial sale, and where the general
public may purchase goods,
The use of a site for providing assistance to individuals needed to perform the routines of daily
life. The use includes, but is not limited to, children's treatment facility, assisted care, skilled
nursing facility, residential care facility, and drug and alcohol treatment facility.
An area substantially open to the sky that may be on the same property with a structure. The
area may include, along with the natural environmental features, parks, playgrounds, trees,
water areas, swimming pools, tennis courts, community centers or other recreational facilities,
The term shall not include streets, parking areas, or structures for habitation,
An area not fully enclosed that is associated with the use, including storage, equipment,
loading and docking, but excluding vehicle parking,
A person, as herein defined, having sufficient proprietary interest in the land to maintain
proceedings under this Title,
A tract of unplatted land or contiguous unplatted land held in single ownership, considered a
unit for purposes of development.
A parcel of land that was of record in the Ada County Recorder's office prior to April 2, 1984,
The use of a site for parking vehicles for a fee,
Any resurfacing of existing parking lot areas with asphalt or other permanent material.
Removal of the existing parking surface done for the purpose of improvement or repair.
Any change in the configuration, size or distribution of existing painted stripes designed to
create spaces for motorized vehicles.
An area adequate for parking an automobile with dimensions conforming to the requirements
of Chapter 3, Article C, OFF-STREET PARKING AND LOADING REQUIREMENTS of this Tille,
A public or private open space that is primarily used for active recreation,
A landscaped area located between the edge of a street section or curb and a sidewalk
dedicated to separate pedestrian and vehicular traffic.
Chapter 1 Article A. DEFINITIONS
PEDESTRIAN SCALE
PENNANT
PERMITTED USE
PERSON
PERSONAL AND
PROFESSIONAL
SERVICES
PLANNED UNIT
DEVELOPMENT (PUD)
PLAT, FINAL
PLAT, PRELIMINARY
PLAT, RECORDED
POWER PLANT
PRINCIPAL PERMITTED
USE
PROHIBITED USE
PROPERTY
PROPERTY BOUNDARY
ADJUSTMENT
12
8/29/05
The proportional relationship between buildings, outdoor spaces, or streetscapes and the
dimensions of the human body, Design on a pedestrian scale is dimensionally smaller than
design intended for vehicular traffic flow, Examples are lighting and other street features that
are no higher than twelve feet (12'); surfaces with small dimensions such as brick and pavers,
a variety of planting and landscaping; arcades or awnings that reduce the perception of wall
heights; buildings that reflect detail, texture and variety, and signs that are designed for the
pedestrian viewing from a short distance,
Any lightweight plastic, fabric, or other material, whether or not containing a message of any
kind, suspended from a rope, wire, or string, usually in series, designed to move in the wind,
The display of a single pennant, unattached to another, may be regarded as a type of
decorative flag.
See principal permitted use,
Includes, but is not limited to, an individual, associations, joint ventures, partnerships, estates,
trusts, business trusts, syndicates, fiduciaries, corporations, and all other or any other similar
entity.
The use of a site for the provision of individualized services generally related to personal
needs. Personal service uses include, but are not limited to beauty and health care services
such as salons, hair, nail and skin care, spa, and barbers; locksmiths; and repairs such as
footwear and leather goods, and watches. Professional service uses include, but are not
limited to: architects, landscape architects and other design services; computer designers;
consultants; lawyers; media advisors; photography studios, and title companies. The term
does not include health care and social service,
Property planned as a unit that demonstrates innovation and creativity in site design to protect
natural features, preserve open space and create public amenities,
A map or plan of an approved preliminary plat meeting all the requirements as set forth in
Chapter 6 SUBDIVISION REGULATIONS of this Title and in a form required for recording with the
Ada County Recorder.
A tentative map or plan of a proposed subdivision of land, cemetery, or replatting of land,
meeting all the requirements set forth in Chapter 6 SUBDIVISION REGULATIONS of this Title,
A final plat including certificates, descriptions, approvals and requirements as set forth in
Chapter 6 SUBDIVISION REGULATIONS of this Title and the Idaho Statutes, and recorded with the
Ada County Recorder,
1) An electricity-generating facility regulated by the Federal Energy Regulatory Commission
including, but not limited to, fossil fuel, geothermal, hydroelectric, biomass, and wind energy
conversion facilities; or 2) A Qualifying Facility as set forth in 18 CFR Part 131.80.
The use of land or a structure allowed in a specific district as distinguished from an accessory
or conditional use.
Any use that is not listed as an allowed use for that district in Tables 11-2A-2, 11-2B-1, 11-2C-
1, and 11-2D-1, or as determined by the Director in accord with Chapter 1 GENERAL
REGULATIONS of this Title,
A lot or parcel as herein defined,
The division for conveyance of a lot or parcel for the purpose of adjusting the boundary
between properties,
Chapter 1 Article A. DEFINITIONS
PROPERTY, CORNER
PROPERTY, FLAG
PROPERTY LINE, FRONT
PROPERTY LINE, REAR
PROPERTY LINE, SIDE
PROPERTY SIZE
PROPERTY, THROUGH
PUBLIC AMENITY
PUBLIC OR QUASI-
PUBLIC USE
PUBLIC RIGHT-OF-WAY
PUBLIC UTILITY
PUBLIC
INFRASTRUCTURE
PUBLIC UTILITY, MINOR
PUBLIC UTILITY, MAJOR
QUASI PUBLIC USE
REAR PROPERTY LINE
REAR YARD
RECREATION ITEM,
PERSONAL
RECREATIONAL VEHICLE
13
8/29/05
A property located at the intersection of two (2) or more streets,
A property in the shape of a flag on a pole where access to the street is from a narrow right-of-
way.
The line separating the lot or parcel from the street on which it takes access, excluding alleys,
The property line opposite and most distant from the front property line. Where the lot or
parcel is irregular and the property lines converge, the rear property line shall be deemed to
be a line at a point where the side property lines are not less than twenty (20) feet apart,
Any property line other than a front or rear property line, A property line adjoining a street is
called a street side property line, A property line adjoining another property is called an interior
side property line,
The computed horizontal area contained within a property,
A property other than a corner property having frontage on two (2) parallel or approximately
parallel streets, excluding alleys,
The term public use or amenity shall include, but not be limited to, the following: school site,
bike path, transit shelter, park site, and public safety facility such as police, fire, or emergency
medical facilities.
The use of a site for a public purpose or public facility, including municipal, state and federal
services, The use includes, but is not limited to, city hall; community centers; courts; emission
testing facility; fire station; law enforcement; library; park-and-ride lot; post office; and transit
stations.
A right-of-way open to the public and subject to the jurisdiction of a public highway agency.
Facilities owned and operated by a public utility as defined in Idaho Code §61-129.
The use of a site for a public infrastructure including, but not limited to: 1) power substation,
electric substation, grid switching site, electric transmission line; 2) water reservoir; and 3)
municipal wastewater and treatment facility.
The use of a site for minor public utility infrastructure including, but not limited to: 1) pumping
station for water, sewer, or gas; 2) electric sub-transmission line, electric distribution line; 3)
water tank; and 4) storm drainage facility and storm detention facility that is not within a right-
of-way,
The use of a site for a public purpose, including municipal and utility shops, garage, or
storage,
See public or quasi-public use.
See property line, rear,
See yard, rear,
The term personal recreation item shall include, but not be limited to, bus, boat, snowmobile,
horse trailer, and all terrain vehicles,
A portable structure primarily designed as temporary living accommodation for recreational,
camping, and travel use and as defined in Idaho Code §49-119,
Chapter 1 Article A. DEFINITIONS
RECREATIONAL VEHICLE
PARK
RECYCLING CENTER
RESIDENTIAL DISTRICT
REQUIRED YARD
RESTAURANT
RETAIL STORE
RIGHT-OF-WAY
SECTION LINE ROADS
SELF-SERVICE USES
SETBACK
SIDE PROPERTY LINE
SIDE YARD
SIGHT VISION TRIANGLE
SIGN
14
8/29/05
A premise upon that two (2) or more parking sites are located, established, or maintained for
occupancy by recreational vehicles for temporary use for recreation or vacation purposes,
An establishment that is not a junkyard and in which recoverable resource materials, such as
paper products, glassware, and metal cans, are collected, sorted, flattened, crushed, or
bundled within a completely enclosed structure prior to shipment to others who use such
resource materials to manufacture new products,
For the purposes of this Title, the term residential district shall include the Low Density
Residential District (R-2), Medium Low Density Residential District (R-4), Medium Density
Residential District (R-8), Medium High Density Residential District (R-15), High Density
Residential District (R-40), and Traditional Neighborhood Residential District (TN-R),
See yard, required,
1) The use of a site for the primary purpose of food preparation, having kitchen and cooking
facilities, and where meals are regularly served to the public for compensation. The use
includes, but is not limited to café, coffee shop, delicatessen, diner, eatery, grill, pizza parlor,
restaurant, retail bakery; sushi bar, steakhouse. 2) Establishments with a liquor license that
includes a restaurant certificate and that meet the definition of restaurant as set forth in Idaho
Administrative Code 11,05,01,04, 3) Establishments with a beer and wine license that meet
the definition of restaurant as set forth in Idaho Administrative Code 11,05,01.04, including but
not limited to brew pubs and wine bars,
The use of a site that offers merchandise to the public for monetary compensation, The use
includes, but is not limited to, convenience stores; food stores; apparel and accessories
stores; book, computer, and music stores; electronics and appliances; florists; furniture and
home furnishings; general merchandise stores; health and personal care stores; hobby, office
supplies, stationary and gift stores; specialty stores; sporting goods; and used merchandise
stores.
See public right-of-way,
The following roads are section line roads within the Meridian Area of City Impact: McDermott,
Black Cat, Ten Mile, Liner, Meridian, Locust Grove, Eagle, Chinden, McMillan, Ustick,
Fairview, Franklin, Overland, Victory, and Amity. The term shall include other roadways that
follow surveying section lines as additional areas are added to the Meridian Area of City
Impact.
Any commercial use in which there is not an attendant on the site during all hours of
operation, including but not limited to automated teller machines, laundromats, vehicle
washing, fuel sales facilities, and storage facilities.
The minimum required distance between the property line and the nearest structure, See
Figure 11-1A-1.
See property line, side.
See yard, side,
See clear vision triangle.
Any device, fixture, placard, or structure that uses any color, form, graphic, illumination,
symbol, or writing to advertise, announce the purpose of, or identify the purpose of a person or
entity, to communicate information of any kind to the public. See Figure 11-3D-1,
Chapter 1 Article A. DEFINITIONS
SIGN, ABANDONED
SIGN, ANIMATED
SIGN, ARCHITECTURAL
BLADE
SIGN, AWNING
SIGN, BACKGROUND
AREA
SIGN, BANNER
SIGN, BILLBOARD
SIGN, CENTER
SIGN, CHANGEABLE
PANEL
SIGN, CONSTRUCTION
SIGN, COpy
SIGN, COpy AREA
SIGN, DIRECTIONAL
SIGN, FREESTANDING
SIGN, HEIGHT OF
15
8/29/05
1) A sign that no longer serves to advertise a bona fide business, lessor, owner, or activity
conducted or product available on the premises, where such sign is located, 2) An inoperable
reader board.
A sign, any visible part of which blinks, flashes, moves or changes color to depict action or
create a special effect or scene, regardless of the source of energy causing the animation,
except signs performing only a public service function indicating time, temperature, stock
market quotations or similar services.
Roof sign or projecting sign with no legs or braces that is an integral part of the building
structure, rather than an object added to or standing on the building.
The copy area or separate background areas attached to an awning, To be computed as a
wall sign when awning is parallel to the wall.
The area comprising the portion of a sign on which copy could be placed, not including the
supporting structure, When computing the area of sign background, only the face or faces that
may be seen from one direction at one time shall be considered.
Any lightweight fabric or similar material, usually with a message attached, that is mounted to
a pole, building or other on-site structure. Flags, as herein described, shall not be considered
banner signs,
A non-point-of-sale sign that advertises a business, organization, event, person, place or thing
and that is typically located adjacent to a state or interstate highway right-of-way.
A freestanding sign allowed as part of the planned sign program, See Section 11-30-9 of this
Title.
See sign, readerboard.
Any temporary sign located upon a property or construction site with a valid and active
building permit and generally used for the purpose of identifying the participants, type, time,
and reason for construction,
Any combination of letters, numbers, or logos (identifying print) that is intended to inform,
direct, or otherwise transmit information.
The area of the sign occupied by copy. It is computed by measuring the area enclosed by
straight lines drawn to enclose the extremities of the copy,
A sign that foremost contains words such as .entrance," "enter," "exit," "in," "out," or
characters indicating traffic directions and used either in conjunction with such words or
separatelyo
A sign whose background or copy area is wholly supported by a column, pole, foundation,
pedestal or other support structure in or upon the ground and that is independent from any
structure or other structure,
The distance measured vertically from the adjacent street grade as measured from the top of
curb (or edge of pavement where no curb exists) to the highest point of the sign or visual
appurtenances. The height of any landscape berm or other structure erected to support or
ornament the sign shall be measured as part of the sign height. For residential subdivision
identification signs, sign height applies only to that portion of a structure which is physically
supporting the sign background area. Other architectural elements primarily related to the
entry feature are not regulated as part of the sign height.
Chapter 1 Article A. DEFINITIONS
SIGN, HANGING
SIGN, HOLIDAY OR
DECORATION
SIGN, IllUMINATED
SIGN,
NONCONFORMING
SIGN, OFF-PREMISES
SIGN, ORIENTATION
SIGN, PERMANENT
SIGN, POLE COVER
SIGN, PROJECTING
SIGN, PROJECTION
SIGN, PUBLIC SERVICE
INFORMATION
SIGN, READERBOARD
SIGN, REVOLVING OR
OSCilLATING
SIGN, ROOF
SIGN, SCROLLING
SIGN STRUCTURE
SIGN, SUBDIVISION
IDENTIFICATION
SIGN, TEMPORARY
SIGN, UNDER CANOPY
SIGN, WAll
16
8/29/05
See sign, under canopy,
Temporary signs in nature of decorations, clearly incidental to and customarily associated with
any national, local or religious holiday,
A sign that uses a source of light for illumination,
A sign, sign structure, or use of a sign lawfully existing prior to the effective date of this Title
but that does not now conform to the dimensional standards for the district in which it is
located,
A sign that is not related to the property upon which it is located or to the activity being
conducted thereon.
The placement of a sign in accord with its primary visibility from a particular location,
Any sign intended and constructed to be long term in nature,
Decorative structure or treatment that encloses the support structure of a freestanding sign,
A sign other than a wall sign, that projects from and is supported entirely by a wall of a
building or other structure.
The distance by which a sign extends over public property or beyond the building line,
A. sign that provides general public service information such as time, date, temperature,
weather, directional information and other non-commercial messages of interest to the
traveling public,
A sign on which copy is changed, Copy can be changed manually or automatically. Also
known as a sign, changeable panel. Automated readerboards may also be classified as
animated signs,
Any sign that incorporates movement of the structure or any portion thereof.
Any sign erected and constructed wholly on and over the roof of a building, supported by the
roof structure or extending vertically above the highest portion of the roof. A mansard roof is
treated as a wall.
Text or graphics usually as part of an electronic reader board that moves up or down or across
a display screen in a consistent and predictable manner.
Any structure that is specifically designed to support a sign, including decorative cover.
A permanent structure intended to identify a subdivision that incorporates design elements
and building materials consistent with the architecture and theme of the subdivision buildings
and features,
Any sign not permanently mounted or secured, displayed solely for short-term announcement,
message or advertisement and for infrequent and limited time periods. (See Section 11-30-6
TEMPORARY SIGNS OF this Title for specific types of temporary signs,)
A sign suspended below the overhang or roof of a canopy
Any sign that is attached, erected, or painted on the exterior wall of a building with the
exposed face of the sign parallel to the wall, Also known as a fascia sign.
Chapter 1 Article A. DEFINITIONS
SIGN, WINDOW
SINGLE-FAMILY
ATTACHED DWELLING
SINGLE-FAMILY
DETACHED DWELLING
SITE PLAN
SOIL STABILIZATION
SOLID WASTE
TRANSFER STATION
STATE
STORAGE FACILITIES,
OUTDOOR
STORAGE FACILITY,
SELF-SERVICE
STORY
STREET
STREET, ARTERIAL
STREET, COLLECTOR
STREET, CUL-DE-SAC
STREET,ENTRYWAY
CORRIDOR
STREET FRONTAGE
STREET ISLAND
STREET KNUCKLE
17
8/29/05
Any sign, picture, symbol, or combination thereof, designed to communicate information about
an activity, business, commodity, event, sale, or service, that is placed inside a window or
upon the windowpanes or glass and is visible from the exterior of the window,
See dwelling, single-family attached,
See dwelling, single-family detached,
A plan, to scale, showing existing and proposed uses, structures and improvements proposed
for a property as required by the regulations involved, Such plans Include property lines,
streets, driveways, parking, building sites, landscaping, open space, and utility easements,
The state of having sufficient vegetation and gradual slopes to prevent soil erosion and
sedimentation onto adjacent features such as sidewalks, driveways, parking areas, lawns, or
water bodies,
The use of a site for the collection and temporary storage of solid waste for subsequent
transport to a permanent disposal location,
The State of Idaho,
The use of a site where equipment, inventory, supplies, or other similar items are stored,
including a building with a roof but without walls completely enclosing the building,
A structure or group of structures with a controlled access and fenced compound that contains
individual, compartmentalized, or controlled units that are leased or sold to store material
(including, but not limited to, goods, wares, merchandise, or vehicles.)
The term story shall be as defined by Meridian City Building Code as set forth in Title 10,
Chapter 1, of the Meridian City Municipal Code.
A private or public right-of-way that provides vehicular access to adjacent properties, The term
street shall include, but not be limited to, a road, thoroughfare, parkway, avenue, boulevard,
lane, place, or highway.
A street designated as a major or minor arterial on the most recent Regional Transportation
Plan for Ada County by the Community Planning Association of Southwest Idaho or the City of
Meridian Comprehensive Plan that carries high-volume through traffic on a continuous route,
A street designated as a major or minor collector on the most recent Regional Transportation
Plan for Ada County adopted by the Community Planning Association of Southwest Idaho or
the City of Meridian Comprehensive Plan that carries traffic from local streets to arterials,
A dead-end street provided with a turnaround at its terminus,
Arterial roadways that introduce both visitors and residents to the City of Meridian, as defined
by the City's Comprehensive Plan,
The distance measured along the property line, which fronts upon a street or alley or other
principal thoroughfare that provides vehicular access to a property,
A landscape island located within or surrounded by public street right-of-way.
An expansion of a local street providing access to abutting properties,
Chapter 1 Article A. DEFINITIONS
STREET,LOCAl
STREET, PUBLIC
STREET, PRIVATE
STROBE LIGHT
STRUCTURE
SUBDIVISION
SUPER GRAPHICS
SURETY
SWAlE
SWAlE, STORMWA TER
TEMPORARY USE
TERMINAL, FREIGHT OR
TRUCK
THROUGH PROPERTY
TOWER, LATTICE
TOWER, MONOPOLE
TOWNHOUSE DWELLING
TRANSPORTATION
AUTHORITY
18
8/29/05
A street used primarily for access to abutting properties,
A street that is subject to the jurisdiction of the Idaho Department of Transportation (ITO) or
the Transportation Authority (ACHD),
A roadway that is not dedicated to the public that is not a part of the public highway system,
and that is approved pursuant to Chapter 3, Article F, PRIVATE STREET REQUIREMENTS of this
Title.
An attention-getting device that emits a repetitive light; independent of, or as part of a sign,
For the purposes of this Code, a strobe light shall not be considered an animated sign.
See building,
1) The division of a lot or parcel of land, into two or more lots for the purpose of conveyance of
ownership or for building development; and the recorded plat thereof; or 2) The platting of one
lot or parcel for the purposes of remedying a prior illegal division of property or as deemed
appropriate by the Director and/or City Engineer.
Any abstract mosaic, mural, painting, graphic art technique or any combination thereof that
does not contain any copy, business logo or other visual elements intended to advertise.
Cash, or cash equivalent, including an irrevocable letter of credit or a certificate of deposit,
guaranteeing the performance of the terms and conditions of a development approval.
A shallow, grassy depression.
A broad, shallow channel covered with erosion-resistant vegetation and used to conduct,
infiltrate, and pretreated surface runoff,
The use of a site on a seasonal basis and for a short period of time, The use includes, but is
not limited to, Christmas tree lots, construction buildings, firework stands, food service
vehicles, model homes, produce stands, snow cone stands, and pumpkin stands.
The use of a site where freight brought by truck or rail is transferred, The use may include the
storage or repair of trucks or rail cars, The use excludes the long-term or permanent storage
of freight.
See property, through,
A tower made of an open metal framework consisting of strips of metal overlapped in a pattern
to achieve strength and height.
A cylindrical-shaped pole usually made of steel that has no visible break in shape or
appearance, other than tapering, which is secured to the ground in a manner to stand
vertically upright.
See dwelling, townhouse.
The Ada County Highway District, the Idaho Transportation Department, the Valley Regional
Transit and any other agency that may succeed to their powers or establish public jurisdiction
in the field of transportation, The term transportation authority shall be liberally construed to
include all the adopted, approved, or certified plans, rules, regulations, statutes, or laws of the
transportation authority.
Chapter 1 Article A. DEFINITIONS
TREES,
CLASS I, II, III
TRUCK TERMINAL
UNPLATTED
UP-LIGHTING
URBAN SERVICE
PLANNING AREA
USE
USE, CHANGE OF
UTILITY
VARIANCE
VEHICLE
VEHICLE, COMMERCIAL
VEHICLE IMPOUND YARD
VEHICLE, INOPERABLE
VEHICLE REPAIR, MAJOR
VEHICLE REPAIR, MINOR
VEHICLE SALES OR
RENTAL AND SERVICE
19
8/29/05
The classes of trees are defined for the purposes of this Title by the publication Tree Selection
Guide for Streets and Landscapes Throughout Idaho by the Urban Forestry Unit of the Boise
Parks and Recreation Department (latest edition). In general, Class I trees are smaller
ornamental trees, Class II trees are mediumllarge trees appropriate for street tree planting,
and Class III trees are very large trees.
See terminal, freight or truck,
A parcel that is not included in any subdivision of record in Ada County,
Lighting that is directed in such a manner as to shine light rays onto a building surface.
The land area within an area of city impact where urban services are available or planned, as
provided and described in the Comprehensive Plan and designated on the adopted area of
city impact boundary map,
The term use shall include the specific purposes for which an area or structure is arranged,
designed, constructed, altered, converted, rented, leased, or intended to be maintained andlor
occupied.
A change of use shall include, but not be limited to, an expansion, alteration, or change in
occupancy resulting in a more intense use of a site, such as additional dwelling units, gross
floor area, seating capacity,
Electrical, natural gas water, wastewater, telephone and cable services and facilities,
A relief from development standards as allowed by Chapter 5, ADMINiSTRATION of this Title and
as enabled by Idaho Code §67-6516,
The term vehicle shall include, but not limited to, automobile, truck, motorcycle, recreational
vehicle, personal recreation item or as otherwise defined in Idaho Code §49-123 which
includes every device in, upon, or by which any person or property is or may be transported or
drawn (e,g" travel trailers) upon a public highway, excepting devices moved by human power
or used exclusively upon stationary rails or tracks.
Any currently licensed and operable motor vehicle with a gross vehicle weight rating over
26,000 pounds and as defined by Idaho Code §49-123,
The use of a site for the temporary storage of vehicles to be claimed by the owners,
A vehicle that cannot move under its own power or does not meet the minimum legal
requirements necessary for the motor vehicle to be operated in a safe and lawful manner upon
the roadways and highways in the State of Idaho, as set forth in Idaho Code §49,
The use of a site for major vehicle rebuilding or reconditioning, The use includes en9ine
rebuilding; major reconditioning of worn or damaged motor vehicles; and collision service,
including body, frame, or fender straightening or repair,
The use of a site for minor vehicle maintenance and repair. The use includes vehicle repair
garages, muffler shops, tire sales and installations, transmission shops, and wheel and brake
shops
The sale, trade, or lease of new or used vehicles in operating condition and any repair work or
minor service. Repair work or minor service shall include, but not be limited to, replacement of
parts (e,g" tires, shocks, brakes, mufflers, windshields, radiators, upholstery), oil change,
minor engine repair, tune-up, and accessory sales of replacement parts, Any operation
specified under vehicle, major repair is excluded.
Chapter 1 Article A. DEFINITIONS
VEHICLE WASHING
FACILITY
VEHICLE WRECKING OR
JUNKYARD
VERTICALLY
INTEGRATED
RESIDENTIAL PROJECT
VETERINARY OFFICE
VISION TRIANGLE
WALKWAY
WALL AREA
WAREHOUSE AND
STORAGE
(NAICS CODE 493)
WATER AMENITY
WHOLESALE SALES
WIRELESS
COMMUNICATION
FACILITY
XERISCAPE
YARD, STREET
YARD, REAR
YARD, REQUIRED
20
8/29/05
The use of a site where a vehicle may be washed, waxed, detailed, or vacuumed by the owner
of the vehicle or employees on the site.
Any area, lot, land, or parcel where two or more vehicles without current registration or two or
more inoperable or dismantled vehicles that are not in operating condition (or parts thereof)
are stored, dumped, dismantled, partially dismantled or wrecked; or as defined by Idaho Code
§40-111, the use of a site that is maintained, operated, or used for storing, keeping, buying, or
selling junk, or for the maintenance or operation of an automobile graveyard, garbage dumps
and sanitary fills, The following uses are excluded from this definition: agricultural equipment
on a farm as herein defined and vehicles stored or dismantled within a completely enclosed
structure,
The use of a multi story structure for residential and nonresidential uses where the different
uses are planned as a unified, complementary whole and functionally integrated to share
vehicular and pedestrian access and parking.
See animal care facility,
See clear vision triangle,
A public way for non-vehicular use only, whether or not along the side of a road.
Wall area is defined as the total square footage of an exterior wall and determined by
multiplying the total lineal elevation of the building (or the leased portion thereofj by the
distance from the roof line to pedestrian grade,
A structure used primarily for storing materials and/or freight, including, but not limited to,
goods, wares, merchandise, or vehicles.
Any body of water either natural or manmade, which either exists or is proposed to be
improved as a part of the development, in which its banks in all places adjacent to and located
on said development are no steeper than one foot (1 ') vertical per every four feet (4')
horizontally (4:1) and which has a depth and velocity in all places adjacent to and located on
said development such that the product of the maximum depth (feet) multiplied by the peak
velocity (feet per second) does not exceed four (4),
The use of a site for selling, distributing, or brokering merchandise to retailers, business users,
or other wholesalers, This use can include incidental retail sales to the general public,
A steel monopole, guy wire tower, lattice tower or other similar structure designed to support
directional antennae, parabolic dishes or antennae, microwave dishes, in addition to
associated ground equipment and other similar equipment used in the wireless
communications industry,
Landscaping that is characterized by the use of vegetation that is drought tolerant or of low
water use in character,
An area extending across the full width of the property and lying between the front property
line and the nearest line of a principal structure, See Figure 11-1 A-1,
An area extending across the full width of the property and lying between the rear property line
and the nearest line of the principal structure. See Figure 11-1A-1.
An area that extends along a property line to a depth or width specified in the setback
regulations for the district in which the property is located, See Figure 11-1 A-1,
Chapter 1 Article A. DEFINITIONS
YARD, SIDE
11-1A-2:
21
8/29/05
An area extending from the front yard to the rear yard between the side property line and the
nearest line of the principal structure, See Figure 11-1 A-1,
FIGURE 11-1A-1 AND FIGURE 11-1A-2: See following pages,
Chapter 1 Article A. DEFINITIONS
8/29/05
FIGURE 11-1A-1: SETBACKS, REQUIRED YARDS AND PROPERTY TYPES
.:._._._.1D._.~7._._._._._._._._._.r._._._._._._._._./T-.-.-.-.-.-.-.-.-
:~ " 1 /.
: 1 " , /:': I
@ @.., 1 /:/: .
I . ., , 1
'iR\' I' /..' : .
I~ .~ Le"" : 1
@'@.".I.(:[1' : ~.--~-,-"""'"-"--~.-
-------------! iff"', . ~..~.. i@-----lReqUiredSideYardtu-n
" 1 . ... : --
! .,' ..~., j - Required Front Yard
I . ./.. :
'I '.....: - Required Rear Yard
@ - @.. :
, iD\ ¡"..", 8:: ~- --
-' If'.) L '..n_n..--.n_@u: ---1 Required Side Yard 1-----
.---.---.---. '-œr.-.-'-.-.-- -_._-_.-._._~ .-.-.-.-.-.-
m 1 LEGEND
I~U9h property I @ i @ Front setback
I ' @ Side setback
! (ÇI Side street setback
-_._._._----.--r'~--._._._-_._- ',1 ! @ Rearsetback
~' .--.---- _u_iD\_n_~ '------_un- iR\ ~. ~m: - . -@---:::-:::--!'-:-':~"-~~--~::~".~:--
Ip) : 1 : 'eJ ~ : 1--,--= L-
(þ :@'@ (þ" :iR\'@: :@
: I: -< @ : :~ 1 : ! Building Envelope I :
, : ': ,...i: :':'" ",-,-,', :
'u uuuumuu,: !'ummuu~ . - :u UUUUm' I :Cuu-muumC.--mmm:
@ ~-------, @V(Ç).I
. Setbacks on corner property I (Ç)
.-.-.
@
( ! ! ! !
I I I
1
Chapter 1 Article A. DEFINITIONS
FIGURE 11-1A-2: TYPES OF DWELLING UNITS
-------
! i
iGi
!~i
! i
'--------'
;------.----l
I .
i~!
, I
1 DO DO i
¡DO,
. I
I .
._-------_.J
;---.-T----¡
I ' i
I'~'
. I
i DO DO i
¡DO,
, I I
I .
--.----L-----J
:-- - - - -- - - - --- - - - --I
I '
. 1
I '
. I
1 '
. I
I '
, I
L______-----_._----.J
Single family detached
or manufactured home
(j 1 structure
LJ 1 property
~ 1 dwelling unit
Duplex
Cj 1 structure
L J 1 property
~ 2 dwelling units
Single family attached
(j 1 structure
LJ 2 properties
~ 2 dwelling units
Townhouse
(j 1 structure
L J 3 properties
~ 3 or more dwelling units
Multifamily
(j 1 structure
LJ 1 property
~ 3 or more dwelling units
Chapter 1 Article A. DEFINITIONS
8/29/05
8/29/05
CHAPTER 1
GENERAL REGULATIONS
ARTICLE B. NONCONFORMING PROPERTY, USE OR STRUCTURE
ARTICLE B.
11-18-1:
11-18-2:
11-18-3:
11-18-4:
11-18-5:
11-18-6:
SECTIONS:
PURPOSE
APPLICABILITY
NONCONFORMING PROPERTY
NONCONFORMING USE
NONCONFORMING STRUCTURE
VIOLATIONS
11-18-1: PURPOSE: The purpose of this Article is to allow any nonconforming
property, use, or structure that lawfully existed prior to the effective date
(September 15, 2005) of this Title to continue until they are removed, but not to
encourage their continuation, It is further the intent of this Article that
nonconforming uses or structures shall not expand or extend the nonconforming
aspect of the property, use, or structure, unless approved subject to a conditional
use permit as set forth in the regulations of Chapter 5 ARTICLE 8. SPECIFIC
PROVISIONS of this Title.
11-18-2: APPLICABILITY: These regulations shall apply to any lawfully
existing nonconforming property, use, or structure in any district, except: In the
event that a property, use, or structure that was deemed nonconforming under past
regulations now complies with the standards of this title, such property, use, or
structure shall be deemed conforming,
11-18-3:
NONCONFORMING PROPERTY:
A.
The nonconforming property shall not be diminished in size.
8,
Any property reduced by governmental action that reduces an existing
conforming parcel below the required property size shall be deemed as a
conforming property for the purpose of development. To be deemed a
conforming property, the owner or applicant shall submit documents to the
Director proving the following:
1, The property was in compliance with the minimum property size requirement
of the applicable district prior to the decrease in property size; and
2. The decrease in property size was caused by acquisition through
prescription, purchase, or other means by the Transportation Authority, a
utility company or corporation under the jurisdiction of the Idaho Public
Utilities Commission, or other local, State, or Federal agency.
Chapter 1 Article 8. NONCONFORMING PROPERTY, USE OR STRUCTURE
8/29/05
11-18-4:
NONCONFORMING USE:
A.
The nonconforming use may continue as long as the use remains lawful and
is not expanded or extended, subject to the following provisions:
1, Alteration: No existing structure containing a nonconforming use may be
enlarged, extended, constructed, reconstructed, moved or structurally
altered except; (a) through the approval of a conditional use permit in accord
with the procedures set forth in Chapter 5 Article B SPECIFIC PROVISIONS of
this Title; or (b) where the use of the structure is changed to a conforming
use, .
2, Extension: A nonconforming use may be extended to occupy additional land
area only through the approval of a conditional use permit in accord with the
procedures set forth in Chapter 5 Article B, SPECIFIC PROVISIONS of this Title.
8,
If a nonconforming use has ceased for twelve (12) consecutive months or
has been replaced with a conforming use, the nonconforming use shall be
deemed abandoned and shall not be reestablished.
C.
A nonconforming use or structure housing a nonconforming use that is
damaged more than fifty percent (50%) of its current assessed taxable value
by fire, flood, explosion, wind, earthquake, war, riot, calamity, or other
catastrophic event, shall comply with this Title upon reconstruction, If the
damage to the nonconforming use or structure housing the nonconforming
use is fifty percent (50%) or less of its current assessed taxable value, the
nonconforming use may continue, provided that the nonconforming use
commences within twelve (12) months of the event.
0,
Uses housed within structures listed on the National Register of Historic
Places shall be exempt from the regulations of this Section,
11-18-5:
NONCONFORMING STRUCTURE:
A.
Nonconforming structures may be enlarged, repaired or modified, provided
that the additions or modifications to the structure conform to the
requirements of this Title,
B.
A nonconforming structure that is damaged more than seventy-five percent
(75%) of its current assessed taxable value by fire, flood, explosion, wind,
earthquake, war, riot, calamity, or other catastrophic event, shall comply with
this Title upon restoration or reconstruction. If the damage to the
nonconforming structures is seventy-five percent (75%) or less of its current
assessed taxable value, the structure may be restored or reconstructed,
provided that restoration or reconstruction commences within twelve (12)
months of the event.
C.
Structures listed on the National Register of Historic Places shall be exempt
from the regulations of this Section.
2
Chapter 1 Article B. NONCONFORMING PROPERTY, USE OR STRUCTURE
8/29/05
11-18-6: VIOLATIONS: Properties, uses, or structures that were in violation of
previous land use regulations and that remain a violation under this Title shall be
considered continuing violations.
3
Chapter 1 Article 8, NONCONFORMING PROPERTY, USE OR STRUCTURE
8/29/05
CHAPTER 2
DISTRICT REGULATIONS
SECTIONS:
11-2-1: ZONING DISTRICTS ESTABLISHED
11-2-2: OFFICIAL ZONING MAP
11-2-1: ZONING DISTRICTS ESTABLISHED: For the purpose of this Title,
the incorporated territory of the City of Meridian, Idaho, is divided into the following
districts:
DISTRICTS
Map Symbol
RESIDENTIAL
Low-Density Residential District
Medium low-Density Residential District
Medium-Density Residential District
Medium High-Density Residential District
High-Density Residential District
R-2
R-4
R-8
R-15
R-40
COMMERCIAL
Neighborhood Business District
Community Business District
General Retail and Service Commercial District
Limited Office District
C-N
C-C
C-G
L-O
INDUSTRIAL
Light Industrial District
Heavy Industrial District
TRADITIONAL NEIGHBORHOOD
Old Town
Traditional Neighborhood Center
Traditional Neighborhood Residential
I-L
I-H
O-T
TN-C
TN-R
11-2-2: OFFICIAL ZONING MAP: The boundaries of the districts are shown
on the Official Zoning Map of the City of Meridian. The Official Zoning Map is made
a part of this Title, as well as such other map or maps that are duly adopted. Said
Official Zoning Maps properly attested, shall be placed and remain on file in the
office of the Meridian City Clerk.
Chapter 2 DISTRICT REGULATIONS
8/29/05
CHAPTER 2
DISTRICT REGULATIONS
ARTICLE A. RESIDENTIAL DIST,RICTS
ARTICLE A. SECTIONS:
11- 2A-1 : PURPOSE
11- 2A-2: ALLOWED USES
11- 2A-3: STANDARDS
11- 2A-1: PURPOSE: The purpose of the residential districts is to provide for a
range of housing opportunities consistent with the Meridian Comprehensive Plan,
Connection to the City of Meridian water and sewer systems is a requirement for all
residential districts. Residential districts are distinguished by the allowable density
of dwelling units per acre and corresponding housing types that can be
accommodated within the density range. Residential land uses are also allowed
within the O-T, TN-C, and TN-R districts as set forth in Chapter 3 Article D,
TABLE 11-2A-1: MAXIMUM GROSS DENSITY IN THE RESIDENTIAL DISTRICTS
11- 2A-2: ALLOWED USES: Table 11-2A-2 lists principal permitted (P),
accessory (A), and conditional (C), or prohibited (--). uses,
A.
Permitted uses and accessory uses shall be reviewed in accord with
Chapter 4 specific use standards of this Title,
B.
Conditional uses shall be approved in accord with the procedures and
regulations for conditional uses set forth in Chapter 5 administration and the
specific use standards in Chapter 4 specific use standards of this Title.
C,
Any use not explicitly listed in Table 11-2A-2 is prohibited in all residential
districts.
D,
Uses that are listed as PIC or AlC may be subject to a conditional use
permit depending on if the use is in accord with the specific use standards
as set forth in Chapter 4 specific use standards.
E.
Interpretation of the inclusion or exclusion of allowed uses shall be made by
the Director and based on the Director's findings in review of the criteria
established in Chapter 1 general regulations of this Title,
1
Chapter 2 Article A. RESIDENTIAL DISTRICTS
8/29/05
TABLE 11-2A-2: ALLOWED USES IN THE RESIDENTIAL DISTRICTS
illE!;t,;:<i"'" ,,"~r: :""'~IAL T,T
~"ii:ii.:,i!J: ".~' ," R-2¡,' ;:"~ R.15 R.40;ii
Arts, entertainment or recreation facility, outdoors* u u C C C
Cemetery* -- C C C C
Church or place of reliaious worshiD* -- -- C C C
Civic, social or fraternal oraanizations* -- -- C C C
Day care center* -- C C P P
Day care, family* u A A A C
Day care, Qroup* .. C P P
DwellinQ, secondary* A A A A A
Dwelling, sinClle.family attached -- C P P P
DwellinCl, single family detached P p P P AlC
DwellinCl, townhouse -- C P P C
Dwelling, two-family duDlex -- C P P C
Education Institution, Private* C C C C
Education Institution, Public* C C PIC PIC
Home, manufactured or mobile subdivision u -- e C e
Home occupation* A A A A A
Laundromat* -- -- -- A Ale
Manufactured Home Park -- -- -- e --
Multifamily develoDment* 1 -- -. -- e e
Nursing or residential care facility* --.. C e e
Parking Facility -- -- -- -- C
Parks, public and Drivate p P P P P
Personal or professional service -- -- -- -- A
Public or Quasi-public use* -- -- e C e
Public, infrastructure C C e C e
Public utility, minor P p P P P
Recreation vehicle park -- .. -- u e
Restaurant -- .. -- -- A
Storage facility, outside* A A A A A
Storage facility, self-service* A A A A A
Temporary use A A A A A
Vertical intearated residential proiect* u -- .. e C
Wireless communication facility, amateur radio antenna A AA A A
~-a ~dY~" - e,~,: $P1an~~*'i'
11-2A-3: STANDARDS: The standards for development in all residential
districts shall be as follows:
A.
Minimum property size:
1, Each property shall be of sufficient size to meet the minimum setbacks as
established in this section and dwelling unit size requirements in accord with
Sections 11-2A-3.F of this Title.
2
Chapter 2 Article A. RESIDENTIAL DISTRICTS
8/29105
2, Minimum property size shall be determined exclusive of land that is used for
the conveyance of irrigation water, drainage, creek or river flows unless: 1)
the water is conveyed through pipe or tile; and 2) included as part of a utility
easement that generally runs along the property lines,
3, When two (2) or more parcels of land, each of which is of inadequate area
and dimension to qualify for a permitted use under the requirements of the
district in which the parcels are located, are held in one ownership, they
shall be used as one property for such use,
8,
Minimum street frontage:
1, Properties with street frontages on cul-de-sacs or at approximately a 90.
angle shall be a minimum of thirty feet (30') measured as a chord
measurement.
2. Street knuckles shall be separated from through traffic by a landscape
island. Properties with frontages on such knuckles shall be a minimum of
thirty feet (30') measured as a chord measurement.
3. Street frontage for two (2) properties sharing a common drive shall be a
minimum of fifteen feet (15') for each property.
4, Street frontage for three (3) or four (4) properties sharing a common drive
shall be a minimum of ten feet (10') for each property.
5, Street frontage for flag properties that do not share a common drive shall be
a minimum of thirty feet (30').
C,
Corner lot setbacks: Corner properties shall have one (1) interior side
setback and one (1) rear setback.
D.
Encroachments allowed in any setback:
1, Open structures such as porches, canopies, balconies, platforms, covered
patios, cornices, eaves or other projections, which do not increase the
volume of space enclosed by the building and do not project into any
required setback by more than two feet (2'),
2, Chimneys, pop-out windows, direct vent gas fireplaces, entertainment
centers, window seats and other projections which do not increase the
usable floor area and do not exceed eight feet (8') in width may project up to
two feet (2') into any required setback,
3. One detached accessory building that is less than two hundred (200) square
feet in area and eight feet (8') or less in height shall be allowed in the
required rear yard,
3
Chapter 2 Article A. RESIDENTIAL DISTRICTS
8/29/05
E.
Maximum height limit:
1. The maximum height limitations shall not apply to the following architectural
features not intended for human occupation: spire or steeple, belfry, cupola,
chimney. Such architectural features shall have a maximum height limit of
twenty feet (20') as measured from the roof line.
2. The maximum height limitations shall not apply to the following: amateur
radio antenna; bridge tower; fire and hose tower; observation tower; power
line tower; smokestack; water tank or tower; ventilator; windmill; wireless
communication facility, or other commercial or personal tower and/or
antenna structure; or other appurtenances usually required to be placed
above the level of the ground and not intended for human occupancy.
3. Notwithstanding other height limitations as set forth in this Chapter, the
maximum height for EDUCATION FACILITIES SHALL BE 40'.
4, No exception shall be allowed to the height limit where the height of any
structures will constitute a hazard to the safe landing and take-off of aircraft
in an established airport.
F.
Living Space: Excluding the garage, all detached residential dwelling units in
the R-2 and R-4 Districts shall meet minimum living space size requirements
in accord with Sections 11-2A-4 and 11-2A-5,
G.
Roof Design: All residential dwelling structures shall have a pitched roof not
less than three feet (3') in height for each twelve feet (12') in length,
H,
Drainage:
1, In no case shall a development propose less than a five-foot (5') setback
adjacent to a property that is not part of the development application.
2. Properties shall provide adequate area to maintain drainage on the site.
11-2A-4: LOW-DENSITY RESIDENTIAL DISTRICT (R-2): Dimensional
Standards for development in the R-2 Residential District shall be as follows:
4
Chapter 2 Article A. RESIDENTIAL DISTRICTS
8/29/05
TABLE 11-2A-3: DIMENSIONAL STANDARDS FOR THE R-2 DISTRICT
'" ,,\"
Street landscape buffer (in feet)
Local
Collector
Collector
Arterial
Entryway corridor
Interstate
REQUIREMENT
12,000
80
15
7.5/stor
20
25
20
25
35
50
35
1,500
800
11-2A-5: MEDIUM LOW-DENSITY RESIDENTIAL DISTRICT (R-4):
Dimensional Standards for development in the R-4 Residential District shall be as
follows:
TABLE 11-2A-4: DIMENSIONAL STANDARDS FOR THE R-4 DISTRICT
Street setback.. to living area (in feet)
Local
Collector
Local
Collector
Collector
Arterial
Entryway corridor
Interstate
Street landscape buffer (in feet)
5
REQUIREMeNT
8,000
60
15
5
20
25
15
25
20
25
35
50
35
1,400
800
800
Chapter 2 Article A. RESIDENTIAL DISTRICTS
8/29/05
11-2A-6: MEDIUM-DENSITY RESIDENTIAL DISTRICT (R-8): Dimensional
Standards for development in the R-8 Residential District shall be as follows:
TABLE 11-2A-5: DIMENSIONAL STANDARDS FOR THE R-B DISTRICT
REQUiReMENT
5,000
4,000
4,000
5,000
50
40
40
20
25
15
25
4
12
20
25
35
50
35
Street setback*** to living area (in feet)
Side setback
Rear setback
Street landscape buffer (in feet)
Collector
Arterial
Entryway corridor
Interstate
6
Chapter 2 Article A, RESIDENTIAL DISTRICTS
8/29/05
11-2A-7: MEDIUM HIGH~DENSITY RESIDENTIAL DISTRICT (R~15):
Dimensional Standards for development in the R-15 Residential District shall be as
follows:
TABLE 11-2A-6: DIMENSIONAL STANDARDS FOR THE R-15 DISTRICT
Street setback" to living area (in feet)
Local
Collector
Local
Collector
Side setback
Rear setback
Street landscape buffer (in feet)
Collector
Arterial
Entryway corridor
Interstate
REQUIRE
2,400
0
20
25
10
20
4
12
20
25
35
50
40
T.
11-2A-8: HIGH-DENSITY RESIDENTIAL DISTRICT (R-40): Dimensional
Standards for development in the R-40 Residential District shall be as follows:
TABLE 11-2A-7: DIMENSIONAL STANDARDS FOR THE R-40 DISTRICT
Local
Collector
Local
Collector
Collector
Arterial
Entryway corridor
Interstate
Street setback" to living area (in feet)
Street landscape buffer (in feet)
7
. REQUIRE~rJJi..
1,200
0
15
51stor
20
25
10
20
20
25
35
50
60
Chapter 2 Article A. RESIDENTIAL DISTRICTS
8/29/05
CHAPTER 2
DISTRICT REGULATIONS
ARTICLE B. COMMERCIAL DISTRICTS
ARTICLE B. SECTIONS:
11-28-1: PURPOSE
11-28-2: ALLOWED USES
11-28-3: STANDARDS
11-28-1: PURPOSE: The purpose of the Commercial Districts is to provide for
the retail and service needs of the community in accord with the Meridian
Comprehensive Plan, Four Districts are designated which differ in the size and
scale of commercial structures accommodated in the district, the scale and mix of
allowed commercial uses, and the location of the district in proximity to streets and
highways:
TABLE 11-2B-1: PURPOSE AND ALLOWED USE BY COMMERCIAL DISTRICT
. r,(!;T.:;;,rr
NEIGHBORHOOD BUSINESS
DISTRICT C-N
COMMUNITY BUSINESS
DISTRICT (C-C)
LARGER SCALE AND BROADER
MIX OF RETAil, OFFICE, AND
SERVICE USES
LARGEST SCALE AND
BROADEST MIX OF RETAIL,
OFFICE, SERVICE, AND LIGHT
INDUSTRIAL USES
OFFICE CENTERS AND
ADAPTIVE REUSE OF
RESIDENTIAL STRUCTURES
.r. LOCA110N
ACCESS TO ARTERIAL OR
COLLECTOR
ACCESS TO ARTERIALS OR
NONRESIDENTIAL COLLECTORS
GENERAL RETAIL AND SERVICE
COMMERCIAL DISTRICT (C-G)
CLOSE PROXIMITY AND/OR
ACCESS TO INTERSTATE OR
ARTERIAL INTERSECTIONS
LIMITED OFFICE DISTRICT (L-O)
ACCESS TO ARTERIAL OR
COLLECTOR
11-28-2: ALLOWED USES: Table 11-28-2 lists principal permitted (P),
accessory (A), and conditional (C) or prohibited (--) uses within each commercial
district.
A.
Permitted uses and accessory uses shall be reviewed in accord with
Chapter 4 specific use standards of this Title.
8.
Conditional uses shall be approved in accord with the procedures and
regulations for conditional uses set forth in Chapter 5 administration and the
specific use standards in Chapter 4 specific use standards of this Title.
C.
Any use not explicitly listed in Table 11-28-2 is prohibited in all commercial
districts.
Chapter 2 Article B. COMMERICAl DISTRICTS
8/29/05
D,
Uses that are listed as PIC or AlC may be subject to a conditional use
permit depending on if the use is in accord with the specific use standards
as set forth in Chapter 4 specific use standards.
E.
Interpretation of the inclusion or exclusion of allowed uses shall be made by
the Director and based on the Director's findings in review of the criteria
established in Chapter 1 general regulations of this Title.
F,
For uses that may fall into more than one category, the Director shall
determine the most appropriate category based on the more restrictive
standards.
TABLE 11-2B-2: ALLOWED USES IN THE COMMERCIAL DISTRICTS
:'",;.\",jiDikt:N,\i:,", WE"iiL" ,fiE! ",':' I"~ ,Q.iN':þj:, ¡'~i::j" 1" CoO L~O
" ,J" " ,ii:"":,:,' "
Animal care facility' P P P e
Artist studio' P P P --
Arts, entertainment or recreation facility, indoors' p P P e
Arts, entertainment or recreation facility, outdoors' C P P --
Arts, entertainment or recreation facility, outdoor -- e e -
stage or music venue
BuildinQ material, garden equipment and supplies' e p P --
Cemetery' -- -- -- e
Church or place of religious worship' p P P P
Civic, social or fraternal orQanizations' e C C e
Day care center' Ale Ale Ale P
Day care, family' A A A A
Day care, group' p p A P
Drinking establishment. C e e --
Drive-through establishment' Ale Ale Ale --
Education institution, private' P P P P
Education institution, public' P P P P
Equipment rental, sales, and service' -- C e --
Financial institution' p p P P
Flex space' -- p P --
Fuel sales facility' C P P --
Fuel sales facility, truck stop' -- -- C --
Health care or social services P P P P
Hospital' "- e e e
Hotel and motel' PIC PIC PIC --
Industry, information' P P P e
Industry, light' -- -- e e
Laundromat. P P P e
Laundry and dry cleaning -- C P -.
Multifamily development -. C e e
Mortuary e P p --
Nursery or urban farm' e P p e
Nursing or residential care facility' e e -- e
Parking facility C e P e
Parks, public and private P P P P
2
Chapter 2 Article B, COMMERICAL DISTRICTS
Personal or professional service
Public or quasi-public use<
Public, infrastructure
Public utilit , minor
Recreational vehicle park
Restaurant
Retail store
Storage facility, outside<
Stora e facility, self-service<
Temporary use
Vehicle repair, minor<
Vehicle sales or rental and service<
Vehicle washin facilit <
Vertical integrated residential roject<
Warehouse <
Wholesale sales
Wireless communication facilit <
Wireless communication facility, amateur radio
antenna
Wireless communication facilit , stealth
Ii" " , bl!Ø.;' Þ ',' '" "$"
P
P
A
P
P
A
C
A
P
C
P
P
P
P
C
P
P
P
P
A
C
A
P
P
P
P
A
A
C
A
A
A
c
c
A
C
A
P P
'"in ~r<J, "
P
8/29/05
L.O';
P
P
C
P
c
A
c
C
A
P
"C',
11-28-3: STANDARDS: The standards for all development in the commercial
districts shall be as follows:
A.
Dimensional standards:
1. Table 11-28-3 shall be used for determining required setbacks, street and
residential landscape buffers and maximum building height standards for
development in each of the respective commercial districts. Sections 11-
2A.2 through A.3 set forth certain exceptions and additional clarification for
the dimensional standards,
3
Chapter 2 Article B. COMMERICAL DISTRICTS
8/29/05
TABLE 11-2B-3: DIMENSIONAL STANDARDS IN THE COMMERCIAL DISTRICTS
c.c . (Nt L-a
0 20
0 20
10/5"
10
20
25
35
50
20 25 25 20
35 50 65 35
7,500 60,000 200,000 ' 10,000
'iprqpertydesignation based:Dt1
2, Encroachments allowed in any setback: Fire escapes may project a distance
not exceeding one (1) foot.
3, Maximum height ILimit:
a. The maximum height limitations shall not apply to the following
architectural features not intended for human occupation: spire or
steeple, belfry, cupola, chimney, Such architectural features shall have a
maximum height limit of twenty feet (20') as measured from the roof line.
b. The maximum height limitations shall not apply to the following: amateur
radio antenna; bridge tower; fire and hose tower; observation tower;
power line tower; smokestack; water tank or tower; ventilator; windmill;
wireless communication facility, or other commercial or personal tower
and/or antenna structure; or other appurtenances usually required to be
placed above the level of the ground and not intended for human
occupancy,
c, No exception shall be allowed to the height limit where the height of any
structures will constitute a hazard to the safe landing and take-off of
aircraft in an established airport,
4
Chapter 2 Article B, COMMERICAL DISTRICTS
5
8/29/05
d, Additional height not to exceed twenty percent (20%) of the maximum
height allowed for the district may be approved by the Director through
the Alternative Compliance procedures set forth in Chapter 5
ADMINISTRATION of this Title. Additional height shall be allowed when the
development provides ten percent (10%) of the building sq uare feet in
open space, courtyards, patios, or other usable outdoor space available
for the employees and/or patrons of the structure, excluding required
setbacks and landscape buffers.
e, Additional height exceeding twenty percent (20%) of the maximum
height allowed for the district or when additional height is requested
without providing the required open space in accord with paragraph d.
above, requires approval through a conditional use permit.
Chapter 2 Article B. COMMERICAL DISTRICTS
C.
D,
1
8/29/05
CHAPTER 2
DISTRICT REGULATIONS
ARTICLE C. INDUSTRIAL DISTRICTS
ARTICLE C. SECTIONS:
11-2C-1: PURPOSE
11- 2C-2: ALLOWED USES
11- 2C-3: STANDARDS
11- 2C-1 :
PURPOSE:
A.
LIGHT INDUSTRIAL DISTRICT (I-L): The purpose of the I-L District is to
provide for convenient employment centers of light manufacturing, research
and development, warehousing, and distributing. In accord with the Meridian
Comprehensive Plan, the I-L District is intended to encourage the
development of industrial uses that are clean, quiet and free of hazardous or
objectionable elements and that are operated, entirely, or almost entirely,
within enclosed structures. Accessibility to transportation systems is a
requirement of this District.
8,
HEAVY INDUSTRIAL DISTRICT (I-H) The purpose of the I-H District is to
provide for the existing manufacturing, warehousing and heavy distribution
centers that exist along major transportation corridors. In accord with the
Meridian Comprehensive Plan, these areas require buffering from residential
uses to mitigate the effects of noise, vibration, traffic, odor, dust, smoke or
glare that is typically associated with the uses allowed in the I-H District.
Accessibility to transportation systems is a requirement of this District.
11-2C-2 ALLOWED USES: Table 11-2C-1 lists principal permitted (P),
accessory (A), conditional (C), or prohibited (--) uses within each industrial district.
A.
Permitted uses and accessory uses shall be reviewed in accord with
Chapter 4 specific use standards of this Title,
8,
Conditional uses shall be approved in accord with the procedures and
regulations for conditional uses set forth in Chapter 5 administration and the
specific use standards in Chapter 4 specific use standards of this Title.
Any use not explicitly listed in Table 11-2C-1 is prohibited in all industrial
districts,
Uses that are listed as PIC or NC may be subject to a conditional use
permit depending on if the use is in accord with the specific use standards
as set forth in Chapter 4 specific use standards.
Chapter 2 Article c, INDUSTRIAL DISTRICTS
E.
8/29/05
Interpretation of the inclusion or exclusion of allowed uses shall be made by
the Director and based on the Director's findings in review of the criteria
established in Chapter 1 general regulations of this Title.
F,
For uses that may fall into more than one category, the Director shall
determine the most appropriate category based on the more restrictive
standards,
TABLE 11-2C-1: ALLOWED USES IN THE INDUSTRIAL DISTRICTS
::/ '
2
I,H
P
A
C
P
P
P
P
AlC
C
P
PIC
P P
P
C
P P
C C
A
C C
P P
P P
P P
P P
C
PIC PIC
A A
A A
Chapter 2 Article C. INDUSTRIAL DISTRICTS
" ,
" i,,"
11-2C-3:
STANDARDS:
A.
Dimensional standards:
8/29/05
,I I.L I.M
C PIC
P P
P P
A A
P P
P P
P P
P P
P
AlC A
P
P P
P P
P P
A A
P P
" r4.
1. Table 11-2C-2 shall be used for determining required setbacks, street and
use landscape buffers and maximum building height standards for
development in each of the industrial districts. Section 11-2C-3.A.2 sets
forth certain exceptions and additional clarification for the dimensional
standards.
TABLE 11-2C-2: DIMENSIONAL STANDARDS IN THE INDUSTRIAL DISTRICTS
,Y
3
Chapter 2 Article c, INDUSTRIAL DISTRICTS
8/29/05
2, Maximum height limit:
a. The maximum height limitations shall not apply to the following
architectural features not intended for human occupation: spire or
steeple, belfry, cupola, chimney, Such architectural features shall have a
maximum height limit of twenty feet (20') as measured from the roof line,
b, The maximum height limitations shall not apply to the following: amateur
radio antenna; bridge tower; fire and hose tower; observation tower;
power line tower; smokestack; water tank or tower; ventilator; windmill;
wireless communication facility, or other commercial or personal tower
and/or antenna structure; or other appurtenances usually required to be
placed above the level of the ground and not intended for human
occupancy,
c, No exception shall be allowed to the height limit where the height of any
structures will constitute a hazard to the safe landing and take-off of
aircraft in an established airport.
d. Additional height not to exceed twenty percent (20%) of the maximum
height allowed for the district may be approved by the Director through
the Alternative Compliance procedures set forth in Chapter 5
ADMINISTRATION of this Title, Additional height shall be allowed when the
development provides ten percent (10%) of the building square feet in
open space, courtyards, patios, or other usable outdoor space available
for the employees and/or patrons of the structure, excluding required
setbacks and landscape buffers.
e. Additional height exceeding twenty percent (20%) of the maximum
height allowed for the district or when additional height is requested
without providing the required open space in accord with paragraph d,
above requires approval through a conditional use permit.
4
Chapter 2 Article C, INDUSTRIAL DISTRICTS
8/29/05
CHAPTER 2
DISTRICT REGULATIONS
ARTICLE D. TRADITIONAL NEIGHBORHOOD DISTRICTS
ARTICLE D.
11-2D-1 :
11-2D-2:
11-2D-3:
11-2D-4:
11-2D-5:
SECTIONS:
PURPOSE
ALLOWED USES
STANDARDS APPLICABLE IN ALL TRADITIONAL NEIGHBORHOOD DISTRICTS
STANDARDS IN THE OLD TOWN DISTRICT (O-T)
STANDARDS IN THE TRADITIONAL NEIGHBORHOOD CENTER DISTRICT
(TN-C)
STANDARDS IN THE TRADITIONAL NEIGHBORHOOD RESIDENTIAL DISTRICT
(TN-R)
11-2D-6:
11- 2D-1: PURPOSE: The purpose of the traditional neighborhood districts is
to encourage mixed-use, compact development that is sensitive to the
environmental characteristics of the land and facilitates the efficient use of services,
Vertically integrated residential projects are encouraged in all traditional
neighborhood districts, A traditional neighborhood district diversifies and integrates
land uses within close proximity to each other, and it provides for the daily
recreational and shopping needs of the residents,
A.
OLD TOWN DISTRICT (O-T) The purpose of the O-T District is to
accommodate and encourage further intensification of the historical city
center in accord with the Meridian Comprehensive Plan, The intent of the 0-
T District is to delineate a centralized activity center and to encourage its
renewal, revitalization and growth as the public, quasi-public, cultural,
financial and recreational center of the City, Public and quasi-public uses
integrated with general business, and medium-high to high-density
residential is encouraged to provide the appropriate mix and intensity of
activities necessary to establish a truly urban city center,
B.
TRADITIONAL NEIGHBORHOOD CENTER DISTRICT (TN-C): The
purpose of the TN-C District is to serve as the focal point of a neighborhood
center, containing retail, commercial, and community services to meet the
daily needs of community residents within a one- to two-mile radius, A TN-C
is pedestrian-oriented, and it is designed to encourage pedestrian
connection with a Traditional Neighborhood Residential District. TN-C
District uses include small-scale retail, restaurants, recreational, personal
services, public or quasi-public uses, churches, and attached and multifamily
dwellings,
C,
TRADITIONAL NEIGHBORHOOD RESIDENTIAL DISTRICT (TN-R): The
purpose of the TN-R District is to provide for a variety of residential land
uses including attached and detached single-family residential, duplex,
townhouse, and multifamily, A TN-R District includes open spaces and
promotes pedestrian activity through well-designed and varied streetscapes
1
Chapter 2 Article D, TRADITIONAL NEIGHBORHOOD DISTRICTS
8/29/05
that also provide for the safe and efficient movement of vehicular traffic.
Most dwelling units should be accessed from alleys, The maximum density
of the TN-R District is fifteen (15) units per acre. The minimum density is six
(6) units per acre. Density should decrease away from the center and closer
to conventional residential districts, The TN-R District should be generally
located: adjacent to a TN-C District, along a transit corridor, or within a
mixed use neighborhood, For the purposes of this Title, the term residential
district shall also include the Traditional Neighborhood Residential District.
11-20-2: ALLOWED USES: Table 11-20-1 lists principal permitted (P),
accessory (A), and conditional (C) or prohibited (--) uses within each Traditional
Neighborhood District.
A.
Permitted uses and accessory uses shall be reviewed in accord with
Chapter 4 specific use standards of this Title,
B,
Conditional uses shall be approved in accord with the procedures and
regulations for conditional uses set forth in Chapter 5 administration and the
specific use standards in Chapter 4 specific use standards of this Title.
C,
Any use not explicitly listed in Table 11-20-1 is prohibited in all Traditional
Neighborhood Districts.
D.
Uses that are listed as PIC or AlC may be subject to a conditional use
permit depending on if the use is in accord with the specific use standards
as set forth in Chapter 4 specific use standards.
E.
Interpretation of the inclusion or exclusion of allowed uses shall be made by
the Director and based on the Director's findings in review of the criteria
established in Chapter 1 general regulations of this Title.
TABLE 11-20-1: ALLOWED USES IN THE
TRADITIONAL NEIGHBORHOOD DISTRICTS
2
TN-R
c c
p p C
P C C
C C C
A A A
P P C
C C
A A A
p p p
Chapter 2 Article D. TRADITIONAL NEIGHBORHOOD DISTRICTS
~ ,;::,::"',:",::,,\1~,
DwellinQ, single-family detached
Dwelling, townhouse
Dwelling, two-family duplex
Education institution, private*
Education institution, public*
Financial institution*
Health care or social services
Home occupation*
Hospital*
Hotel and motel*
Industry, information*
Industry, light*
Laundromat*
Multifamily development
Mortuary
NursinQ or residential care facility*
Parking facility
Parks, public and private
Personal or professional service
Public or Quasi-public use*
Public, infrastructure*
Public utility, minor
Restaurant
Retail store
Temporary use
Vehicle repair, minor*
Vertical inteQrated residential proiect*
Wireless communication facility, amateur radio antenna
Wireless communication facilit , stealth
:'~I~ ,,', : ",'. ,
'::':':
:::,W;""\N.lÙr,A',,"
,:'~,y: " "1'-
~Dß;¡~t
dllit,toIil.I.C ::
P C
P P
P C
P C
P P
P P
P P
A A
C --
PIC C
PIC PIC
C --
P P
P P
C C
C C
C C
P P
P P
P P
C C
C P
P P
P P
A A
A --
P P
A A
PIC PIC
" '" _'A:
riT"", "
8/29/05
TN-R"
P
P
P
C
PIC
C
--
A
--
u
--
--
A
P
--
C
--
P
C
C
C
P
h
n
A
.-
P
A
PIC
11-20-3: STANDARDS APPLICABLE IN ALL TRADITIONAL NEIGHBOR-
HOOD DISTRICTS: The standards for development in all the Traditional
Neighborhood Districts are set forth in this section as follows:
A.
Encroachments allowed in any setback: Open structures on the second floor
such as porches, canopies, balconies, platforms, covered patios, cornices,
eaves or other projections, which do not increase the volume of space
enclosed by the building and do not project into any required setback by
more than two feet (2').
B.
Maximum height limit:
1. The maximum height limitations shall not apply to the following
architectural features not intended for human occupation: spire or steeple,
belfry, cupola, chimney, Such architectural features shall have a maximum
height limit of twenty feet (20') as measured from the roof line,
3
Chapter 2 Article D, TRADITIONAL NEIGHBORHOOD DISTRICTS
8/29/05
2, The maximum height limitations shall not apply to the following: amateur
radio antenna; bridge tower; fire and hose tower; observation tower; power
line tower; smokestack; water tank or tower; ventilator; windmill; wireless
communication facility, or other commercial or personal tower and/or
antenna structure; or other appurtenances usually required to be, placed
above the level of the ground and not intended for human occupancy,
3. No exception shall be allowed to the height limit where the height of any
structures will constitute a hazard to the safe landing and take-off of
aircraft in an established airport,
4, In the TN-C District and 0- T districts, additional height exceeding the
maximum height allowed for the district requires approval through a
conditional use permit. In the TN-C, the additional height allowed is limited
to twenty percent (20%) of the maximum height allowed for the district.
C,
Street and pedestrian systems:
1, Street layout: The street system shall be based on a grid with connections
to the existing street system,
2. Block length: No block face shall have a length greater than five hundred
feet (500') without a dedicated street or alley, or no block face shall have a
length greater than seven hundred feet (700') without a pedestrian
connection. This standard may be varied for site design constraints or
hardship considerations.
D.
Parking: See Chapter 3 Article C. off-street parking and loading
requirements.
E.
Landscaping Requirements: See Chapter 3 Article B, landscaping
requirements,
11-20-4: STANDARDS IN THE OLD TOWN DISTRICT (O-T): The standards
for development in the Old Town District are set forth in this section as follows:
A.
Maximum building height is seventy-five (75').
B.
Minimum number of stories for new construction is two (2),
C,
Additional height exceeding the maximum height allowed requires approval
through a conditional use permit.
D.
Administrative design review:
1, All new construction and exterior modifications shall be subject to
administrative design review in accord with the procedures set forth in
CHAPTER 5 ADMINISTRATION of this Title.
4
Chapter 2 Article D. TRADITIONAL NEIGHBORHOOD DISTRICTS
8/29/05
2, The criteria for the administrative design review are set forth in the
document Downtown Meridian Design Guidelines,
3, Any applications that do not meet the criteria in the Design Guidelines
shall be subject to a conditional use permit as forth in CHAPTER 5
ADMINISTRATION,
E.
Parking: There are no off-street parking requirements in the Old Town
District.
F.
Landscaping Requirements: See Chapter 3 Article B. landscaping
requirements.
11-20-5: STANDARDS IN THE TRADITIONAL NEIGHBORHOOD CENTER
DISTRICT (TN-C): The standards for development in the Traditional Neighborhood
Center District are set forth in this section as follows:
A.
Maximum building height is forty-five (45').
8,
Minimum number of stories for new construction is two (2),
C,
Maximum building footprint is twenty thousand (20,000) square feet.
0,
Minimum contiguous district size is six (6) acres.
E.
Administrative design review:
1, All new construction and exterior modifications shall be subject to
administrative design review in accord with the procedures set forth in
CHAPTER 5 ADMINISTRATION of this Title,
2, The criteria for the administrative design review are set forth in the
document Meridian Traditional Neighborhood Center Design Guidelines.
3, Any applications that do not meet the criteria in the Design Guidelines
shall be subject to a conditional use permit as forth in CHAPTER 5
ADMINISTRATION,
11-20-6: STANDARDS IN THE TRADITIONAL NEIGHBORHOOD
RESIDENTIAL DISTRICT (TN-R): The standards for development in the Traditional
Neighborhood Residential District are set forth in this section as follows:
A.
5
Dimensional Standards:
TABLE 11-20-2: DIMENSIONAL STANDARDS IN THE TN-R DISTRICT
I, .:DlMENS"
~¡S1~
Chapter 2 Article D, TRADITIONAL NEIGHBORHOOD DISTRICTS
8/29/05
DETACHED
ATTACHED AND TWO.
FAMILY DUPLEX
6
15
***
***' right-at-way,
**.. aved, with ***' clearance ta structures
***
***
***
***
***
***
***
***
***
***
0
20
25
35
50
40
:! '
..
8,
Minimum property size: Each building site shall be of sufficient size to meet
the minimum setbacks as established in this section.
C.
Housing unit allocation: In the TN-R District, a minimum of two (2) housing
types, including but not limited to, single-family dwellings, townhouses, and
multifamily dwellings, shall be required on any subdivision submittal or
planned unit development application.
D.
Drainage:
1, In no case shall a development propose less than a five-foot (5') setback
adjacent to a property that is not part of the development application.
2, Properties shall provide adequate area to maintain drainage on the site.
6
Chapter 2 Article D. TRADITIONAL NEIGHBORHOOD DISTRICTS
1
8/29/05
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
SECTIONS:
11-3-1: PURPOSE
11-3-2: APPLICABILITY
11-3-1: PURPOSE: This chapter establishes regulations for all uses in
accord with the applicable districts, including specific regulations.
11-3-2:
follows:
APPLICABILITY: The regulations of this Chapter shall apply as
A.
All development shall be in accord with Article A. standard regulations in all
districts.
8.
All development shall be in accord with Article 8, landscaping requirements,
C.
All development shall be in accord with Article C, off-street parking and
loading requirements,
o.
All development shall be in accord with Article 0, sign requirements.
E.
All development shall be in accord with Article E. temporary use
requirements,
F.
All development shall be in accord with Article F, private street requirements,
G.
All development shall be in accord with Article G. common open space and
site amenity requirements of this Chapter,
Chapter 3 REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE A.
11-3A-1 :
11-3A-2
11-3A-3:
11-3A-4:
11-3A-5
11-3A-6:
11-3A-7:
11-3A-8:
11-3A-9:
11-3A-10:
11-3A-11 :
11-3A-12:
11-3A-13:
11-3A-14:
11-3A-15:
11-3A-16:
11-3A-17:
11-3A-18:
11-3A-19:
11-3A-20:
11-3A-21:
8/29/05
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE A. STANDARD REGULATIONS IN ALL DISTRICTS
SECTIONS:
PURPOSE
APPLICABILITY
ACCUMULATION OF JUNK
BIKEWAYS
CLEAR VISION TRIANGLE
DITCHES, LATERALS, CANALS OR DRAINAGE COURSES
FENCES
MULTIUSE AND MICRO PATHWAYS
NATURAL FEATURES
NOXIOUS USE
OUTDOOR LIGHTING
OUTDOOR SERVICE AND EQUIPMENT AREAS
OUTDOOR SPEAKER SYSTEMS
OUTDOOR STORAGE
PRESSURIZED IRRIGATION SYSTEM
SELF-SERVICE USES
SIDEWALKS AND PARKWAYS
STORM DRAINAGE
STRUCTURES SUBJECT TO DESIGN STANDARDS
TRAVELING SLEEPING QUARTERS
UTILITIES
11-3A-1: PURPOSE: This Article provides standard regulations for the
location, design, and development of new land uses and the alteration of existing
land uses. This Article supplements the regulations for development in each district
and in accord with Chapter 2 district regulations of this Title,
11-3A-2: APPLICABILITY: This Article shall apply to the development of all
principal permitted, accessory, and conditional uses, The following regulations are
the minimum standards of development. Additional standards may be applied in
accord with specific use standards, or other regulations of this Title.
11-3A-3: ACCUMULATION OF JUNK: The accumulation of junk on any
property not meeting the requirements of Chapter 4 specific use standards Section
11-4-3.41 of this Title is prohibited,
1
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
2
8/29/05
11-3A-4:
BIKEWAYS:
A.
Bikeways shall be encouraged within all subdivisions, within the public right-
of-way or separate easement, consistent with the City's Comprehensive
Plan,
B.
The Bicycle-Pedestrian Design Manual For Ada County (as prepared by the
Ada County Highway District) should be considered when reviewing bikeway
designs.
C,
Consistent with the Comprehensive Plan, on-street bikeways shall be
constructed on all collector streets.
11-3A-5:
CLEAR VISION TRIANGLE:
A.
Measurement of the clear vision triangle:
1, For two (2) public streets or a street and railroad crossing, the area is
defined by measuring from the intersection of the edge of the travel lane
(excluding parking and sidewalk) a distance of forty feet (40') along each
road. See Figure 11-3A-1.
2, For a public street and driveway or alley, the area is defined by measuring
from the intersection of the edge of travel lane and the corner of the
driveway or alley twenty feet (20') along the roadway and ten feet (10')
along the driveway or alley. See Figure 11-3A-1,
Figure 11-3A-1: Clear Vision Triangle Drawings
14' - 0" Minimum
3' - O' Maximum
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
8/29/05
EDGE OF DRIVEWAY""'"
b
-------:7¿::~:' ~---- ~~2~~,::,L:~~:~~~Y_~NE
EDGE OF ROAD
20'
EDGE OF ROAD ...
I
I
I
I
I
r
.I]: ,
SIGHT TRIANGLE ~;' i '\,
.I 0 I ,
// ..,. I "
.I ,
.I: I '
-ì-- -¡
~ 40' : "- PROJECTED
INTERSECTION
PROPERTY
LINE
8,
Standards, both at controlled and uncontrolled intersections:
1. Planting and Development Standards:
a. Any Class I or Class II trees planted within a clear vision triangle shall be
pruned to a minimum height of eight feet (8') above the ground or
sidewalk surface and fourteen feet (14') above the adjacent street
surface, See Figure 11-3A-1,
b, No evergreen trees shall be planted within any clear vision triangle,
C. No Class III trees shall be planted within any clear vision triangle.
d, The maximum height of any berm or vegetative groundcover at maturity
within the clear vision triangle shall be three feet (3') from the lowest
adjacent street grade.
e, No fences higher than three feet (3') from the lowest adjacent street
grade are permitted in the clear vision triangle,
f. No signs taller than three feet (3') are permitted in the clear vision
triangle, except for street/stop signs approved by the Transportation
Authority,
3
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
8/29/05
2. Other agency standards: In all cases, the Transportation Authority
standards shall apply in addition to City of Meridian standards.
11-3A-6:
DITCHES, LATERALS, CANALS OR DRAINAGE COURSES:
A.
Piping:
1, Natural waterways intersecting, crossing, or lying within the area being
developed shall remain as a natural amenity and shall not be piped or
otherwise covered, See also Section 11-3A-6.B.1,
2. Irrigation ditches, laterals, canals, and drains may be left open when used
as a water amenity or linear open space, See also Section 11-3A-6,B,2.
3, Except as allowed above, all other irrigation ditches, laterals or canals,
intersecting, crossing or lying within the area being developed, shall be
piped, or otherwise covered. This requirement does not apply to property
with only an irrigation easement where the actual drainage facility is
located on an adjoining property.
a, The City Council may waive the requirement for covering such ditch,
lateral, canal, or drain, if it finds that the public purpose requiring such
will not be served and public safety can be preserved.
b. The City Council may also waive this requirement for large-capacity
facilities.
B,
Fencing:
1. Fencing along all natural waterways shall not prevent access to the
waterway. In limited circumstances and in the interest of public safety,
larger open water systems may require fencing as determined by the City
Council, Director and/or Public Works Director.
2, Ditches, laterals, canals, and drains do not require fencing if it can be
demonstrated by the applicant to the satisfaction of the Director that said
ditch, lateral, canal, or drain serves as or will be improved as a part of the
development, to be a water amenity. Construction drawings and relevant
calculations prepared by a qualified licensed professional registered in the
State of Idaho shall be submitted to both the Director and the authorized
representative of the water facility for approval.
3. Except as allowed above, all other open irrigation ditches, laterals, canals,
and drains shall be fenced with a chain-link fence at least six feet (6') in
height and having an eleven (11) gauge, two-inch (2") mesh or other
construction, equivalent in ability to deter access to said ditch, lateral,
canal or drain, which fence shall be securely fastened at its base at all
4
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
8/29/05
places where any part of said lands or areas being subdivided touches
either or both sides of said ditch, lateral, canal, or drain.
C.
Impeding movement of water prohibited: For any irrigation or drainage ditch
not within the jurisdiction of an irrigation or drainage district, piping shall not
impede the movement of the amount of water crossing the property prior to
development or the amount of water delivered to downstream properties.
D.
Natural drainage courses: All natural drainage courses shall be left
undisturbed or be improved in a manner that will improve the hydraulics and
ease of maintenance of the channel. Relocation of natural swales is
acceptable if the hydraulics and ease of maintenance are provided for. The
term natural drainage course shall not be deemed to apply to minor swales
and depressions that are located entirely on the applicant's property and
which serve a relatively small area where runoff is infrequent.
11-3A-7: FENCES: The following regulations shall govern the type, location,
and construction of all fences:
A.
General Standards:
1, When a fence is erected not in conjunction with a building permit for a
principal use or building, a separate building permit is required.
2. Electric wire fencing shall be prohibited,
3, Barb wire fencing shall be prohibited, except in the C-C, C-G, I-L, and I-H
Districts when: a) used as the top section for security fencing; and b)
located a minimum of six feet (6') above grade to the bottom wire.
4, Unsightly materials: The use of boxes, sheet metal, old or decayed wood,
broken masonry blocks, or other like unsightly materials for fencing shall
be prohibited,
5. No fence shall obstruct access to public utility boxes, meters or other
infrastructure.
6. Fences shall be kept free from advertising and graffiti and maintained in
good repair.
7. Regulations for fences along micro-paths and common open space areas
are set forth below:
a, The developer is responsible for constructing fences adjacent to micro
path connections to distinguish common from private areas.
5
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
8/29/05
b, Fences adjacent to micro pathways and common open space shall be:
i. An open vision fence up to six feet (6') in height, as it provides
visibility from adjacent homes or buildings; or
ii. If closed vision fencing is used, it shall not exceed four feet (4') in
height. This does not allow four feet (4') of closed vision
fence with two feet (2') of open vision fencing,
c, Intent: These restrictions are intended to apply to interior common open
space areas and micro paths, They are not intended to apply to street
buffers or entryway landscaping strips, These restrictions are not
intended to require fencing on interior common open space.
8, A fence constructed in the public right-of-way shall require a license
agreement from the Transportation Authority,
9, If an owner or applicant desires to obtain an alternative compliance from
the provisions of this Section, the procedure shall be in accord with
Chapter 5 ADMINISTRATION of this Title.
10, See Section 11-3A-6,B.1 for additional fencing requirements along
irrigation ditches, laterals, canals, and/or drains,
B,
Additional standards in the C-N, C-C, C-G, I-L, and I-H Districts:
1. The maximum fence height shall not exceed eight feet (8'),
2, Open vision fences may be built to the property line,
C.
Additional standards in the R-2, R-4, R-8, R-15, R-40, L-O, O-T, TN-C, and
TN-R Districts:
1, The maximum fence height shall not exceed six feet (6'), subject to the
provisions set forth in Sections 2 and 3 below,
2. The maximum fence height in the required front yard including the front
and side yard property lines shall be three feet (3') for a closed vision
fence and four feet (4') for an open vision fence, See Figure 11-3A-2.
3. On corner properties, the maximum fence height in the required street side
yard shall be six feet (6') above the grade (as measured at the property
line), and the minimum setback shall be ten feet (10') from the street side
property line, See Figure 11-3A-3,
6
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
8/29/05
4, Where the rear yard of one property adjoins the front yard of another
property, the fence along the rear and side yards where they adjoin the
adjacent front yard shall be flush or angled at forty-five (45) degrees to
provide continuity with the adjoining fence and property line. See Figure
11-3A-3,
7
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
Figure 11-3A-2: Fence Regulations
3 feet maximum closed vision
4 feet maximum open vision
in required front yard
Utility boxes and meters must
be outside of fence enclosure
1
Property line ~
9/26/05
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
9/26/05
Figure 11-3A-3: Fence Regulations on Corner Properties
6 feet maximum
at front setback
./
3 feet maximum closed vision
~- ./ /' /' J 4 fe~t max!mum open vision
. . /' /' //1 In required front yard
./
~
. . ./' UtiJity boxes and meters must
'" . be outside of fence enclosure
2
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
11-3A-8:
MULTIUSE AND MICRO PATHWAYS:
A.
Multiuse and micro pathways shall be required consistent with the
Comprehensive Plan within new residential and commercial developments
as part of the public right-of-way or as separate easements so that an
alternate transportation system (which is distinct and separate from the
automobiles) can be provided throughout the urban service planning area.
B.
The Bicycle-Pedestrian Design Manual for Ada County (as prepared by the
Ada County Highway District) and the City of Meridian Parks and Recreation
Master Plan should be considered when reviewing pathway designs.
C,
Right-of-way for pathways in the middle of long blocks may be required
where necessary to obtain convenient pedestrian circulation to schools,
parks, other residential areas, and/or shopping areas.
D,
Pathways shall have easements at least fifteen feet (15') in width in accord
with Section 11-3B landscaping requirements of this Title.
E.
Micro pathways shall be less than two hundred and fifty feet (250') or two lot
depths in length and have a walking surface of least five feet (5') in width,
F,
Micro pathways shall comply with the landscaping requirements in accord
with Chapter 3 Article B landscaping requirements.
G,
Multiuse pathways along utility easements or connecting regional facilities
shall have a hard surface area of at least ten feet (10') unless more is
needed for utility access,
11-3A-9: NATURAL FEATURES: Existing natural features that add value to
development and enhance the attractiveness of the community (such as trees,
watercourses, historic spots and similar irreplaceable amenities) shall be preserved
or mitigated in the design of the development.
11-3A-10: NOXIOUS USE: No area or structure in any district shall be used or
occupied in any manner creating dangerous, injurious, noxious or hazardous
conditions to the surrounding areas.
A.
B.
1
Fire hazard, Any activity involving the use or storage of flammable or
explosive materials shall be protected by adequate fire-fighting and fire
prevention equipment and by such safety devices as are normally used in
the handling of any such materials. Such hazards shall be kept removed
from adjacent activities to a distance that is compatible with the potential
danger involved as specified in the Uniform Fire Code, Title 5 of the
Meridian City Code and the National Safety Foundation publications,
Radioactivity or electrical disturbance, No activity shall emit harmful
radioactivity at any point, or electrical disturbance adversely affecting the
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
operation of any equipment at any point other than that of the creator of
such disturbance,
C.
Vibration. No vibration shall be permitted that is discernible without
instruments on any adjoining property.
D,
Air pollution, Air pollution shall be subject to the requirements and
regulations established by the health authority.
E.
Erosion, No erosion shall be permitted that will carry objectionable
substances onto neighboring properties.
F,
Water pollution, Water pollution shall be subject to the requirements and
regulations established by the health authority.
G,
Hazardous materials, All hazardous material storage must comply with the
regulations and standards of the Fire Department.
H.
Noise, Noise shall be subject to the provision of Section 6-3-6 of the
Meridian City Code,
11-3A-11 :
OUTDOOR LIGHTING:
,
A.
The following types of lighting are exempt from the regulations of this
Section:
1. Light fixtures that have a maximum output of less than 260 lumens.
2. All outdoor lighting produced by the direct combustion of natural gas or
other fossil fuels such as kerosene lanterns or gas lamps.
3. Temporary holiday lighting used for forty (40) days or less per year,
4, Vehicular lights and all temporary emergency lighting needed for fire
protection, police protection, and/or other emergency services,
5. All hazard warning lights required by Federal or State regulatory agencies,
B.
The installation of any of the following types of lighting are prohibited:
1, Mercury vapor lamp fixture and/or lamp,
2, Laser source light or any similar high-intensity light when projected above
the horizontal.
2
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
3. Changing colors, strobe or moving lights, or searchlights (for advertising
purposes) are prohibited in all districts, except where approved for
temporary uses,
4. Lighting, including holiday lighting, on commercial or private tower
structures that exceed the district height limit is prohibited, except as
required by regulations of the Federal Aviation Administration (FAA).
C.
Standards.
1. Light fixtures that have a maximum output of 260 lumens or more shall
have an opaque top to prevent up-lighting.
2. Light fixtures that have a maximum output of 1,000 lumens or more per
fixture shall have an opaque top to prevent up-lighting, and the bulb shall
not be visible.
3. Light fixtures that have a maximum output of 1,800 lumens or more shall
have an opaque top to prevent up-lighting; the bulb shall not be visible and
shall have a full cut-off shield, See Figure 11-3A-4.
4, Light fixtures with a maximum output of 1,800 lumens or more shall be
placed such that the effective zone of light (as documented by the
photometric test report) shall not trespass on abutting residential
properties, See Figure 11-3A-5,
FIGURE 11-3A-4: EXAMPLES OF FULL GUT-OFF SHIELDS
ALLOWED
~~@(§)
- _.:::::~'\-/:'~::--::.. - .<~::~:::- <-'--:::::-- ",/ --
- -------':-' 'c,:------- , .- - ,', "-- .. ...----
// "-, .-" ':-'- '---- :, '-. '-'- ,-- ------,
"':,/ " ,i\ -..,:"-- ....' \ \'-, /~>: \,\\,,::,-,,'
,- ..
,', 'I
, ,
.:1': þ\ ~.......-.-- ~.:...-..- =-
, ,
NOT ALLOWED
3
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
FIGURE 11-3A-5: LIGHT TRESPASS
5, Floodlight fixtures shall be located in such a manner as to prevent direct
glare into a street and to minimize impact on abutting properties,
a, Floodlight fixtures shall be set to go on only when triggered by activity on
the property (sensor-activated) and to go off within 5 minutes after
activation has ceased.
b, Floodlight fixtures shall be installed so that they do not tilt up more than
45 degrees down from vertical.
6. Up-lighting shall only be allowed in cases where the fixture and any light it
emits are shielded from the sky by a roof overhang or similar structural
shield.
7, In residential districts, the height of a freestanding light fixture on private
property shall not exceed six feet (6'). Street lamps are exempt from this
height restriction.
8, Light fixtures mounted on a wall may extend to the full height of the
structure, but no farther,
9, Electrical feeds to outdoor light fixtures shall be underground, not
overhead.
10. Alternative compliance procedure: If an owner or applicant desires to
obtain an alternative compliance from the provisions of this Section, the
procedure shall be in accord with Chapter 5 ADMINISTRATION of this Title,
4
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
A.
8,
5
9/26/2005
11-3A-12:
OUTDOOR SERVICE AND EQUIPMENT AREAS:
A.
Outdoor mechanical equipment (including, but not limited to, heaters and
fans) shall not be located within fifty feet (50') of any abutting residential
districts. To reduce noise, permanently mounted mechanical equipment
shall be enclosed to the maximum extent possible.
8,
Outdoor utility meters, HVAC equipment, trash dumpsters, trash compaction
and other service functions shall be incorporated into the overall design of
buildings and landscaping so that the visual and acoustic impacts of these
functions are fully contained and out of view from adjacent properties and
public streets,
11-3A-13: OUTDOOR SPEAKER SYSTEMS: Any outdoor speaker system
associated with the use shall be located a minimum one hundred feet (100') from all
residential districts, No outdoor speaker systems shall be allowed within a
residential district. These standards may be waived through approval of a
Conditional Use Permit.
11-3A-14:
OUTDOOR STORAGE:
A.
All outdoor storage of material shall be maintained in an orderly manner so
as not to create a public nuisance, Materials shall not be stored within the
required yards, Stored items shall not block sidewalks or parking areas and
may not impede vehicular or pedestrian traffic.
8,
The site shall not be used as a vehicle wrecking or junkyard as herein
defined.
C,
Outdoor storage shall be incorporated into the overall design of buildings
and landscaping so that the visual and acoustic impacts of these functions
are fully contained and out of view from adjacent properties and public
streets,
11-3A-15:
PRESSURIZED IRRIGATION SYSTEMS:
System installation required: In each development, the applicant shall
provide underground, pressurized irrigation water. For subdivisions, each
and every lot within the subdivision shall have underground pressurized
irrigation water in compliance with Title 9, Chapter 1 water use and service.
The pressurized irrigation system shall be constructed and installed at the
same time as the domestic water lines, but it shall not necessarily be in the
same trenches.
Cross-connections: All cross-connections between the domestic water lines
and the irrigation water lines shall be in accord with the City's adopted
standards, specifications and ordinances,
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
6
9/26/2005
C.
Waiver of requirements: The requirements for pressurized irrigation may be
waived upon proof that any particular property does not have water rights in
an existing irrigation district. The City's domestic water system shall be the
last option for providing irrigation water to a proposed subdivision.
D,
If any property does not have water rights from an existing irrigation district,
the applicant shall pay well development feesas determined by the City,
11-3A-16: SELF-SERVICE USES: Any unattended, self-service uses, including
but not limited to, laundromats, automatic teller machines (ATMs), vehicle washing
facilities, fuel sales facilities, and storage facilities, shall comply with the following
requirements, The Meridian Police Chief or designee may approve alternative
standards where it is determined that a similar or greater level of security is
provided:
A.
Entrance or view of the self-service facility shall be open to the public street
or to adjoining businesses and shall have low-impact security lighting.
B.
Financial transaction areas shall be oriented to and visible from an area that
receives a high volume of traffic, such as a collector or arterial street.
C.
Landscape shrubbery shall be limited to no more than three feet (3') in
height between entrances and financial transaction areas and the public
street.
11-3A-17:
SIDEWALKS AND PARKWAYS:
A.
All sidewalks shall be a minimum of five feet (5'), except if detached
sidewalks are provided on local streets in residential subdivisions, the
minimum sidewalk width may be reduced to four feet (4').
B.
Sidewalks shall be designed to flare around mail boxes, utility boxes and
other impediments to pedestrian circulation to maintain a minimum four feet
(4') of travel width.
C.
Detached sidewalks shall be required along all arterial and collector streets.
The requirement for detached sidewalks can be waived by the Director for
sidewalks less than three hundred (300) linear feet in length and between
two adjoining properties with attached sidewalks,
D.
Sidewalks shall be required on both sides of the street, except where the
average width of lots, as measured at the street frontage line or at the
building setback line, is over one hundred fifty feet (150'); sidewalks on only
one side of the street may be allowed.
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
E.
The minimum width of parkways planted with Class II trees shall be eight
feet (8'). The width can be measured from the back of curb where there is
no likely expansion of the street section within the right-of-way; the parkway
width shall exclude the width of the sidewalk. Class II trees are the preferred
parkway trees.
1. Class I and Class III trees may be considered for parkway planters during
the landscape plan review. The Director shall evaluate such trees for their
suitability as parkway planter trees based on ultimate tree canopy, root
characteristics, and branching height. The minimum parkway planter for
Class I and Class III trees shall be ten feet (10'),
2. The planter width for Class II trees may be reduced to six feet (6') if there
are root barriers that are a minimum of eighteen inches (18") below sub-
grade adjacent to the sidewalk and a minimum of twenty-four inches (24")
below sub-grade adjacent to the curb. The root barriers shall extend two
inches (2") above grade,
11-3A-18: STORM DRAINAGE: An adequate storm drainage system shall be
required in all developments in accord with the City's adopted standards,
specifications and ordinances. Design and construction shall follow best
management practice as adopted by the City,
11-3A-19:
STRUCTURES SUBJECT TO DESIGN STANDARDS:
A.
Purpose:
1. To create unique character and quality architectural design in the
development of large structures.
2, To minimize the impact of the scale, bulk and color of large structures on
surrounding properties,
3. To encourage high-quality materials and longevity in large structures.
4, To protect the safety and convenience of pedestrian access to large
structures, and create attractive pedestrian amenities.
5. To provide greater attention to the design and location of large structures in
relationship to the surrounding street.
6. To locate noise-generating activities away from any adjacent residential
uses.
7, To create attractive and quality designed structures reflecting the unique
character of Meridian along the City's entryway corridors,
7
Chapter 3 Article A, STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
8, To guide the design of structures, not control the type, intensity or density of
the use,
B,
Applicability: All structures greater than the following sizes are subject to the
requirements of this section:
1, All structures greater than 7,500 square feet in the C-N District;
2, All structures greater than 10,000 square feet in the L-Q District;
3, All structures greater than 60,000 square feet in the C-C District; and
4, All structures greater than 200,000 square feet in the C-G District.
5, All structures on property adjacent to an entryway corridor,
C,
Standards
1, Architectural Character:
a. Facades: Facades visible from a public street shall incorporate
modulations in the façade, roof line recesses and projections along a
minimum of twenty percent (20%) of the length of the facade,
b, Primary public entrance(s): The primary building entrance(s) shall be
clearly defined by the architectural design of the building. Windows,
awnings, or arcades shall total a minimum of thirty percent (30%) of the
facade length facing a public street.
c, Roof lines: Roof design shall demonstrate two or more of the following:
a) overhanging eaves, b) sloped roofs; c) two (2) or more roof planes; d)
varying parapet heights; and e) cornices,
d, Pattern variations: At least two (2) changes in one (1) or a combination
of the following shall be incorporated into the building design: color,
texture and/ materials.
e, Mechanical equipment: All ground-level and rooftop mechanical
equipment shall be screened to the height of the unit as viewed from the
property line.
8
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
9/26/2005
2, Color and materials: Exterior building walls shall demonstrate the
appearance of high-quality materials of stone, brick, wood or other native
materials. Acceptable materials include tinted or textured masonry block,
textured architectural coated concrete panels, tinted or textured masonry
block, or stucco or stucco-like synthetic materials. Smooth-faced concrete
block, tilt-up concrete panels, or prefabricated steel panels are prohibited
except as accent materials.
3, Parking Lots: No more than seventy percent (70%) of the off-street
parking area for the structure shall be located between the front façade of
the structure and abutting streets, unless the principal building(s) and/or
parking is/are screened from view by other structures, landscaping and/or
berms.
4, Pedestrian walkways:
a. A continuous internal pedestrian walkway that is a minimum of eight feet
(8') in width shall be provided from the perimeter sidewalk to the main
building entrance, The walkway width shall be maintained clear of any
outdoor sale displays, vending machines, or temporary structures,
b. The internal pedestrian walkway shall be distinguished from the
vehicular driving surfaces through the use of pavers, colored or scored
concrete, or bricks.
c, Walkways at least eight feet (8') in width, shall be provided for any aisle
length that is greater than one-hundred fifty (150) parking spaces or two
hundred feet (200') away from the main building entrance.
d, The walkways shall have weather protection (including but not limited to
an awning or arcade) within twenty feet (20') of all customer entrances.
D.
Alternative compliance: The Director may approve, or recommend approval
of, an alternative compliance proposal in accord with Chapter 5
administration of this Title, when the overall design, as proposed by the
applicant, meets or exceeds the intent and the requirements of this Section
and shall not be detrimental to public health, safety, and welfare,
11-3A-20: TRAVELING SLEEPING QUARTERS: Recreation vehicles and
equipment, including but not limited to, travel trailers, fifth-wheels, recreational
vehicles, motor coaches, and tent, shall not be used as living quarters unless within
an approved campground or recreational vehicle park.
9
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
10
9/26/2005
11-3A-21 :
UTILITIES:
A.
All utilities for an approved use shall be installed at or below grade in accord
with the City's adopted standards. specifications and ordinances.
B,
Street lighting shall be installed in accord with the City's adopted standards,
specifications and ordinances,
C.
All development shall be connected to the City of Meridian water and sewer
systems, unless otherwise approved by the City Engineer.
1, All public water supply or sewer systems (serving one or more
separate premises or households) shall be constructed in accord
with the City's adopted master plans,
2, All new public water supply or sewer systems shall be an extension
of an existing public system,
D.
Fire hydrants and water mains: Adequate fire protection shall be required in
accord with the appropriate fire district standards.
Chapter 3 Article A. STANDARD REGULATIONS IN ALL DISTRICTS
ARTICLE B.
11-38-1 :
11-38-2:
11-38-3:
11-38-4:
11-38-5:
11-38-6:
11-38-7:
11-38-8:
11-38-9:
11-38-10:
11-38-11:
11-38-12:
11-38-13:
11-38-14:
11-38-1 :
A
9/26/2005
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE B. LANDSCAPING REQUIREMENTS
SECTIONS
PURPOSE
APPLICABILITY
APPLICATION REQUIREMENTS
APPLICATION PROCESS
STANDARDS AND INSTALLATION
IRRIGATION STANDARDS
LANDSCAPE BUFFERS ALONG STREETS
PARKING LOT LANDSCAPING
BUFFERS BETWEEN LAND USES
TREE PRESERVATION
STORMWATER INTEGRATION
MICROPATH LANDSCAPING
LANDSCAPE MAINTENANCE
INSTALLATION
PURPOSE:
The regulations of this Article are intended to promote landscaping in the
City of Meridian that will improve community livability, preserve the quality of
life, and enhance the aesthetic quality, economic viability, and environmental
health of the city,
B,
The City of Meridian recognizes that landscaping can be a significant
expense to business people and residents, At the same time, landscaping
improves the livability of residential neighborhoods, enhances the
appearance and customer attraction of commercial areas, increases
property values, improves the compatibility of adjacent uses, screens
undesirable views, and can reduce air and noise pollution.
C.
The intent of these regulations is to achieve a balance between the right of
individuals to develop and maintain their property in a manner they prefer
and the rights of City residents to live, work, shop, and recreate in pleasant,
healthy, and attractive surroundings.
D.
These regulations are intended to promote the use of native and other low-
water-use plant materials and to discourage landscaping that requires high
water use for maintenance, such as large expanses of lawn,
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
A.
c,
2
9/26/2005
11-38-2:
following:
APPLICABILITY: A landscape plan shall be required for the
A.
All development, redevelopment, additions, or site modifications, except
detached and attached single-family, two-family duplexes, and townhouse
dwelling units.
8,
All common lots in all subdivisions.
c,
All applications for a Conditional Use Permit (CUP), Preliminary Plat (PP),
Final Plat (FP), Certificate of Zoning Compliance (CZC), or Planned Unit
Development (PUD),
D.
Applicability of additions to existing structures: Existing development shall be
required to conform to this section based upon the following guidelines:
1. For additions less than twenty five percent (25%) of the existing structure
or developed area, no additional landscaping shall be required.
2. For additions that are twenty five percent (25%) to fifty percent (50%) of
the existing structure or developed area, perimeter and right-of-way
landscaping as required by this Article shall be installed,
3. For additions greater than fifty percent (50%) of the existing structure or
developed area, all current landscape standards of this Article shall be
met.
4. If the location of existing buildings or other structures prevents
conformance with the requirements of this section, or if its implementation
would create non-conformity, the Director shall determine how this Article
is to be applied through the Alternative Compliance process in accord with
Chapter 5 ADMINISTRATION of this Title.
11-38-3:
APPLICATION REQUIREMENTS:
All landscape plans shall comply with the requirements for size, scale,
number of copies, and contents as detailed in the application form.
8.
The landscape plan may be on the same site plan used to show parking
layout, setback compliance, etc.
All landscape plans shall be prepared by a landscape architect, landscape
designer, or qualified nurseryman,
Chapter 3 Article ß, LANDSCAPING REQUIREMENTS
9/26/2005
11-3B-4:
APPLICATION PROCESS:
A.
A preliminary landscape plan review is recommended prior to submission for
all developments, but is not required.
B,
A landscape plan will be reviewed in accord with the standards and
procedures set forth in this Article and approved by the Department.
C.
Landscape plan modification:
1, An approved Landscape Plan shall not be altered without prior approval of
the Planning Department.
2, No significant field changes to the plan are permitted,
3, Prior written approval of all material changes is required.
4, All approved changes to the landscape plan shall be documented prior to
issuance of a Certificate of Occupancy.
11-3B-5:
STANDARDS AND INSTAllATION:
A.
Approved plant material: The publication titled Tree Selection Guide for
Streets and Landscapes throughout Idaho by the Urban Forestry Unit of the
Boise Parks and Recreation Department (latest edition) is hereby adopted
by this reference as the City of Meridian's list of approved and prohibited
plant material. The publication categorizes the trees by size as Class I,
Class II, or Class III trees. The City recognizes that new plant varieties are
being produced every year and will consider other species not listed in the
publication. Copies of the publication will be available at the Planning
Department.
B.
Minimum plant sizes: The following are minimum plant sizes for all required
landscape areas:
TABLE 11-3B-1: MINIMUM PLANT SIZES
," T
Shade Trees:
Ornamental Trees:
Ever reen Trees:
Wood Shrubs:
., "
3
Chapter 3 Article 8, LANDSCAPING REQUIREMENTS
H,
4
9/26/2005
C.
Prohibited plant material: The plants listed under Trees Not Permitted for
Rights-of-Way Property Planting are prohibited from being planted along
any street or within any parking lot regulated by this Article. The only
exception is that conifers may be planted in the center of street buffers that
have a minimum width of twenty feet (20') as measured from the edge of the
sidewalk to the street curb, For public safety purposes, the location of such
conifers shall maintain view corridors of nonresidential structures.
0,
Tree species mix: When five (5) or more trees are to be planted to meet the
requirements of any portion of this Article (including street trees, street
buffers, parking lot landscaping and other landscape guidelines), a mix of
species shall be provided, The number of species to be planted shall vary
according to the overall number of trees required to be planted. See the
table below:
TABLE 11-3B-2: REQUIRED NUMBER OF TREES AND SPECIES
5 to 10
11t030
31 to 50
more than 50
;!NUMBER OF SPECIES
2
3
4
5
E.
Plant quality: All plant material installed pursuant to this Article shall meet or
exceed the minimum federal standards as regulated by ANSI Z60,1,
American Standard for Nursery Stock,
F.
Planting standards: All trees, shrubs, and other plant material shall be
planted using accepted nursery standards as published by the American
Association of Nurserymen (latest edition) including hole size, backfilling,
and fertilization.
G.
Staking: tree staking is not required but may be used in areas with high
winds or other situations that make staking desirable, If trees are staked, the
stakes shall be removed within 12 months to prevent damage to the tree,
Mulching: Mulch shall be used in all required planting areas, Approved
mulches may be organic, such as bark or soil aid, or they may include rock
products, such as "permabark" or similar products. Use of mulch, organic or
rock, as the only groundcover in required planting areas is prohibited.
Required landscape areas shall be at least seventy percent (70%) covered
with vegetation at maturity, with mulch used under and around the plants,
Pea gravel, drain rock, road base gravel, and similar products shall not be
used as mulch, All mulch shall be contained by a curb or other edging
material to contain the mulch and prevent it from migrating to adjacent
surfaces. If rock mulch is used, a weed barrier fabric shall be used beneath
the rock, Impermeable plastic weed barriers are prohibited because they
restrict water and oxygen to the plants,
Chapter 3 Article ß, LANDSCAPING REQUIREMENTS
5
9/26/2005
I.
Curbing: All planting areas that border driveways, parking lots, and other
vehicle use areas shall be protected by curbing, wheel stops, or other
approved protective devices. Such devices shall be a minimum of thirty
inches (30") from all tree trunks to prevent cars from damaging tree trunks.
j,
Utilities: The following standards apply to the planting of trees near existing
utilities and to trenching for new utilities near existing trees:
1. Overhead utilities: Only Class I trees in the Recommended Plant List may
be planted under or within ten (10) lateral feet of any overhead utility wires.
2, Underground utilities: All trees shall be planted outside of any easement
that contains a City water or sewer main, unless written approval is
obtained from the City Engineer. If any utility easement precludes trees
required by this Article, the width of the required buffer shall be increased
to accommodate the required trees.
3, Trenching: New underground utilities shall stay outside of the dripline of
existing trees if trenched, or be tunneled a minimum of three (3') feet
below existing grade within the tree's dripline. The guiding principle is that
no root two inches (2') or larger shall be cut. Note: This requirement is for
placement of new utilities and does not affect the City's ability to access
existing utilities for repair and maintenance,
K.
Erosion control: The landscape installation shall stabilize all soil and slopes.
L.
Berms: berm slopes shall not exceed 2: 1 (horizontal: vertical), 3: 1 maximum
slopes are recommended. Grass that requires mowing shall not be used on
slopes steeper than 3: 1.
11-38-6:
IRRIGATION STANDARDS:
A.
Irrigation required: All landscape areas regulated by this Article shall be
served with an automatic underground irrigation system, Additional
requirements affecting pressurized irrigation systems can be found in the
Meridian City Code Section 9-1-28 pressurized irrigation,
8.
Performance specifications: Three (3) copies of detailed irrigation
performance specifications shall be submitted with the landscape plan for all
Final Plats and Certificates of Zoning Compliance. Performance
specifications shall state design requirements, materials, construction
methods, and point of connection, and the following specifications:
1, Coverage, The irrigation system shall be designed to provide 100%
coverage with head-to-head spacing or triangular spacing as appropriate.
2. Matched precipitation rates, Sprinkler heads shall have matched
precipitation rates within each control valve circuit.
Chapter 3 Article 8, LANDSCAPING REQUIREMENTS
A.
B,
6
9/26/2005
3. Irrigation districts. Sprinkler heads irrigating lawn or other high-water-
demand areas shall be circuited so that they are on a separate zone or
districts from those irrigating trees, shrubs, or other reduced-water-
demand areas.
4, Overspray. Sprinkler heads shall be adjusted to reduce overspray onto
impervious surfaces such as streets, sidewalks, driveways, and parking
areas.
C.
Backflow prevention: Provide an appropriate backflow prevention device as
required by Meridian City Code Chapter 9, Article 3 cross connection
control.
0,
Irrigation water: Use of non-potable irrigation water is required when
determined to be available by the City Public Works Department as set forth
in Meridian City Code Section 9-1-28 pressurized irrigation, Water
availability during the fall and spring seasons is also required by connecting
to City potable water or an on-site well as a secondary source, except where
xeriscape landscaping has been provided, If City potable water is used, a
separate water meter is required so the owner can avoid paying sewer fees
for irrigation water,
E.
Subdivision irrigation systems: If the irrigation system is part of a plat, any
irrigation pump station shall be on a common lot. The irrigation system shall
be owned and maintained by an irrigation district or an Owners Association.
11-3B-7:
LANDSCAPE BUFFERS ALONG STREETS:
Purpose: The intent of these requirements is to ensure the long term and
consistent maintenance of landscape buffers along streets that improve the
visual quality of the streetscape, unify diverse architecture, and carry out the
Comprehensive Plan policies related to promoting attractive street(s) and
street beautification.
Applicability: Landscape buffers shall be required along streets in all
locations, except for local streets adjacent to single-family residential,
duplex, and townhouse properties,
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
7
9/26/2005
C.
Standards for landscape buffers along streets shall be as follows:
1, Buffer size: See Chapter 2 DISTRICT REGULATIONS,
a. Street buffers with attached sidewalks: All street buffers with attached
sidewalks shall be measured from the property line and not from the
sidewalk or curb,
b. Where the buffer is encumbered by easements or other restrictions, the
buffer area shall include a minimum five-foot (5') wide area for planting
shrubs and trees,
c. Width reduction: In a development where the required street buffer width
results in an otherwise unavoidable hardship to the property, a written
request for a buffer reduction may be submitted through the Alternative
Compliance process in accord with Chapter 5 ADMINISTRATION of this
Title. The request shall demonstrate evidence of the hardship caused by
the required street buffer and propose a specific alternative width. In no
case shall the width be reduced to less than ten percent (10%) of the
depth of the lot, except in Old Town.
2. Buffer location: Landscape buffers along streets shall be located at all
subdivision boundaries,
a, All residential subdivision street buffers shall be on a common lot,
maintained by a home-owners association,
b. All commercial, industrial, and other nonresidential street buffers
shall be on a common lot or on a permanent easement, maintained
by the property owner or business owners association.
c. Except where fences and walls are used as decorative landscape
elements, fences and walls are permitted only on the interior edge of
the street buffer.
3. Street trees:
a. All required landscape buffers along streets shall be planted with
trees and shrubs, lawn, or other vegetative groundcover.
b, The minimum density of one (1) tree per thirty-five (35) linear feet is
required. If this calculation results in a fraction five (5) or greater,
round up to an additional tree, If the calculation results in a fraction
less than five (5), round the number down.
c, Large shrubs, hedges and conifers should be used sparingly and in
clusters that are well integrated with the landscape design, Such
plants shall not screen or create a public safety hazard.
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
9/26/2005
d, Where street trees are within a parkway, they shall be centered
within the parkway planter. Where street trees are not within a
parkway, they shall be off-set a minimum of five feet (5') from the
edge of sidewalk.
4, Tree spacing: For design flexibility, trees may be grouped together or
spaced evenly as desired, However, trees shall be spaced no closer than
eighty percent (80%) of the average mature width of the trees, as
demonstrated in the following examples:
FIGURE 11-38-1: TREE SPACING
Examples:
x
Icfj
TIL
( .xtl) .8
2
(4I)i~Hl).8 = 32'
Min spacing)
Minimum Tree Spacing.
Examples:
F1l
DL
(~iY).8
(40+1~).8 = 22'
2
Min Spacing )
Minimum Tree Spacing.
5. Landscaping within right-of-way:
a. If the unimproved street right-of-way is ten feet (10') or greater from
edge of pavement to edge of sidewalk or property line, and street
widening project is not in the Transportation Authority's five-year
funded plan, developer shall maintain a ten- (10) foot-wide
compacted gravel shoulder meeting the construction standards of
the Transportation Authority and landscape the remainder with lawn
or other vegetative groundcover.
8
Chapter 3 Article B, LANDSCAPING REQUIREMENTS
9/26/2005
b, Landscaping improvements within the right-of-way shall require a
license agreement between the property owner and the
Transportation Authority,
6, Impervious surfaces: Allowed impervious surfaces within the landscape
buffer include driveways, signs and walkways, Vehicle display pads and
other related impervious surfaces are prohibited in the required buffer.
7, Berms in street buffers: Berm design is subject to the provisions in accord
with subsections 11-3B-5.L of this Article,
8, Stormwater detention: Stormwater swales may be incorporated into the
buffer in accord with subsection 11-3B-11 of this Article, Other stormwater
detention and retention facilities shall not be permitted in the street buffer,
except along 1-84.
11-3B-8:
PARKING LOT LANDSCAPING:
A.
Purpose: The purpose of perimeter and internal parking lot landscaping is to
soften and mitigate the visual affect of a large expanse of asphalt in parking
lots, Landscaping can also reduce summer heat gain in parking areas and
define pedestrian ways.
B,
Applicability: The requirements for perimeter and internal lot landscaping
shall apply to all commercial, industrial and multifamily development, with
the following exceptions:
1, Industrial exclusion: Parking spaces adjoining loading areas in the I-L and
I-H districts are excluded from the interior landscape requirements.
2, For parking lot replacement that is greater than fifty percent (50%) of the
parking area, all current landscape standards of the Article shall be met.
3. If the location of existing buildings or other structures prevents
conformance with the requirements of this section, or if its implementation
would create a nonconformity with parking standards, the Director shall
determine how this Article is to be applied through the Alternative
Compliance process.
9
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
10
9/26/2005
C.
Standards:
1. For perimeter landscaping: The following standards apply to all interior lot
lines, side or rear, adjacent to parking lots or other vehicular use areas,
including driveways:
a. Provide a five- (5) foot minimum perimeter landscape buffer along all
interior lot lines that are adjacent to parking, loading, or other paved
vehicular use areas, including driveways, vehicle sales areas, truck
parking areas, bus parking areas, and vehicle storage areas. This
requirement may be reduced at the determination of the Director where
there is a shared driveway with an adjacent property.
b. Landscaping: The perimeter landscape buffer shall be planted with one
(1) tree per thirty-five (35) lineal feet and shrubs, lawn, or other
vegetative groundcover.
c, Encroachments: Structures less than 120 square feet, including but not
limited, to trash enclosures and storage sheds, may encroach into the
perimeter landscape buffer,
2. For internal landscaping: Interior parking lot landscaping shall be required
on any parking lot with more than twelve (12) spaces. The following
standards apply to internal landscaping:
a. Planter size: Landscape planters shall contain a minimum of fifty (50)
square feet, and the planting area shall not be less than five feet (5') in
any dimension, measured inside curbs. The only exception to the five-
foot minimum dimension is at the tip of triangular planters located at the
end of rows of angled parking,
b, Parking spaces: No linear grouping of parking spaces shall exceed
twelve (12) in a row, without an internal planter island. The planter island
shall run the length of the parking space and may be reduced by two
feet (2') to allow for improved vehicular maneuvering.
c, Parking lot layout: Interior landscaping shall, insofar as possible, be used
to delineate and guide major traffic movement within the parking area so
as to prevent cross-space driving, Interior landscape planters shall be
spaced as evenly as feasible and at the ends of rows of parking
throughout the lot to consistently reduce the visual impact of long rows of
parked cars.
d. Trees required: Each interior planter that serves a single row of parking
spaces shall be landscaped with at least one (1) tree and shall be
covered with low shrubs, lawn, or other vegetative groundcover, Each
interior planter that serves a double row of parking spaces shall have at
least two (2) trees and shall be covered with low shrubs, lawn, or other
vegetative groundcover. Deciduous shade trees shall be pruned to a
Chapter 3 Article 8, LANDSCAPING REQUIREMENTS
9/26/2005
minimum height of eight feet (8') above the adjacent parking areas.
Evergreen trees and Class III trees are prohibited in interior planters.
e, Design flexibility: In parking areas where the strict application of this
subsection 11-3B-7C will seriously limit the function and circulation of the
lot, up to fifty percent (50%) of the required landscaping may be located
near the perimeter of the paved area to emphasize entrance corridors or
special landscape areas within the general parking area. Such required
interior landscaping that is relocated shall be in addition to perimeter
landscape and right-of-way screening requirements,
11-3B-9:
LANDSCAPE BUFFERS TO ADJOINING USES:
A.
Purpose: The requirements in this section shall apply to the landscape
buffer to residential uses in Table 11-2B-3 and the landscape buffer to non-
industrial uses in Table 11-2C-3, The landscape requirements in this section
are intended to ensure that incompatible, adjoining land uses are adequately
protected and are provided an appropriate amount of land separation to
conduct permitted uses without causing adverse impact.
B.
Applicability: The landscape buffer is required in the C-N, C-C, C-G, and L-Q
districts on any parcel sharing a contiguous lot line with a residential land
use. The landscape buffer is required in the I-L and I-H districts on any
property sharing a contiguous lot line with a nonindustrial use,
C.
Standards:
1. Buffer materials: The materials within the required buffer between
incompatible land uses are regulated as follows:
a, Mix of materials: All buffer areas shall be comprised of, but not limited to,
a mix of evergreen and deciduous trees, shrubs, lawn, or other
vegetative groundcover, Fences, walls and berms may also be
incorporated into the buffer area,
b. Barrier effectiveness: The required buffer area shall result in a barrier
that allows trees to touch at the time of the tree maturity.
c, Buffer wall and/or fence: Where existing or proposed adjacent land uses
cannot be adequately buffered with plant material(s), the City may
require inclusion of a wall, fence, or other type of screen that mitigates
noise and/or unsightly uses. If a wall or fence at least six feet (6') tall is
provided, the planting requirement may be reduced to at least one tree
per 35 lineal feet, plus shrubs, lawn, or other vegetative groundcover.
11
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
9/26/2005
d. Chainlink Fencing: Chainlink fencing with or without slats does not
qualify as a screening material. Except in the I-L and I-H districts,
chainlink or cyclone fencing is prohibited within required buffers between
different land uses. Chainlink may be used beyond the required buffer,
2. Minimum buffer size: The size of the buffer is determined by the district in
which the property is located, The tables of dimensional standards for
each district in accord with Chapter 2 DISTRICT REGULATIONS of this Title
establish the minimum buffer size,
3, Pedestrian access: Landscape buffers shall facilitate pedestrian access
from residential development to abutting commercial districts and vice
versa,
4. Relationship to parking lot perimeter requirements: All buffers between
different land uses may include any required perimeter parking lot
landscape buffers (see subsection 11-38-9B) when calculating the
minimum width of the buffer,
5. Buffers along planned pathways: All commercial, industrial, and
employment developments shall provide a five-foot- (5') wide minimum
buffer adjacent to any planned pathways in the City's Comprehensive Plan
or Park System Master Plan, The buffer shall be planted with a minimum
of one (1) tree per thirty-five (35) lineal feet.
6. Open water ponds: Aesthetically designed open water ponds and holding
areas may comprise up to twenty-five percent (25%) of a required open
space area, All ponds with a permanent water level shall meet the
following standards:
a, The pond shall have recirculated water.
b, The pond shall be maintained such that it does not become a mosquito
breeding ground.
11-38-10:
TREE PRESERVATION:
A.
Purpose: The regulations of this section are intended to preserve existing
trees four-inch (4") caliper or greater from destruction during the
development process,
B.
Applicability: Tree preservation is required in all districts.
12
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
13
9/26/2005
C,
Standards:
1. Site plans: Site plans shall make all feasible attempts to maintain existing
trees four-inch (4") caliper or greater within their design.
2. Landscape plan: All existing trees greater than four-inch (4") caliper shall
be shown on the landscape plan, Indicate whether each tree is to be
retained or removed. Include on the plan a description of how existing
trees to be retained are to be protected during construction.
3, Protection during construction: Existing trees that are retained shall be
protected from damage to bark, branches, and roots during construction,
The City of Meridian Parks Department arborist shall approve the
protection fence(s) prior to construction, Any severely damaged tree shall
be replaced in accord with subsection 11-3B-1 O,C.5 of this Article.
4, Construction within the dripline of existing trees: Construction, excavation,
or fill occurring within the drip line of any existing tree shall be avoided.
Specific requirements for construction within the dripline of existing trees
are as follows:
a. Paving: Whenever possible, impervious paving surfaces shall remain
outside of the dripline of existing trees. When it is not possible,
impervious surfaces shall be allowed at a distance from the trunk of a
retained tree equal to the diameter of the tree trunk plus five feet (5').
b, Grade changes: Grade changes greater than six inches (6") are
prohibited within the dripline of existing trees.
c. Compaction: A fence or barrier that encloses the entire area beneath the
tree canopy shall be in place prior to construction,
d. Utilities: New underground utilities to be placed within the dripline of
existing trees shall be installed in accord with subsection 11-3B-5.J.3 of
this Article.
5. Mitigation:
a, Mitigation shall be required for all existing trees four-inch (4") caliper or
greater that are removed from the site with equal replacement of the
total calipers lost on site up to an amount of one hundred percent
(100%) replacement. (Example: two (2) 10-inch caliper trees removed
may be mitigated with four (4) 5-inch caliper trees, five (5) 4-inch caliper
trees, or seven (7) 3-inch caliper trees.)
b, No mitigation is required in the following: (i) existing prohibited trees
within the street buffer or parking lot; (ii) existing dead, dying, or hazard
trees certified prior to removal by the City of Meridian Parks Department
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
9/26/2005
arborist; (iii) trees that are required to be removed by another
governmental agency having jurisdiction over the project.
6, Required landscaping: Existing trees that are retained or relocated on site
may count toward the required landscaping, Mitigation trees are in addition
to all other landscaping required by this Article,
7, Incentives: The Director may allow a reduction up to ten percent (10%) of
the required parking spaces to accommodate existing trees through the
Alternative Compliance process in accord with Chapter 5 ADMINISTRATION
of this Title. Approval of the reduction in required parking shall be obtained
in writing prior to submittal of plans,
11-3B-11 :
STORMWATER INTEGRATION:
A.
Purpose: The regulations of this section are intended to improve water
quality and provide a natural, effective form of flood and water pollution
control through the integration of vegetated, well-designed stormwater
filtration swales into required landscape areas, where topography and
hydrologic features allow,
B.
Applicability: The standards for stormwater integration shall apply to all
subdivisions, site improvements and ACHD stormwater facilities,
c.
Standards
1. Stormwater swales incorporated into required landscape areas shall be
vegetated with grass or other appropriate plant materials. Such swales
shall also be designed to accommodate the required number of trees as
per Section 11-3B-7 if located in a street buffer or other required
landscape area,
2. A rock sump may be incorporated into a vegetated swale to facilitate
drainage. The rock sump inlet may not exceed more than five feet (5') in
any horizontal dimension, Grates for sand/grease interceptors may also be
incorporated, but the inlet structures may not exceed two feet (2') in any
horizontal dimension.
3, Gravel, rock, sand, or cobble stormwater facilities are not permitted on the
surface of required landscape areas, unless designed as a dry creek bed
or other design feature,
4, Plant materials shall be a species that are able to withstand the anticipated
changes in soil wetness and moisture levels.
5. Organic mulch shall not be used against drainage catch basins because of
potential sediment clogging,
14
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
9/26/2005
6. Slopes shall be less than or equal to 3:1 (horizontal: vertical) for
accessibility and maintenance.
7. The stormwater facility shall be designed free-draining with no standing
water within twenty four (24) hours of the completion of a storm event.
11-38-12:
MICRO PATHWAY LANDSCAPING:
A
Purpose: The purpose of this section is to promote trees and other
landscaping along micro pathways developed within the City. The required
landscaping will provide shade and visual interest along the micro pathways,
B,
Applicability: Whenever micro pathways are installed, the landscaping
standards within this section shall apply,
C.
Standards:
1, Planter width: A landscape strip a minimum of five feet (5') wide shall be
provided along either side of the micro pathway. Designs are encouraged
in which the landscape buffers alternates along either side of the micro
pathway and provides additional width to allow trees to be planted farther
from the pathway, preventing root damage to the path,
2, Required plants: The landscape buffers shall be planted with a minimum
of one (1) deciduous tree per thirty-five (35) linear feet of either side of the
micro pathway and shrubs, lawn, or other vegetative ground cover,
3, Improvements: The pathways shall be paved with two (2) inches of
asphaltic concrete or equivalent.
4, Tree branching height: Trees along the pathway shall be pruned with a
clear branching height of at least eight feet (8') above the path surface,
5, Shrub height: Shrubs are limited to three feet (3') high or less at mature
size to allow for safety provisions and sight distance.
6, Mulch: The solitary use of mulches, such as bark alone without vegetative
ground covers, is prohibited, Mulch under the trees and shrubs is required
in accord with subsection 11-3B-3.H. of this Article.
7, Prohibited trees: No evergreen trees or Class III trees shall be planted
within the required landscape strip because of safety, sight distance, and
maintenance concerns.
8, Fences: See Section 11-3A-7 of this Title for micro pathway fencing
standards,
11-38-13:
LANDSCAPE MAINTENANCE:
15
Chapter 3 Article 8, LANDSCAPING REQUIREMENTS
9/26/2005
A.
Purpose: The regulations of this section are intended to ensure that all
required landscaping is maintained in a healthy, growing condition at all
times.
B.
Applicability: The requirement for landscape maintenance applies in all
districts where landscaping has been required,
C,
Standards:
1, Responsibility: The property owner is responsible for the maintenance of
all landscaping and screening devices required by this Article,
2. Topping prohibited: Topping any street tree required by this Article is
prohibited,
3, Tree grates: Tree grates shall be widened to accommodate the growing
tree trunk and prevent girdling of any trees planted in tree wells within
sidewalks or other public right-of-way.
4, Dead and diseased plant materials: Plant materials that exhibit evidence of
insect pests, disease, and/or damage shall be appropriately treated to
correct the problem. Dead plant materials shall be replaced.
5, Inspections: All landscaping required by this subsection may be subject to
periodic inspections by City officials to determine compliance or to
investigate.
11-3B-14:
INSTALLATION:
A.
Certificate of completion: A written certificate of completion shall be
prepared by the landscape architect, landscape designer or qualified
nurseryman responsible for the landscape plan upon completion of the
landscape installation, The Certificate of Completion shall verify that all
landscape improvements, including plant materials and sprinkler installation,
are in substantial compliance with the approved landscape plan.
B,
Installation schedule:
1. All required landscaping, irrigation systems and site features shall be
installed according to the approved landscape plan prior to issuance of a
final Certificate of Occupancy,
16
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
9/26/2005
2, Private site improvements that are above and beyond the requirements
placed on the development do not require completion prior to occupancy,
(For example a clubhouse in a residential development need not be
completed prior to occupancy of residences in the development).
3, For final plats, all landscape buffers along streets, with the exception of
local streets, shall be installed prior to signature on the final plat. Street
buffers on local streets may be installed at the time of the lot development;
installation of such improvements shall not be required at the time of plat
approval.
C,
Extension of time for installation: The Director may issue a Temporary
Certificate of Occupancy for a specified time period, not to exceed one
hundred eighty (180) days when:
1, Due to weather or other circumstances, the landscaping or other required
site amenities cannot be completed; and
2, The applicant has bonded for the required improvements consistent with
the provisions of Chapter 5 Article C, SURETY AGREEMENTS of this Title,
17
Chapter 3 Article B. LANDSCAPING REQUIREMENTS
9/26/2005
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE C. OFF-STREET PARKING AND LOADING REQUIREMENTS
ARTICLE C.
11-3C-1 :
11-3C-2:
11-3C-3:
11-3C-4:
11-3C-5:
11-3C-6:
11-3C-7:
11-3C-8:
SECTIONS:
PURPOSE
APPLICABILITY
PROCESS
PARKING USE REGULATIONS
DESIGN STANDARDS
REQUIRED NUMBER OF OFF-STREET PARKING SPACES
PARKING REDUCTION
OFF-STREET LOADING SPACE REQUIREMENTS
11-3C-1: PURPOSE: The purpose of this Article is to provide regulations and
standards for off-street parking and loading facilities with the intent to provide off-
street parking areas, minimize traffic hazards and congestion, and mitigate impacts
on surrounding properties,
11-3C-2: APPLICABILITY: The following standards shall apply to any new
construction, alteration, or moving of a structure or any new or more intense use of
property, The number of off-street parking spaces, as set forth in this Article, shall
be provided for all allowed uses in any district. A greater number of spaces may be
required in any application involving a conditional use permit.
11-3C-3: PROCESS: An off-street parking and loading plan shall be
required as a component of any discretionary permit or applicable building permit.
Such plan shall show the following:
A.
The off-street parking and loading plan shall contain the location, size, and
type of all proposed off-street parking and loading facilities.
B,
If the proposed development project shall be completed in phases, such
phases shall be noted on the plan,
11-3C-4:
PARKING USE STANDARDS:
A.
Required parking spaces shall be used for vehicle parking only.
B,
Parking areas for residential dwellings:
1. Parking of one (1) commercial vehicle as defined in Chapter 1 GENERAL
REGULATIONS of this Title per property may be allowed, provided it is
operated by the occupant and used to commute from home to work at an
off-site location or used as part of an approved home occupation,
Chapter 3 Article c. OFF-STREET PARKING AND LOADING REQUIREMENTS
9/26/2005
2. Vehicles without current registration shall not be parked or stored on any
residential property other than in an enclosed space,
3. One (1) boat and one (1) travel trailer may be stored in the side or rear
yard.
11-3C-5:
DESIGN STANDARDS:
A.
Design of parking areas.
1, All parking areas shall be designed and constructed to provide the type
and number of off-street parking spaces required by Section 11-3C-6 of
this Title, and designed as required by this Section,
2. Location of parking spaces relative to structure(s),
a, Parking spaces for all detached residential dwelling units shall be located
on the same lot as the use that they are intended to serve.
b. Parking for attached residential dwelling units shall be located not more
than three hundred feet (300')from the structure(s), except as provided
by Section 11-3C- 7.
c, Parking spaces for nonresidential uses shall be located not more than
five hundred feet (500') from structure(s), except as provided by Section
11-3C- 7,
d. For any vertically integrated residential project, not more than ten
percent (10%) of the required parking shall be located in the front of the
structure.
3, Off-street parking spaces shall not be located in any landscape buffer as
required by Article B. LANDSCAPING REQUIREMENTS of this Chapter.
4. Parking lots shall be designed in accord with Section 11-3B-8 PARKING LOT
LANDSCAPING of this Chapter.
5. Parking stalls and driving aisles shall be designed in accord with the
standards in Table 11-3C-1. Figure 11-3C-1 shows the parking design
dimensions.
6. All required parking as determined in Section 11-3C-6 shall be designed
for standard vehicles, Compact stalls are discouraged, but may be used
for any parking above the number of required parking spaces.
7. All parking areas shall provide on-site turnarounds in accord with the
Meridian Fire Department standards for all off-street parking spaces and
loading facilities.
2
Chapter 3 Article C. OFF-STREET PARKING AND LOADING REQUIREMENTS
9/26/2005
8. The design of off-street parking areas shall not require moving any car to
gain access to a required parking space.
9. It is the responsibility of the applicant to ensure that the parking lot design
and sidewalk and/or access provisions meet all American with Disabilities
Act (ADA) requirements.
TABLE 11-3C-1: REQUIRED STALL WIDTH AND LENGTH BY PARKING ANGLE
ONE ""WA¥ DRIVE .
..:AISLS** .
12'-0"
13'-0"
O' (parallel)
45"
60"
90"
10'-0"
9'-0"
17'-0"
25'-0"
9'-0"
FIGURE 11-3C-1: PARKING SPACE AND DRIVE AISLE DESIGN
LEGEND
A: Parking Angle
B: Stall Width
C: Stall Depth
D: One-Way Drive Aisle
E: Two.Way Drive Aisle
E
T
8
.J:.
Angled Parking
One-Way Drive Aisle
90 Degree Parking
Two-Way Drive Aisle
0 Degree Parking
One-Way Drive Aisle
3
Chapter 3 Article c, OFF-STREET PARKING AND LOADING REQUIREMENTS
9/26/2005
B,
Improvements,
1. Except as otherwise provided in this Section, all off-street parking areas
and driveways into and through a parking area shall be improved with a
compacted gravel base, not less than four inches (4") thick, surfaced with
dustless material, including but not limited to, asphalt, concrete, pavers,
bricks, or recycled asphalt. This standard shall not apply to temporary
uses,
2, All parking and loading areas shall provide proper drainage of surface
water to prevent the drainage of such water onto adjacent properties or
walkways,
3, Except as otherwise provided in this Section, all off-street parking areas
shall be provided with a substantial wheel restraint to prevent cars from
encroaching upon abutting private and public property or overhanging
beyond the designated parking stall dimensions, This standard shall not
apply to temporary uses,
4, When a bumper overhangs onto a sidewalk or landscape area, the
parking stall dimensions may be reduced two feet (2') in length if two feet
(2') is added to the width of the sidewalk or landscaped area planted in
ground cover,
5, Parking spaces and access lanes shall be marked, including handicapped
symbols and signs,
6. All lighting provided to illuminate a parking area shall comply with the
lighting standards provided in Article A. STANDARD REGULATIONS IN ALL
DISTRICTS of this Chapter.
7, All landscaping improvements shall comply with Article B, LANDSCAPING
REQUIREMENTS of this Chapter,
c.
Bicycle parking facilities shall meet the following location and design
standards:
1. Bicycle parking facilities shall be located as close as possible to the
building entrance(s),
2, Bicycle parking facilities shall not obstruct pedestrian walkways, public
sidewalks, or building entrances.
3, It is the responsibility of the applicant to ensure that the bicycle parking
facilities meet all American with Disabilities Act (ADA) requirements,
4, Bicycle parking facilities shall support the bicycle and allow the owner to
lock the frame and front wheel with one lock.
4
Chapter 3 Article C. OFF-STREET PARKING AND LOADING REQUIREMENTS
9/26/2005
D.
The Director may approve, or recommend approval of, an alternative off-
street parking and loading plan, through the Alternative Compliance process
when the overall design, as proposed by the applicant, meets or exceeds
the intent and the requirements of this Article and shall not be detrimental to
the public health, safety, and welfare. Mitigating circumstances might
include, but not be limited to access to, an adequate public transit system
and/or an unusually low parking demand.
11-3C-6:
REQUIRED NUMBER OF OFF-STREET PARKING SPACES:
A.
The minimum number of required off-street vehicle parking spaces for
residential uses shall be in accord with Table 11-3C-2.
TABLE 11-3C-2: REQUIRED PARKING SPACES FOR RESIDENTIAL USE
Dwelling, single-family detached
12 per dwelling unit,-4 in enclosed garage with a 10' x 20' parking pad
between access and garage2
2 per dwelling unit in an enclosed garage with a 20' x 20' parking pad
between access and ara e2
2 per dwelling unit in an enclosed garage with a 20' x 20' parking pad
between access and ara e2
Dwelling, townhouse
1 bedroom
more than 1 bedroom
12 per dwelling unit.+-in enclosed garage with a 10' x 20' parking pad
between access and garage2
2 per dwelling unit in an enclosed garage with a 20' x 20' parking pad
between access and ara e2
Dwelling, two-family duplex
1 bedroom
more than 1 bedroom
;',
8,
The following standards shall apply for off-street vehicle parking for
nonresidential uses: In all Commercial Districts and Traditional Neigh-
borhood Districts the requirement shall be one (1) space for every five
hundred (500) square feet of gross floor area. In all Industrial District the
requirement shall be one (1) space for every two thousand (2,000) square
feet of gross floor area. In circumstances where there would appear to be a
public safety issue, the Director may request additional information from the
5
Chapter 3 Article C. OFF-STREET PARKING AND LOADING REQUIREMENTS
9/26/2005
applicant to determine if there is sufficient parking. When in the
determination of the Director there is insufficient parking, the applicant shall
provide alternatives to on-site parking as set forth in Section 11-3C- 7 of this
Title, The determination by the Director shall be based on the following
criteria:
1. The specific use(s) proposed and/or on the property;
2, Uses in the vicinity of the property;
3, A traffic study, if prepared, forecasting the expected traffic and parking
needs expected from the use(s);
4, The availability of on-street, shared, and/or public parking within the
vicinity of the use; and/or
5. The availability of public transit, van pooling or other alternative
transportation to serve the use,
C.
Upon any change of use, the number of vehicle parking spaces to be
provided shall be calculated according to the requirements of this Article for
the new use,
D,
It is the responsibility of the applicant to ensure that the size and number of
handicap accessible spaces meets all American with Disabilities Act (ADA)
requirements.
E.
The required vehicle parking spaces shall be provided and continuously
maintained.
F.
No required parking area or space provided, as required by this Article, shall
later be eliminated, reduced, or converted in any manner unless other
equivalent facilities approved by the Director are provided.
G.
One (1) bicycle parking space shall be provided for every twenty-five (25)
vehicle parking spaces, except for single family residences, two-family
duplex, and townhouses,
11-3C-7: STANDARDS FOR ALTERNATIVES TO ON-SITE PARKING:
Alternatives to providing on-site parking as set forth in this Section are encouraged
in all developments, When required to meet minimum parking standards of Section
11-3C-6B, alternatives shall include but not limited to, shared-use facilities, access
to transit and availability of other forms of transportation such as carpool and van
pools,
A.
6
Conditions favorable to providing alternatives to on-site parking are as
follows:
Chapter 3 Article C. OFF-STREET PARKING AND LOADING REQUIREMENTS
9/26/2005
1, Shared use:
a. There are convenient pedestrian connections between separate
properties;
b, The properties and/or uses are within 1,000 feet of each other;
c. The principal operating hours of the uses are not in substantial conflict
with one another; and
d, Directional signs provide notice of the availability of parking,
2. Alternative transportation:
a, There is a transit stop within X mile of the use; or
b. There is an incentive program for carpooling, van pooling, or transit
supported by the employer,
8,
Where alternative modes of transportation are available, on-site parking may
be reduced by an equivalent amount to the demand that is met by the
alternative transportation mode, as documented in a transportation plan
prepared by a registered engineer,
C.
Agreement:
1. All parties involved with the shared-use parking area shall submit a written
agreement to the Director, signed by the applicable parties involved, The
agreement shall specify the following:
a, Party or parties responsible for construction; and
b. Party or parties responsible for maintenance,
2, The applicant or owner shall record such agreement with the Ada County
Recorder prior to issuance of any permits.
3, The shared-use parking agreement may be terminated by the parties only
if off-street parking is provided in conformance with this Article and
approved by the Director prior to the termination.
7
Chapter 3 Article C. OFF-STREET PARKING AND LOADING REQUIREMENTS
8
9/26/2005
11-3C-8:
OFF-STREET LOADING SPACE REQUIREMENTS:
A.
Off-street loading spaces for commercial and industrial uses shall be
provided in accord with Table 8-4G-3.
TABLE 8-4G-3: REQUIRED LOADING SPACES BY GROSS FLOOR AREA
. ~.f1,
0 to 36,000
36,001 to 100,000
Each additional 75,000 or fraction thereof
B.
Type A spaces shall be not less than 12 feet in width and 35 feet in length.
Type B spaces shall be not less than 15 feet in width and 65 feet in length,
All spaces shall have 14 feet of vertical clearance,
C.
Parking and loading areas shall be designed so vehicles shall not back out
into the street.
0,
No off-street loading space shall be located closer than fifty feet (50') to an
abutting rural or residential district unless wholly enclosed within a sound
attenuating structure, such as masonry block, No off-street loading space
shall face an abutting residential district.
E.
Any off-street loading space located within fifty feet (50') feet of a residential
district shall not operate between the hours of 10:00 p.m. and 7:00 a,m,
Chapter 3 Article C, OFF-STREET PARKING AND LOADING REQUIREMENTS
1
ARTICLE D.
11-30-1 :
11-30-2:
11-30-3:
11-30-4:
11-30-5:
11-30-6:
11-30-7:
11-30-8:
11-30-9:
11-30-10
11-30-1 :
A.
9/26/2005
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE D. SIGN REQUIREMENTS
SECTIONS:
PURPOSE
APPLICABILITY
PROHIBITED SIGNS
PROCESS
GENERAL STANDARDS
STANDARDS FOR TEMPORARY SIGNS
STANDARDS FOR PERMANENT SIGNS ALLOWED WITHOUT A PERMIT
STANDARDS FOR PERMANENT SIGNS ALLOWED WITH A PERMIT
PLANNED SIGN PROGRAM
STANDARDS BY ZONING DISTRICT:
PURPOSE: The regulations of this Article are intended to:
Require architectural and aesthetic harmony for signs as they relate to
building design and surrounding landscaping.
B,
Regulate sign size, height, and quality of signs, which will allow for good
visibility for the public and the needs of business while providing for the
health and safety of the public by minimizing distractions to motorists and
pedestrians,
c,
Regulate signs that will be compatible with the building, site conditions and
land uses the signs are intended to identify,
0,
Require the maintenance of existing signs and provide for a program of
bringing nonconforming signs into conformance with the standards of this
Article as changes are made to the sign or business.
E.
Set forth procedures that will facilitate the efficient processing of sign
applications,
F,
Establish design criteria that will promote attractive and effective signs for
Meridian residents, businesses, employees and visitors,
Chapter 3 Article D, SIGN REQUIREMENTS
9/26/2005
FIGURE 11-30-1: SIGN TYPES
Projecting
Parapet
Awning
1
F reestandi ng
Sign Background Area
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
11-30-2:
APPLICABILITY:
A.
Except as otherwise provided in this Chapter, it shall be unlawful for any
person to erect, construct, enlarge, move or convert any sign in the City, or
cause the same to be done, without first obtaining a sign permit through the
Planning and the Building departments, A permit shall not be required for a
change of copy on any sign, nor for the repainting, cleaning or other normal
maintenance or repair of a sign or sign structure for which a permit has
previously been issued in accord with this Code, provided that the sign or
sign structure is not altered in any way, See Figure 11-30-1 (previous page)
for an illustration of common sign types.
B,
Super Graphics: Super graphics, as defined in Chapter 1, Article A
definitions of this Title are not regulated by this Code,
C,
Classification and Status of Existing Signs: Signs in existence prior to
February 6, 2001, will fall under one of the three (3) following classifications
and be subject to procedures and actions as described:
1. Conforming: A sign that conforms to the requirements of this Article,
These signs may remain and continue to be governed according to this
Article,
2. Nonconforming:
a. Any sign that does not conform to the requirements of this Article, but
which was legally erected in either of the following circumstances:
i.
a valid permit was issued for the sign prior to the adoption of this
Code; or
ii. the sign required no permit but was a legal sign prior to the adoption
of this Code,
b. No temporary sign, prohibited sign, or sign for an illegal use shall be
eligible for "nonconforming" status.
c, A nonconforming sign shall lose its nonconforming status if:
i.
There is a change of background area constituting fifty percent
(50%) or more of the total existing sign background area;
ii. The sign is moved to a position that violates this Article; or
iii. The sign cabinet or supporting structure is replaced; or
1
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
iv, A new or additional sign, including reader boards, is provided for the
business using the nonconforming sign; or
v. There is a change in the use of the property on which the sign is
located; or
vi. There are alterations or enlargements to the site or building on the
property in excess of twenty-five percent (25%) or more of the
existing site or building. The amount of alterations shall be
cumulative over time; or
vii. The legal nonconforming sign has been damaged to the extent of
more than fifty percent (50%) of its reproduction value.
viii. The sign is abandoned; see Section 11-30-5 of this Article.
d. Upon occurrence of any of the above events, a nonconforming sign shall
lose its legal status. Thereafter, the sign owner shall remove the sign
within sixty (60) days, unless he/she is able to bring it into compliance
with this Code,
3, Illegal: Any sign that does not conform to the requirements of this Article
and for which a permit was never legally issued and that cannot meet the
requirements of a legal nonconforming sign, Illegal signs will be enforced
under the provisions of Sections 11-30-10 and 11-30-11 of this Article.
o.
Public hearing notice signs as required by Section 11-5A-50 of this Title
shall be exempt from the provisions of this Article,
11-30-3:
all districts:
PROHIBITED SIGNS: The following types of signs are prohibited in
A.
Private signs within public right-of-way or upon city-owned property. (This
does not prohibit the Transportation Authority or City from placing signs on
the property,)
B.
Pennants, strings of lights, ribbons, streamers, spinners, twirlers or
propellers, balloons, bubble machines and similar devices of a carnival
nature.
c,
Signs which because of color, wording, design, size, movement, location or
illumination resemble or conflict with any traffic-control device or with the
safe and efficient flow of traffic.
D.
Signs that emit any sound, odor or visible matter,
E.
Abandoned nonconforming Signs, (See Section 11-3D-5,A)
2
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
F.
Roof signs.
G.
The parking of any idle vehicle or trailer on any property for more than 72
hours, any part of which is located within 35 feet of a public right-of-way, and
which has affixed to it a sign which is intended to attract or direct customers
to a business which is on or near the property. This prohibition is not
intended to apply to a fleet vehicle(s) which leaves the premises during the
hours of the business operation,
H,
Strobe, revolving or flashing lights,
I.
Reader boards in all residential districts, except as approved through the
Conditional Use Permit process for nonresidential uses,
J.
Off-premise signs, except as permitted in Sections 11-3D-6C1, 11-3D-8G,
and 11-3D-9.
K.
Signs for illegal uses,
11-3D-4:
PROCESS:
A.
Application for sign permit:
1, An application and fees, in accord with Chapter 5 ADMINISTRATION of this
Title, shall be submitted to the Director on forms provided by the Planning
Department.
2, The application shall contain such information as may be required by the
Building Code in accord with Title 7 of the Meridian City Municipal Code
and all appropriate regulations of the City,
3. Fees for sign permit applications shall be paid to the Building Department
at the time of sign permit issuance, Fees for temporary signs requiring
permits shall be paid to the Planning Department.
B.
Effect of issuance: No permit for a sign issued hereunder shall be deemed
to constitute permission or authorization to maintain an unlawful sign nor
shall any permit issued hereunder constitute a defense in an action to abate
an unlawful sign,
C,
Inspection markings:
1, All permanent signs regulated by this Article shall be marked with the sign
permit number. This marking shall be permanently placed on the exterior
face of the sign or the support structure in a location where the information
will be readily visible, legible, and accessible for inspection after
installation and erection,
3
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
2, All temporary signs regulated by this Article shall attach the permit issued
by the Planning Department to the temporary sign in a visible manner and
accessible for inspection.
0,
Inspection, The Director and/or Building Inspector are hereby empowered to
enter or inspect, upon notification of the property owner or manager, any
building, structure or premises in the City on which or in connection with
which a sign is located, for the purpose of inspection of the sign, its
structural and electrical connections, and to ensure compliance with the
provisions of this Code, Such inspections shall be carried out during
business hours, unless an emergency exists,
E.
Maintenance, The Director shall have the authority to order the repair or
structural alteration for safety of signs that present a hazard to the public,
F,
Signs declared hazardous: Upon finding that any sign endangers public
safety by reason of inadequate maintenance, dilapidation or abandonment,
the Director may declare the sign hazardous. The Director shall send the
owner written notice that the sign has been declared hazardous, specifying
the reasons why the sign endangers public safety, and order that the sign be
repaired or removed by the owner within thirty (30) days, If a sign
determined to be hazardous presents an immediate and serious danger to
the public, it may be immediately removed by the City without prior notice
and the removal costs charged to the owner.
G,
Time limitations: Every sign permit issued by the City shall become null and
void if erection or construction on-site is not commenced within one (1) year
from the date the permit was issued, If work authorized by such permit is
suspended or abandoned for one year any time after the work is
commenced, a new permit shall be obtained
11-30-5: GENERAL STANDARDS: The following requirements shall apply to
signs in all districts:
A.
Abandoned nonconforming signs: Except as otherwise provided in this
Code, any sign located on property that pertains to a time, event, business,
or purpose which no longer applies to that property and has been
continuously vacant for a period exceeding six (6) months shall be deemed
as abandoned. A nonconforming abandoned sign is prohibited and shall be
immediately removed upon notice by the City or brought into full compliance
by the owner of the sign or owner of the property.
B,
Abandoned conforming signs: Except as otherwise provided in this Code,
any sign located on property that pertains to a time, event, business, or
purpose which no longer applies to that property and has been continuously
vacant for a period exceeding six (6) months shall be deemed as
abandoned, Conforming abandoned sign structures may remain, However,
the business name panels shall be removed immediately, Such signs shall
be maintained in an aesthetically pleasing manner according to the
4
Chapter 3 Article 0, SIGN REQUIREMENTS
9/26/2005
standards in Paragraph C of this section,
c,
Sign Maintenance and Repair:
1, All signs shall be continually maintained in a state of good appearance,
security, safety and repair throughout their life. Nothing in this code shall
relieve the owner or user of any sign or owner of property on which a sign
is located from maintaining the sign in a safe condition and in a state of
good repair,
2. Maintenance requirements include, but are not limited to, the following
sitl,lations:
a, Any metal pole covers and sign cabinets shall be kept free of rust and
rust stains;
b. Any internally illuminated sign cabinets or sign panels that have been
damaged shall remain unilluminated until repaired;
c, All abandoned signs shall either install blank opaque panels or reverse
the existing panels to avoid exposing any internal illumination;
d. Any signage that has been damaged to such extent that they may pose
a hazard to passersby shall be repaired or removed immediately,
D,
Blanketing of signs: No freestanding permanent sign shall be erected in the
same horizontal plane with other signs unless spaced at least twenty-five
feet (25') apart.
E.
Signs adjacent to residential districts:
1, Any freestanding sign located on a commercial or industrial property that
is adjacent to a residential district and shares the same street frontage
shall be set back to meet the front setback requirements of the adjoining
residential district.
2. No sign background or area facing the side or rear property line of an
abutting residential district shall be located within fifty feet (50') of such
side or rear property line,
3, Animated signs and/or signs using direct lighting shall be prohibited within
one hundred feet (100') of any residential district. Distance shall refer to
the linear measurement in either direction on the street to which the sign
faces only,
4, No sign shall be designed or located such that more than one-half (Y2)
foot-candle of light fall occurs at ground level at the property line of a
residential district.
5
Chapter 3 Article 0, SIGN REQUIREMENTS
9/26/2005
F.
Clear vision triangles: Signs shall not be permitted in the clear vision triangle
as set forth in Section 11-3A-5 clear vision triangle of this Title.
G,
Street-ground elevation differences: If a street elevation to which the sign is
oriented is more than the grade elevation at the base of the sign structure,
then the street elevation shall be used in determining the permitted height of
signs erected upon the ground. This provision shall apply only to
freestanding signs.
H,
Utility power lines:
1. Signs shall be located in such a way that they maintain horizontal and
vertical clearance of all overhead electrical conductors in accord with
National Electric Safety Code specifications, as reviewed and determined
by the local power company,
2. Applicants are required to contact the local electric company before
erecting a sign nearer than twenty-five feet (25') of electric power lines,
3, No sign shall be placed within a power line easement without approval of
the holder of such easement.
I.
Design:
1. Sign supports: The intent of this Section is to prohibit bare pylons and/or
mono poles, except in the 1-84 Overlay and Freeway Interchange Overlay
for signs over thirty-five feet (35') in height. All other pole support
structures shall be constructed with pole covers that meet the following
standards:
a, Covering shall be designed to fully enclose the pole(s).
b, Paint or wraps shall not be permitted types of covering, Vinyl or similar
materials that complement the sign background area may be allowed on
sign supports for sign ten feet (10') or less in height when such covering
meets or exceeds the intent of this Section, as determined by the
Director,
c, Special decorative elements such as sculptured metal, wrought iron or
other aesthetically pleasing materials that are incorporated into the
support structure design and do not fully enclose the structure may be
allowed, as determined by the Director when they meet or exceed the
intent of this Section,
2, Signs shall incorporate design and building materials that complement the
architectural theme of the building for which the sign identifies, For
permanent signs, architectural appurtenances or other decorative
6
Chapter 3 Article 0, SIGN REQUIREMENTS
9/26/2005
elements that do not contain copy are allowed up to a maximum of fifteen
percent (15%) of the district's allowable sign height.
J.
Landscape base requirement: All freestanding signs shall be set entirely
within a landscaped area having at least the same square footage as the
background area of the sign,
K.
Street address:
1, All freestanding signs, except as otherwise approved for residential
subdivisions, shall include the street address(es) of the subject property,
2, The placement of the street address on the sign shall be in addition to any
address required to be placed on the building, unless otherwise authorized
by the Meridian Fire Department.
3. Numbering shall be a minimum of three and one-half inches (3.5") tall and
be of a contrasting color. Along arterial streets, numbering shall be a
minimum of six inches (6") tall and be of a contrasting color, with the
following exception: because of the reduced travel speeds and close
proximity of the structures within the 0- T District, such properties shall be
exempt from the larger numbering size.
4, Street addresses shall not be included in the calculation for sign
background area, except for those portions that exceed five (5) square
feet.
5, On multitenant signs, addresses shall be included with the planned sign
program application.
6, Signs that identify multiple buildings and/or addresses may provide a
range of addresses,
11-30-6:
STANDARDS FOR TEMPORARY SIGNS:
A.
General standards for all temporary signs:
1. Where applicable, temporary signs shall be removed upon expiration of
the allowed or permitted display period,
2, All temporary signs shall be securely fastened to the ground or to a
permanent structure, or the temporary sign shall be mounted upon a
permitted device, Signs shall be erected in a manner that does not create
a potential hazard of any kind, The attachment line and balloon (or other
sign) shall not exceed eighty percent (80%) of the horizontal distance to
the nearest overhead power line. For example, an inflatable sign with a
forty-foot (40') lead must be at least fifty feet (50'), (40' x 80%) from any
power line, measured in a horizontal distance,
7
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
3, No temporary sign shall be internally or externally illuminated,
4. No temporary sign shall be located within a public right-of-way, except as
permitted under Section 11-3D-6,C and where the applicant has written
approval from the Transportation Authority,
5. All temporary signs shall be weatherproofed and kept in a state of good
appearance, safety, and repair, Any damaged or potentially hazardous
sign shall be repaired or removed immediately.
6. The following additional standards shall apply to temporary signs that
require a permit as set forth in the Section 11-3D-6C of this Article.
a, A temporary sign permit may be obtained through the Planning
Department for fifteen (15), thirty (30), sixty (60), or ninety (90) day time
periods,
ix, In no instance shall a temporary sign requiring a permit be
displayed for more than ninety (90) days per year per business.
x. A permit must be obtained for every new temporary sign to be
displayed,
xi. If a permitted sign is removed for any portion of the permitted
time period, the time shall be forfeited and shall not accrue or be
added to the allowable display period for a temporary sign. For
example, if a business owner obtains a permit for ninety (90)
days for a banner sign, that would be the only temporary sign
allowed that year, Even if that business owner were to remove
the banner sign after thirty (30) days, that business would not be
eligible for an additional sixty (60) days of display time for a
temporary sign,
b. The temporary sign permit shall be attached to the approved sign so that
it is visible from the nearest public right-of-way,
c, All signs to be placed on private property shall obtain the written consent
of the property owner and file that consent with the Planning Department
prior to issuance of a permit.
8
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
B.
Temporary Signs Not Requiring a Permit: The temporary signs listed below
do not require a permit, provided that the construction, placement and use of
the temporary signs are in conformance with all applicable standards of this
Article.
1, Construction signs shall be allowed, provided that such signs are erected
no more than thirty (30) days prior to the beginning of construction for
which a valid building permit has been issued, are confined to the site of
construction, and are removed five (5) days after completion of
construction and prior to occupancy, Construction sign shall be a
maximum of thirty-two (32) square-feet in area, unless legally required by
a governmental contract to be larger, (See Tables 11-30-1 through 11-30-
9 for other standards related to constriction signs,)
2. Holiday decoration signs are allowed, provided that such signs are erected
no more than thirty (30) days prior to the official holiday and are removed
five (5) days after said holiday, Such decorations shall comply with the
standards in Section 11-3D-6.A.
3, Temporary sign in residential districts are allowed, provided that such
signs are no more than six (6) square feet in area and no more than one
(1) temporary sign is displayed per property, If the sign pertains to an
event, the sign shall be removed within five (5) days after said event.
Events shall include, but not be limited to an election, home sale, garage
sale, seasonal event, birth announcement and similar events associated
with a residential district.
4, Temporary window signs are allowed in nonresidential districts, provided
that the temporary signs shall not exceed twenty five percent (25%) of the
window area, and the combined total copy are of temporary and
permanent window signs shall not exceed twenty five percent (25%) of the
total window area per building elevation.
5. Handheld signs are allowed.
C.
Temporary signs requiring a permit: The following signs may be allowed
upon issuance of a permit from the Planning Department.
1. Street Banners stretched over public property that pertain to civic affairs
and that meet the following standards:
a. The Director shall determine that the banner pertains to a civic affair,
b, No banner shall be allowed over public property for a longer period than
fourteen (14) days.
c, A substantial rope at least one inch (1 ") in diameter shall be used as the
main support for banners and two and one-half inches (2W') ropes shall
be used for securing each lower corner. The banner shall have sufficient
9
Chapter 3 Article D, SIGN REQUIREMENTS
9/26/2005
wind holes, Wire cable, metallic rope or other material capable of
conducting electricity shall not be used to secure the banner.
2. Searchlights that meet the following standards:
a, The searchlight is used by a business once annually for a maximum
period of seven (7) consecutive days, or for purposes of the grand
opening of a new business or a business under new management for a
maximum period of seven (7) consecutive days,
b. In no case shall the beam of the searchlight flash against any building or
sweep an arc greater than forty-five (45) degrees from vertical.
3, Balloons and other inflated devices and other temporary signs that exceed
the freestanding sign height allowances for the district, provided that such
balloons, devices and signs meet the following standards:
a. No more than one (1) such sign or device is allowed per business per
year.
b. The sign or device is securely fastened to a permanent structure or
device.
c. No mylar, electricity or other power-conducting material is used in the
construction of the sign or device,
d, The sign or device is no greater than one and one-half (1 Y2) times the
maximum building height within the district.
4, Temporary sign in nonresidential districts that meet the following
standards:
a, A maximum of one (1) such sign shall be displayed per business at any
one time and a maximum of three (3) such signs per property.
b. The background area for temporary banner signs shall not exceed five
percent (5%) of the wall area on which the banner is fastened or three
percent (3%) if the same wall has a permanent wall sign,
c, The background area for all other temporary signs shall not exceed
sixteen (16) square feet.
d. The sign(s) shall not be attached to the support structure of a
freestanding sign, and shall comply with the permanent sign setback
requirements,
5, Temporary off-premise sign that meets the following standards:
10
Chapter 3 Article 0, SIGN REQUIREMENTS
I.
j,
11
9/26/2005
a. A maximum of one (1) such sign per property shall be displayed at
anyone time. The sign shall be considered as a temporary sign and
shall be included in the application of Section 11-3D-6A6a.
b, The background area shall not exceed six (6) square feet.
c. The applicant shall provide the notarized consent of the property
owner.
11-30-7:
PERMIT:
STANDARDS FOR PERMANENT SIGNS ALLOWED WITHOUT A
A.
Directional or public service information signs. Directional signs shall be no
greater than four (4) square feet in area and no more than four feet (4') in
height. If business identification is used, then it shall be secondary in all
aspects to the primary use of these signs for directional purposes as
defined.
B.
Conventional flags, emblems or insignia of any national or political
subdivision or corporation.
C.
Governmental signs for the control of traffic or other regulatory purposes, or
signs of public service companies indicating danger, that are erected by or
on the order of a public officer in the performance of public duty,
0,
House numbers and name plates,
E.
Signs located within the interior of any building or structure that are not
visible from the public right-of-way,
F.
"No Trespassing" or "No Dumping" signs that do not exceed one-one-half
(1Y2) square feet in area per sign and that do not exceed one (1) per one-
hundred feet (100') of the perimeter of the property, Special permission may
be obtained from the Director for additional signs where hazardous or public
nuisance conditions exist.
G,
Memorial signs or tablets, names or buildings and date of erection that are
cut into masonry surface or inlaid so as to be part of the building,
H,
Occupant wall signs not to exceed one (1) for each dwelling unit indicating
the name of the occupant, or the location or identification of a home or
professional office except as limited by the district encompassing the use,
Plaques or nameplate signs of not more than two and one-half (2 Y2) square
feet in area that are fastened directly to a building,
Public signs required or specifically authorized for a public purpose by any
law, statute or ordinance, that may be of any type, number, area, height
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
above grade, location, illumination or animation as required by the law,
statute or ordinance under which the signs are erected,
K.
Historical signs or markers,
L.
Permanent window signs (where such signs are allowed), provided that
permanent signs shall not exceed twenty-five percent (25%) of the window
area, and the combined total copy area of temporary and permanent window
signs shall not exceed fifty percent (50%) of the total window area.
M,
Signs in the display windows of a business that are incorporated in a display
of merchandise and not attached to the window glass,
N,
Religious symbols, commemorative plaques of recognized historical
agencies, or identification emblems of religious orders or historical agencies,
provided that no such symbol plaque or identification emblem shall exceed
four (4) square feet in area, and provided further that all such symbols,
plaques and identification emblems shall be placed flat against a building.
o.
Signs warning the public of the existence of danger, of a size as may be
necessary to be removed upon subsidence of danger. Such signs shall not
contain advertising material.
p,
Any sign that is oriented only to the property on which it is located and is not
visible from the public right-or-way.
11-30-8: STANDARDS FOR PERMANENT SIGNS ALLOWED WITH A
PERMIT: The following regulations apply in correlation with the sign types listed in
Tables 11-30-1 through 11-30-9 in this Section.
A.
B,
C,
12
Rent, lease and sale Signs: the regulations in Sections 11-30-6.A.6 and 11-
30-6,A.10 shall also apply.
Construction signs: the regulations in Section 11-30-6,A.2 shall also apply.
Freestanding signs (Single Building): In addition to the provisions of Tables
11-30-1 through 11-30-9, the following standards shall apply to all
freestanding signs not part of a planned sign program:
1, Number allowed: No building occupied by a single tenant may be signed
with more than one (1) freestanding sign unless the sign is sited on a
second public street frontage of the lot, or approved as a directional sign,
For single tenants on property in excess ot ten (10) acres or more, the
Director may approve additional freestanding signs not exceeding four (4)
feet in height through the alternative compliance procedure in accord with
Chapter 5 ADMINISTRATION of this Title,
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
2, Maximum height and background area: The sign height and background
area shall be as provided in Tables 11-3D-1 through 11-30-9,
3, Setbacks and location: In all districts, no part of the sign, including the
footing, shall be located closer than five feet (5') from the side and rear
property lines, unless greater separation is required. In commercial and
industrial districts, no part of the sign, including the footing, shall be
located closer than one foot (1 ') from the front property line, In residential
and office districts, the setback shall be a minimum of five feet (5') from
the front property line, (See Sections 11-3D-5E and 11-3D-5F for other
setback requirements,)
4. Illumination: Signs may utilize direct, indirect or internal lighting, except
that the use of direct lighting in or adjacent to residential districts is
prohibited.
D.
Wall signs: In addition to the provisions of Tables 11-30-1 through 11-3D-9,
the following standards shall apply to all wall signs:
1, Area: For wall signs oriented to a public street, the sign shall not exceed
eighteen percent (18%) of wall area (up to a maximum of seventy-five (75)
square feet in office districts). For wall signs not oriented to a public street,
the sign shall not exceed nine percent (9%) of wall area, "Wall Area" shall
mean the wall surface of a single-tenant structure or the storefront of a
multitenant structure. When a combination of wall and freestanding signs
are used on a single site, the total area for wall signs oriented to a public
street shall be reduced by fifty percent (50%).
2, Height: No wall sign shall exceed the height of the wall face,
3, Number allowed: Each business with exterior frontage in office,
commercial or industrial districts or as otherwise approved as part of a
Planned Development shall be permitted wall signs, The combined area of
all signs on a single wall shall not exceed the allowable percentage.
4, Lighting; Direct illumination signs are prohibited, except that neon may be
permitted if contained within channel letters or raceways. Skeleton neon is
not permitted,
5, Animation, flashing lights, and revolving signs are prohibited as wall signs,
6, The design of the sign, including color scheme, shall be compatible with
the wall face. Illuminated wall signs shall be designed in accord with
Sections 11-3D and 3E. No illuminated wall sign shall be visible from any
adjacent residential structure,
E.
Projecting Signs:
13
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
1. Location: Projecting signs are prohibited in all districts except 0- T and TN-
C or as approved under a planned sign program,
2, Maximum background area: The maximum background area shall be five
percent (5%) of building face facing a local street within the Old Town
District, up to a maximum of fifteen (15) square feet; fifteen percent (15%)
in other districts where such signs are allowed. When both projecting and
wall signs are utilized, the allowable area for each sign type is to be
reduced by fifty percent (50%).
3, Projection above building height: No projecting sign shall ever project
above the building roof line,
4, Vertical clearance: The minimum clearance over public rights-of-way or
private walkways shall be eight feet (8').
5, Lighting: projecting signs shall have either direct or indirect lighting
sources.
6. Number allowed: Where permitted, no more than one (1) projecting sign
per business shall be allowed,
7, Projection from wall: Projecting signs shall have a maximum projection of
ten feet (10') or to within two feet (2') of the face of the curb, whichever is
less,
F,
General interest directional signs: Except as otherwise provided, sign
regulations governing erection of non-accessory directional signs at street
intersections and other appropriate locations by City of Meridian for direction
to places of general interest such as colleges, auditoriums, fairgrounds,
hospitals, airports, parks, playgrounds, and other places are to be treated as
public service information signs and regulated as such.
G,
Billboards:
1, Existing billboards may be allowed to relocate with a Conditional Use
Permit if the new site is approved based on the findings and criteria set
forth in Paragraphs 2 and 3 of this Section.
2, Existing off-premise signs of the billboard category may be replaced
structure for structure,
3, The Planning and Zoning Commission and City Council shall make all of
the following findings in permitting a billboard relocation:
a, That the location and placement of the sign will not endanger motorists
or pedestrians and does not interfere with the clear vision triangle at
street, railroad, or street-driveway intersections.
14
Chapter 3 Article 0, SIGN REQUIREMENTS
9/26/2005
b, That the sign will not cover or blanket any prominent view of a structure
or façade of historical or architectural significance.
c. That the sign will not obstruct views of users of adjacent buildings to side
yards, yards, or to nearby open space, This requirement does not
include views of distant vistas,
d, That the sign will not negatively impact the visual quality of a public open
space such as a recreation facility, square, plaza, courtyard and the like.
e, That the height of the sign is compatible with the heights of buildings in
the immediate area of three hundred feet (300') radius from sign, Where
the view of the sign is obstructed by a building or buildings on the same
or adjacent properties, or where the view to the business or businesses
located on the same or adjacent properties would be obstructed by the
placement of the sign, the height of the sign may not exceed the height
of the building on the same or adjacent property by more than twelve
feet (12'). For safety reasons the minimum clearance of a sign shall
never be less than eight feet (8'). Height of signs located in undeveloped
areas; an area where no buildings are within three hundred feet (300')
shall not exceed twenty-two feet (22') above grade.
f. That the sign's lighting will not cause hazardous or unsafe driving
conditions for motorists and will not glare, reflect, or spill onto adjacent
business or residential area,
H,
Reader boards:
1. Automatic
a. Animation and/or automatic reader boards are prohibited on all signs in
Residential, L-O, C-N, C-C, O-T, TN-C, and TN-R districts,
b, In C-G, I-L and I-H districts, animation is allowed for a maximum of thirty
percent (30%) of the sign background area,
c, Public middle school and high schools shall be allowed one (1) on-
premise animated sign where the animation is a maximum of thirty
percent (30%) of the sign background area, regardless of the zone in
which the school is located, The Director may approve an alternative off-
premise location where it provides better information to the community.
In no case shall more than one (1) animated sign be allowed.
d. Direct light sources shall not exceed forty (40) watts or sixty (60)
milliamps, No part of the sign structure shall physically move, No part of
the sign shall flash or strobe. Flashing and/or animated signs are
prohibited within one hundred feet (100') of any residential district.
15
Chapter 3 Article 0, SIGN REQUIREMENTS
9/26/2005
e. All animated signs that are visible from a public street shall be
programmed as follows:
i. Text messages that are longer than the display area and do not
contain any graphics shall scroll in a consistent and predictable
manner,
ii. In all other displays, including but not limited to graphics, letters
and/or numbers, each display shall remain unchanged for a minimum
of five (5) seconds, including unchanged color and brightness.
2. Manual reader boards are allowed for a maximum of fifty percent (50%) of
the sign background area.
I.
Subdivision Identification Signs: In addition to the provisions of Tables 11-
30-1 through 11-30-9, the following standards shall apply to all subdivision
identification signs:
1. Within the R2, R4, RB, and TN-R Districts:
a. Two (2) subdivision identification signs are allowed per entrance only if
the subdivision entrances are a minimum of 1,320 feet apart and signs
are on different sides of the entrance,
b, If the subdivision entrances are less than 1,320 feet apart, as measured
from centerline to centerline, then only one (1) subdivision identification
sign is allowed per entrance,
c. Subdivision identification signs located within medians shall be a
minimum of 20 feet back from the right-of-way line of the perpendicular
street.
2, Where a center sign is on the same street frontage as the subdivision
identification sign, the background area of the existing center sign shall be
subtracted from the allowable background area for the subdivision
identification sign,
3. Subdivision identification signs shall only identify the subdivision or
development name. Such signs shall not identify any businesses, tenant,
or developer names.
11-30-9: PLANNED SIGN PROGRAM: In addition to the provisions of Tables
11-30-1 through 11-30-9, the following standards shall apply to all signs within a
planned sign program:
A.
Purpose: The purpose of a planned sign program is to establish consistent
sign criteria tailored to multibuilding and/or multitenant developments. The
intent is to provide for flexible sign criteria that promotes superior design
16
Chapter 3 Article 0, SIGN REQUIREMENTS
9/26/2005
through architectural integration of the site, buildings and signs. If approved,
a planned sign program may allow for increases to the background area,
height, and other standards for wall signs,
ß,
Applicability:
1. All developments in commercial, office or industrial districts comprising
more than one (1) principal building on a property shall apply for a planned
sign program,
2. All developments in commercial, office or industrial districts with more than
one (1) tenant per building and proposing more than one wall sign per
elevation shall apply for a planned sign program,
3, Existing developments that do not have a planned sign program shall be
required to apply for a planned sign program when the first tenant in the
project requests a change of sign background area as defined in this
Article. Thereafter, all subsequent changes of sign face in the project shall
be required to conform to the approved planned sign program.
4. Planned sign programs may not be used by individual buildings or
developments to increase the size, dimensional, or other standards of the
district.
c,
Process:
1, The planned sign program shall be filed with the Director and shall specify
standards for consistency among all signs within the development.
2. The approval of a planned sign program shall be required prior to issuance
of a building permit.
3, The installation of any sign may occur only after a planned sign program
has been submitted, reviewed and approved by the Director.
4. Thereafter, a sign that conforms to the approved planned sign program
may be permitted by the Director.
5. Approval of a planned sign program does not waive the permit
requirements for individual signs, In cases of existing sites that have no
approved planned sign program, all signs shall be regulated in
conformance with all other sections of this Title until such time as a
planned sign program is submitted, reviewed and approved,
D,
Standards:
1, Signs shall incorporate materials, colors and a design motif that is
compatible with and complements the architectural theme and style of the
17
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
building or complex for which the sign identifies. Sign designs shall reflect
a common theme and incorporate similar design elements in terms of
materials, letter style, illumination, sign type and sign shape,
2. One (1) primary freestanding sign, hereinafter referred to as center sign,
shall be allowed per the subject area of the planned sign program unless
otherwise restricted by Section 11-30-81, Subdivision Identification Signs.
One additional center sign shall be allowed per one thousand feet (1,000')
of street frontage or any portion thereof, The one-thousand feet (1,000')
shall be cumulative for corner lots, For example, a corner lot with four
hundred feet (400') of frontage on one street and five hundred feet (SOD')
of frontage on a second street shall only be allowed one (1) enter sign
because the combined total street frontage is less than one thousand feet
(1,000').
a. In addition to the center sign, one (1) secondary freestanding sign for
each building within the development is permitted, with size and
background area in accord with Tables 11-30-1 through 11-30-9,
provided that no sign exceeds a height of ten feet (10') and background
area of seventy (70) square feet.
b, Where there is a subdivision identification sign on the same street
frontage as the center sign, the background area of the subdivision
identification sign shall be subtracted from the allowable background
area for the center sign,
3, Wall signs are permitted in any number, location, or orientation, except
toward an adjoining residential property, provided that the total square
footage does not exceed eighteen percent (18%) of the wall face upon
which the sign is placed, or nine percent (9%) of the wall if combined with
a freestanding sign on the same lot.
4. Sign height and placement shall be consistent throughout the
development site,
5. After approval of a planned sign program, no signs shall be constructed
except in conformance with such plan. Upon approval, the sign program
shall apply to all existing and future tenants, This planned sign program
shall be included in the lease for each individual tenant. Proof of said
inclusions shall be submitted to the Planning Department by the property
owner,
11-30-10:
SIGN STANDARDS BY DISTRICT:
A.
Signs shall conform to the dimension, location, and other standards
specified in Tables 11-30-1 through 11-30-9.
B.
Allowable sign size exchange for corner property in all districts: In all
districts, land abutting more than one public street shall be allowed its quota
18
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
of signs on each street and up to twenty percent (20%) of the permitted sign
size quota on any street may be deducted there from and added to the
second street frontage.
C,
1-84 sign overlay: There shall be an 1-84 Sign Overlay located within an area
three hundred feet (300') from and parallel to the right-of-way line of 1-84 on
both the north and south sides of the interstate, Freestanding signs and wall
signs within the 1-84 sign overlay shall comply with the following standards:
1, Wall signs; See Table 11-30-7 for specific standards. Only one (1) wall
sign oriented to 1-84 shall be allowed per business, or per tenant in a
building that is occupied by two or more tenants, However, not more than
two (2) freeway-oriented wall signs shall be allowed on any single building
or structure,
2. Maximum freestanding sign height: A freestanding sign located within the
1-84 sign overlay shall not exceed forty (40) feet in height.
3, Maximum background area: A freestanding sign located within the 1-84
sign overlay shall be one (1) square foot of sign area per linear foot of
freeway frontage up to a maximum of on-hundred fifty (150) square feet
for single building signs and three hundred (300) square feet for center
signs,
4, Spacing: The minimum distance between freestanding signs within the 1-
84 sign overlay is five hundred feet (500'),
5. Subdivision identification signs oriented to the freeway are permitted within
the 1-84 sign overlay, but the sign support shall be designed with a
foundation, pedestal or other non-pole design structure and be compatible
with the residential subdivision,
o.
Freeway interchange sign overlay: A Freeway Interchange sign overlay shall
be established by this Article, Figures 11-30-2 and 11-30-3 graphically
depict the overlay boundaries. The intent of this overlay is to allow
businesses located near an 1-84 interchange the option of increased sign
visibility and height. Freestanding signs and wall signs within the Freeway
Interchange Sign Overlay shall comply with the following standards:
1. Wall Signs; All wall signs on buildings with 1-84 frontage shall comply with
the standards set forth in Section 11-30-9,C,1. All other wall signs shall
comply with the standards set forth in Section 11-30-8E.
2. Maximum Freestanding Sign Height: A freestanding sign located within the
Freeway Interchange Sign Overlay shall not exceed forty feet (40') in
height.
3, Maximum Background Area: A freestanding sign located within the
Freeway Interchange Sign Overlay shall be allowed a sign background
19
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
area no greater than one hundred twenty (120) square feet for a single
building and three hundred (300) square feet for a center sign.
4. Location: All freestanding signs using the increased sign height allowed by
the overlay shall be entirely located within the freeway interchange sign
overlay boundaries, If only a portion of a property falls within the overlay
boundary, the sign shall be located within said portion in compliance with
all other setback requirements of this Title. If the sign cannot comply with
other setback requirements, the sign shall meet the sign standards for the
base district.
5. Spacing: The minimum distance between freestanding signs within the
freeway interchange sign overlay is forty (40') feet.
20
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
TABLE 11-30-1 STANDARDS IN THE R-2, R-4, R-BAND TN-R DISTRICTS
Rent, Lease &
Sale Signs
Home
Occupations
Wall & Window
Signs
Freestanding
8 sq. ft.
No
higher
than eave
None
1 per Jot
None
N
CUP required (Maximum 16 sq. ft. in any zone)
y
Construction
32 sq. ft.
per sign
6 ft. 15ft. from I None I Max. 3 signs per
property line lot
I tor greater
6 ft. 5 ft, from any Indirect or Internal 2 per each
property line. entrance
Positioned at to the
the subdivision subdivision1.2.
entrance
N
Subdivision
Identification
50 sq. ft.
y
All Other Signs I Prohibited
) TW912) $@'1VÍjf~Otfä~~wèd;pérèh\râl1Ce ~~1í1fïg~lonentrances 1Ù& å1UWrnum of1 ~ feet~aM sìgo&:åiAÍf~sWesof ~;+~J ~¡;=~,
~enifiince. tfthe Su~bdMSion errtràncésilre lešs than 1 ;320 feet'apart, as measur~~ffomcenterlinefu èen!èffine, îI1en amy one (1) subiji\íiskm iden~oit'srQnis allowed peT '.
~.emrance. ---."","" '" ' '. ':::;c::i..~';."~'" .,.
2SUbdMsioniden1ification siQns located within medians shaft be a minimum of 20 feet back from the right-of-:.way line of the per.e.endiculár street. .
21
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
TABLES11-3C-2 STANDARDS IN THE R-15 AND R-40 DISTRICTS
Sf~. ,..MAX.- .;- ~m..:. è~~~..:~.~~-W) PERMIT
"-"'~,':- ~.~;~ ,"'..... .',.. REQUIRED
....
-
Rent, Lease & Sale 6 ft. None 1 per lot -- -- N
Signs
Home Occupations No None 1 per lot None -- N
Wall & Window 8 sq. ft. higher
Signs than eave
B. Freestanding
Prohibited
Construction 32 sq. ft. 6 ft. 5 ft. from None Max, three -- -- N
per sign property line signs per site
or reater
Subdivision 32 sq. ft. 6 ft, 5 ft, from any Indirect or 1 at each -- -- y
Identification property line, Internal entrance
Positioned at the to the complex
subdivision or subdivision
entrance
All Other Si ns Prohibited
22
Chapter 3 Article D. SIGN REQUIREMENTS
Freestanding
(Single bldg.)
Center Signs2
See Section 11-
30-9
Wall Signs1
Canopy Signs
Under Canopy
Awning Signs
Rent, Lease &
Sare Signs
Construction
Subdivision
Identification2
-Jf';~IJM .
~}t.OÛtlQ-
-AiiEA- ~..'
1 sq. ft. per three
lineal ft. of street
frontage.
Max. 50 sq. ft.
1 sq. ft, per three
lineal ft, of street
frontage.
Max. 80 sq. ft.
18% of waJJ area
Max. 75 sq. ft.
50% of canopy
face
Length not to
Exceed 75% of
canopy width
Regulated as Wall Signs
32 sq. ft. , 8 ft.
32 sq, ft,
er sign
80 sq. ft
9/26/2005
TABLE 11-3C-3 STANDARDS IN THE L-O, O-T AND TN-C DISTRICTS
H~ 1.."-" .t:r-ATION
15 fl.
Not to project
above the
wall
Not to extend
above top of
canop
8 ft. minimum
clearance
8 ft.
5 ft. from any Direct,
property line Indirect, Internal
5 fl. from any Direct,
property line Indirect, Internal
See Section 11- Indirect, Internal
30-80 L
Indirect,
Internal
Internal
None
None
~~R~J~T~ -
1 per street
frontage
1 per 1000
lineal feet of
street frontage
See Section
11-30-80
1 per property
1 per business
1 per lot
Max. 3 signs
per lot
1 per entrance
c~,.PERMtt<c.
"-'~"
tY
Y
18 inches from
wall.
8 ft.
Y
No projection
Y
8 ft,
Y
N
N
Max. building
height of
. , district
'When CQ/I1bination ofw3H& freestanding signs are used, IoIaI area for waif signs shalf be reduced by 50% if aU signage is oriented to same frontage.
2 See Sections 11-30-81 and 11..JD-9D2b for allowable backaround area where a subdivision identification sign and center sign are on the same street front§ge.
23
Indirect, Internal
Y
Chapter 3 Article D. SIGN REQUIREMENTS
SIGN
TYPE
Freestanding
(Single bldg.)
Center Signs2
(See Section 11-
3D-9E
Wall Signs1
Canopy Signs
Under Canopy
Awning Signs
Rent, Lease &
Sale Signs
Construction
Subdivision
Identification2
24
9/26/2005
TABLE 11-3C-4 STANDARDS IN THE C-N AND C-C DISTRICTS
1 sq. ft. per lineal 115ft.
ft. of frontage.
Max. 70 sq. ft.
1 sq. ft. per lineal I 20 ft.
ft.
Max.150 sq. ft.
18% of wall area.
50% of canopy
face
Length not to
Exceed 75% of
canopy width
Regulated as Wall ~
64 sq. ft. 10 ft.
32 sq. ft.
er sign
150 sq. ft
Not to project
Above wall
Not to extend
above top of
cano
8 ft. minimum
clearance
12 ft.
1 ft. from front
property line;
5 ft. from side
1 ft. from front
property line;
5 ft, from side
See Section 11-
30-80
Direct,
Indirect,
Internal
Direct,
Indirect,
Internal
Indirect,
Internal
Indirect or
Internal
1 per 1,000
lineal feet of
street frontage
See Section
11-30-80
1 per street
frontage
y
Max, 18 inches
from wall
No projection
8 ft.
y
Max. building
height of
, district - - -
'twJien~bín_~U- &bes'tanding signSê5'ûsèd,1ota1 area fot waltSigns shan beieduèed by 50% if all signàge 1S oriented to same frontage. , -.'
2 See'Sections 11--3D-8Jand11--3D-9D2b for allowab/è background area where a subdiviSidnláèfilifìcafion sian and center sign are on the same streetfrontâJJe.
y
Internal
1 per business
8 ft.
y
None
1 per street
frontage
Max. 3 signs
per lot
1 per entrance
y
N
None
N
Indirect, Internal
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
TABLE 11-3C-5 STANDARDS IN THE C-G DISTRICTS
Max. building 15 ft. from
height of property line
. I district . -
1WhenCOmbinaüöttclMIf:&freestarrðing signs¡ü'fü5ed, total area tOr wall signs sbaÎ/œreduced by 50% if all sign age is oriented fa same frontage.
2 See Sections 1 E~~l and 11-3D-9D2b for allowable background area where a subdivision identification sign and center sign are on the same street frontage.
SIGN
. TYPE.
Freestanding
(Single bldg.)
Center Signs2
(See Section 11-
3D-9E
Wall Signs1
Canopy Signs
Under Canopy
Awning Signs
Rent, Lease &
Sale Signs
Construction
Subdivision
Identification2
25
35 ft.
18% of wall area.
Not to project
above the
wall face
Not to extend
above top of
cano
8 ft. minimum
clearance
..~. .t. --MJMØ&Rj PR~ .1' . ClEARAIQ
, . ," '.' ... ,'... ,t~~~ç.¡,';".", "~~~~~':?'';. .
1 ft. from front I Direct, Indirect, f 1 per street
property line; 5 Internal frontage
ft. from side
1 ft. from front Direct, Indirect, 1 per 1,000 I -- I -- IY
property line; 5 Internal linea! feet of
ft. from side street frontage
See Section 11- Indirect, Internal See Section Max. 18 inches Min. 12 ft. IY
30-80 11-30-80 from wall
Indirect, 2 per street No projection I -- IY
Internal frontage
Internal 1 per business, -- I Min. 8 ft. Iy
None
1 per street
frontage
Max. 3 signs
per lot
N
50% of canopy
face
32 sq. ft,
per sign
12 ft.
N
None
200 sq. ft
Indirect, Internal
1 per entrance
y
Chapter 3 Article D. SIGN REQUIREMENTS
TABLE 11-3C-6 STANDARDS IN THE I-L AND I-H DISTRICTS
Center Signs2
{See Section 11-
3D-9E
Wall Signs1
Canopy Signs
Under Canopy
Awning Signs
Rent, Lease &
Sale Signs
Construction
Subdivision
Identification2
25 ft.
18% of wall
area
Not to extend
above roof
line
Not to extend
above top of
canop
8 ft. min.
clearance
1 ft. from front
property line;
5 ft. from side
1 ft. from front
property line;
5 ft. from side
See Section 11-
30-80
5' from property
line
5' from property
line
5 ft. from
property line
Direct,
Indirect,
Internal
Direct,
Indirect,
Internal
Indirect, Internal
Indirect,
Internal
Internal only
None
None
1 per street
frontage
1 per 1,000
lineal feet of
street frontage
See Section
11-30-80
2 per street
frontage
1 per business
1 per street
frontage
Max. 3 signs
per lot
1 per entrance
; 1JQI1'¡;~ (;r~~;
Max. 18 inches
from wall
Min. 12 ft.
50% of canopy
face
32 sq, ft.
per sign
150 sq. ft
12 fL
No projection
Min. 8 ft
Max. building
height of
, ,.district, , ~ .~ ~',
JWtreaoombinationiltwall & freestanding S~lI~, 1otatarea forWalI signssfla!lbe rèduced by 50% if all sìgnageis orienteifloæmafrontage. -"'-C," ,
2'Seè SéCt1ons 1f~àr\(f11-3D-9D2b for allowáblebackground area where a subdivisionicletttificalion sign an'ð cenler sign are (¡nthe same street frontaae.
26
Indirect, Internal
9/26/2005
y
y
y
y
y
N
N
y
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
TABLE 11-3C- 7 STANDARDS IN THE 1-84 SIGN a VERLA Y
'~$JGN .
;ci':'lVPE;c ,~
':~~~~~
,,;c 15s~:' ft, per line~ll40 ft.
ft, of frontage,
Max. 150 sq. ft.
300 sq. ft.
]t,1.fJMJNA1'tOftf, èi= + ~~~~
Center Signs2
(See Section 11-3-
9E)
60 ft.
25% of freeway
frontage taken
from side lot line
1 ft. from front
property
line; 5 ft. from
side
See Section 11-
30-80
1 per freeway
orientation
:;~~~~~
~:':>:
Freestanding
(Single bldg.)
y
Wall Signs
18% of wall area
Not to project
above the
wall face
Direct, Indirect, '1 per 1,000
Intemal lineal feet of
street frontage
I See Section
Indirect, Internal I Max. 18 inches I Min. 12 ft.
11-30-80 from wall
y
y
Subdivision
Jdentification2
300 sq. ft
Indirect, Internal
1 per entrance
y
Max. building ¡ 5 ft, from
height of property line
district
1Wflen combination df~ & freestanding sig~are ~~.total area for '!'@JI:sig,ns shall be reduced by50% if all sigoageJUlÎénte.à!Q same:frootage,
~ ..2'~"" Cl"""'~ils n$.;e¡- n<f 11-3D-9D2bfoìa~'ba. k-iMUì1d a":wi.~a"'~'hÆ'¡.' î ..It~c;dOR' ,";n,f~. i Bare.;ß"",^---'S!reet~~
,,~'-"iM!L! . ~ .' a . "~' "C"M'V . ,-re@!,J~'L'!!,t.!'~VIt!.QI}J~ . .~~~$III. ,~.lm"U:¡""'JH.t: . - ~
27
Chapter 3 Article D. SIGN REQUIREMENTS
9/26/2005
TABLE 11-3C-8 STANDARDS IN THE FREEWAY INTERCHANGE SIGN 0 VERLA Y
c,~f.,,~/
:/,:/,"'ÖF~_>-
'_IÍll,Ø~
.I~,-
~:~~~~!j~::~e ~
40 ft.
Center Signs
(See Secton 11-
30-9E)
Max. 300 sq. ft.
40 ft.
Wall Signs
18% of wall area
Not to project
above the
wall face
28
1 ft. from front
property
line; 5 ft. from
side
1 ft. from front
property
line; 5 ft, from
side
See Section 11-
30-80
Direct, Indirect,
Internal
Direct, Indirect,
Internal
Indirect, Internal
1 per
buildable Jot
1 per 1,000
lineal feet of
street
frontage
See Section
11-30-80
Max. 18 inches
from wall
y
y
Min. 12 ft.
y
Chapter 3 Article D, SIGN REQUIREMENTS
9/26/2005
FIGURE 11-30-2: 1-84/MERIDIAN ROAD INTERCHANGE SIGN 0 VERLA Y
0
2000
4000
6000 Feet
N
W+E
2000
s
1
Chapter 3 Article D. SIGN REQUIREMENTS
FIGURE 11-30-3: 1-84/EAGLE ROAD INTERCHANGE SIGN 0 VERLA Y
LJE!J1ilr~~u
~~--
lìllrmm~ f~ ~ - ~
T '" Ì'\ '"' AI.. UX>
~ :\T JJI ~ N'Jt- \'i\" ¡~
ffiHEffiEEBHIi~ I~' ~ ' '~~
I: ir", "" I IV ITII 'II'"" 'f 'J .~
) '" I I I "'" ~ ~
\~ I, ,/ "//'ó1 '"
:r~¡¡ m II L[ ':; /'-" /'/ "'- J. .~"' ~ I
go< ~ ----- ""/; :;; . ~. " / "
Ii ffiII % ""'" I ~..
~ ~ ,'111. ~ "" '//" ~~
=~ ~ /:;/// ~; Ëe-- ~.
- -/ ~~
'// Z u. -I-- ~
~<-'\ %2:t ~ ~«~ W ~ "'-!: ,
~~Y1 "" '/ y/ -ý'/ ;; ,,' IJ 1// - l3--BRE7r
~ N I Jc--_[/ "ãTTT
r---j :=: U
r J r-
j Ii Ii 1111, -
~if~'¡ ~~TU~~~ ~
\9 =-~4t ~ ~
~ ~ ~~ ~,~ ~
~ - , ~ L~
"f 1 f---,.¡ -11:-::' ¡::::¡IJ J
~1"II~ , ~ - I I.
2000 0 2000 4000 6000 SOOO Feet
r---I t----I I r I
2
9/26/2005
N
W*E
s
Chapter 3 Article D. SIGN REQUIREMENTS
ARTICLE E.
11-3E-1 :
11-3E-2:
11-3E-3:
11-3E-4:
11-3E-5:
11-3E-6:
11-3E-7:
11-3E-8:
11-3E-9:
11-3E-10:
11-3E-11:
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE E. TEMPORARY USE REQUIREMENTS
SECTIONS:
PURPOSE
APPLICABILITY
PROCESS
GENERAL STANDARDS
STANDARDS FOR FIREWORKS STANDS
STANDARDS FOR SUBDIVISION MODEL HOME/REAL ESTATE SALES OFFICES
STANDARDS FOR CONSTRUCTION SITES .
STANDARDS FOR SEASONAL SALE OF AGRICUL TURAL AND FOOD
PRODUCTS
STANDARDS FOR ARTS, ENTERTAINMENT OR RECREATION EVENTS
STANDARDS FOR VENDORS NOT ASSOCIATED WITH AN ARTS,
ENTERTAINMENT OR RECREATION EVENT
STANDARDS FOR PROMOTIONAL ACTIVITIES IN THE NONRESIDENTIAL
DISTRICTS INVOLVING THE SALE OF GOODS AND MERCHANDISE WHERE IT
IS ACCESSORY TO THE PRINCIPALLY PERMITTED USE.
11-3E-1: PURPOSE: The regulations of this Article are intended to allow for
the temporary or seasonal uses that support community events and celebrations, or
uses of a limited duration that are accessory to a primary use.
11-3E-2: APPLICABILITY: The regulations of this Article shall apply to all
temporary uses in all districts with the exception that special events and seasonal
activates that are conducted as part of an education facility shall be deemed
accessory uses,
11-3E-3: PROCESS: The applicant shall obtain a Certificate of Zoning
Compliance for any temporary use,
11-3E-4:
A.
GENERAL STANDARDS:
Time period:
1. Except as otherwise defined in this section, a temporary use is allowed for
a specified period not exceeding twelve (12) months from issuance of
Certificate of Zoning Compliance.
2. For seasonal stands or events, the Certificate of Zoning Compliance shall
specify a beginning and end date,
"'-
Chapter 3 Article E, TEMPORARY USE REQUIREMENTS
B.
Location:
1, Structures and/or the display of merchandise shall comply with the
setback requirements of the district within which it is located.
2, Temporary structures and merchandise shall be displayed so as not to
interfere with the clear vision triangle. In no case shall items be displayed,
or business conducted within the public right-of-way, unless otherwise
authorized by the Transportation Authority.
C,
Structures:
1. A maximum of one (1) structure shall be allowed and may cover a
maximum of five hundred (500) square feet.
2, The use shall not result in the construction of any permanent structures
that would not otherwise be permitted subject to the regulations of this
Title,
3, Any temporary structures shall be portable and completely removed at the
end of the allowed time period.
4, The applicant shall obtain any necessary building permits.
D.
Caretaker unit:
1. One (1) caretaker unit in a trailer or recreational vehicle may be allowed on
the site only for the purposes of security and maintenance of the site.
2. The unit shall be completely removed at the end of the allowed time
period.
E.
Parking and access:
1. Adequate off-street parking shall be provided to serve the use.
2. The use shall not displace the required off-street parking spaces or
loading areas of the principal permitted uses on the site,
3, The entrance and exit drives shall be designed to prevent traffic hazards
and nuisances,
4. All surfaces used for parking shall be constructed with paving, vegetative
cover or of dustless material.
2
Chapter 3 Article E. TEMPORARY USE REQUIREMENTS
A.
B.
C,
3
F,
Signs, All signs erected in association with the use shall be in compliance
with the regulations for signs, Chapter 3, Article 0 sign requirements of the
Meridian City Municipal Code,
G,
Noise: Compressors, fans, pumps, and other motorized equipment shall be
located or shielded to reduce noise levels to adjoining properties.
H,
Site conditions:
1, The site shall be returned to a clean condition after the termination of the
use, including free of debris and garbage,
2. Unsold food products, trees, greens, or debris generated by the use shall
be properly disposed off the site.
I.
Unobstructed sidewalk: If a private sidewalk or pedestrian way in front of the
building is used for the temporary use, a minimum width of four (4) feet shall
remain unobstructed for pedestrian use,
J.
Conditions: The Director may require additional conditions to mitigate
adverse effects on surrounding properties, particularly regarding traffic
generated, compressor and pump noise, odor, light and glare, dust, and
hours of operation. The conditions may include, but not be limited to, any or
all of the following:
1, Standards related to the emission of noise, vibration, and other potentially
objectionable impacts,
2, Limits on time of day for the conduct of the specified use, including
deliveries and maintenance.
3. Other standards necessary to protect the public health, safety, and welfare
and mitigate adverse effects on surrounding property.
K.
The use shall comply with any guidelines, regulations and permitting
process required by any authorizing public agencies, including but not
limited to, the Central District Health Department, Transportation Authority,
and Meridian City Departments,
11-3E-5:
STANDARDS FOR FIREWORKS STANDS:
The use shall be prohibited in residential districts.
The applicant or owner shall obtain written approval of the Meridian City Fire
Department.
Dates of fireworks sales shall comply with Idaho Code §39-2606.
Chapter 3 Article E. TEMPORARY USE REQUIREMENTS
D.
Applicant shall comply with the standards for access as determined by the
Transportation Authority,
E.
Parking areas shall be paved, in vegetative cover, or improved with a
dustless material.
11-3E-6: STANDARDS FOR SUBDIVISION MODEL HOME/REAL ESTATE
SALES OFFICES:
A.
The sales office shall be located on a lot within a subdivision or planned unit
development.
B.
The principal use of the sales office shall be the sale of lots and/or dwellings
within the development.
C,
The sales office shall meet the construction standards for commercial
occupancy and obtain all necessary permits as required by the Building
Code in accord with Title 7 of the Meridian City Municipal Code.
D.
When required, the applicant or owner shall obtain a building permit to
convert the sales office to a dwelling or shall remove the sales office within
30 days of the sale or rent of the final lot or space.
11-3E-7:
STANDARDS FOR CONSTRUCTION SITES:
A.
New development shall contain construction debris on-site and prevent
wind-blown debris from entering neighboring properties,
B,
Temporary buildings, construction trailers, equipment and materials may be
permitted in any district during the period construction work is in progress.
Such temporary facilities or equipment shall be removed within 60 days of
completion of the construction work,
11-3E-8: STANDARDS FOR SEASONAL SALE OF AGRICULTURAL AND
FOOD PRODUCTS:
A.
B.
C.
D,
4
The provisions of this title shall apply to holiday tree lot, snow cone shack,
pumpkin sale stand, produce stand, and similar uses as determined by the
Director,
The use shall be prohibited in residential districts,
Such sales are limited to a period of time not to exceed two (2) consecutive
months for pumpkin and Christmas tree sales, and four (4) consecutive
months per calendar year for other uses, Christmas tree lots shall be
removed by the 1 st day of January.
Applicant shall comply with the standards for access as determined by the
Chapter 3 Article E, TEMPORARY USE REQUIREMENTS
Transportation Authority.
E.
Parking areas shall be paved, in vegetative cover, or improved with a
dustless material.
11-3E-9:
EVENT:
STANDARDS FOR ARTS, ENTERTAINMENT OR RECREATION
A.
Events, such as festivals, carnivals, circuses, fairs, and amusement rides
may be allowed in any nonresidential district for a period not to exceed two
(2) weeks within any ninety- (90) day period,
B.
The Meridian City Police Department shall approve the location and access
for any use in this category,
C.
Vendors shall obtain a City of Meridian Vendor License,
11-3E-10: STANDARDS FOR VENDORS NOT ASSOCIATED WITH AN ARTS,
ENTERTAINMENT OR RECREATION EVENT:
A.
The applicant shall provide notarized consent of the property owner.
8,
The use shall be prohibited in Residential Districts,
C.
Vendor shall obtain City of Meridian Vendor License.
Q,
No caretaker unit shall be allowed.
E.
Signs shall only be allowed on the vending units and shall not exceed
sixteen (16) square feet in area,
F,
No direct sales to customers in vehicles shall be allowed, The design and
placement of the units shall prohibit such sales. (Vendors with drive-up
windows must be in a structure and shall be processed as a conditional use
in accord with Chapter 5 administration of this Title.)
G.
The 12-month approval period shall be evaluated at the time of the annual
license renewal.
1, If Planning staff and/or the Code Enforcement Officers have unresolved,
compelling complaints regarding the vendor, a new temporary use shall be
required, Otherwise the twelve-(12) month approval period shall be
extended.
5
Chapter 3 Article E, TEMPORARY USE REQUIREMENTS
2. As complaints are received, the Director will determine if the complaint
represents a compelling health and/or safety issue. Any compelling
complaints will be forwarded to the Code Enforcement Officer for
resolution in accord with the enforcement provisions of Section 11-1-11 of
this Title.
11-3E-11: STANDARDS FOR PROMOTIONAL ACTIVITIES IN THE
NONRESIDENTIAL DISTRICTS INVOLVING THE SALE OF GOODS AND
MERCHANDISE WHERE IT IS ACCESSORY TO THE PRINCIPALLY PERMITTED
USE:
A.
B.
C.
D,
6
The applicant shall provide notarized consent of the property owner.
The use shall be prohibited in residential districts.
Activities may be conducted outside for a period of not more than two (2)
weeks,
Applicant may request renewal twice during any calendar year, for a
maximum of six (6) weeks per calendar year.
Chapter 3 Article E. TEMPORARY USE REQUIREMENTS
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE F. PRIVATE STREET REQUIREMENTS
ARTICLE f.
11-3F-1:
11-3F-2:
11-3F-3:
11-3F-4:
11-3F-5:
SECTIONS:
PURPOSE
APPLICABILITY
PROCESS
STANDARDS
REQUIRED FINDINGS
11-3F-1: PURPOSE: The regulations of this Article are intended to provide
better circulation and safety within commercial, industrial, mew, and multifamily
developments by establishing a clear emergency vehicle travel lane and private
street name addressing for properties that do not have internal public roads, It is not
the intent to approve private streets for single-family, duplex and/or townhouse
developments other than those that create a common mew through the site design.
The applicability may be extended where the Director or Fire Marshal determines
that private streets will enhance the safety of the development. The Fire Marshal
may require designation of a private street within existing developments where it is
in the best interest of the public safety and health to be able to better locate a given
property in the event of an emergency.
11-3F-2: APPLICABILITY: The provisions of this section shall apply to any
properties that do not have frontage on a public street or where frontage is not
required,
11-3F-3:
PROCESS:
A.
An application and fees, in accord with Chapter 5 administration of this Title,
shall be submitted to the Director on forms provided by the Planning
Department.
B
Upon tentative approval of the application by the Director subject to any
applicable conditions of approval and the regulations of Chapter 5
administration of this Title, the applicant or owner shall have one (1) year to
complete the following tasks:
1. Obtain approval from the Ada County Street Name Committee for a
private street name( s);
2. Contact the Transportation Authority (ACHD) to install an approved street
name sign that complies with the regulations of the Ada County Uniform
Street Name Ordinance;
Chapter 3 Article F. PRIVATE STREET REQUIREMENTS
3. Create a perpetual ingress/egress easement or a single platted lot for the
private street to all applicable properties; and
4. The applicant or owner shall provide documentation of a binding contract
that establishes the party or parties responsible for the repair and
maintenance of the private street, including regulations for the funding
thereof,
5, Upon completion of the items noted above, the Director shall issue a letter
stating that the private street has been approved, No building permit shall
be issued for any structure using a private street for access to a public
street until the private street has been approved,
11-3F-4: STANDARDS: All private streets shall be designed and constructed
to the following standards,
A.
Design standards:
1, Easement: The private street shall be constructed on a perpetual
ingress/egress easement or a single platted lot that provides access to all
applicable properties,
2, Connection point: Where the point of connection of the private street is to
a public street, the private street shall be approved by the Transportation
Authority,
3, Emergency vehicle: The private street shall provide sufficient maneuvering
area for emergency vehicles as determined and approved by the Meridian
Fire Department.
4, Gates: Gates or other obstacles shall not be allowed.
B,
Construction standards:
a, For conversion of an existing facility to a private street at the direction of
the Fire Marshal:
a. All drive aisles shall be posted as fire lanes with no parking allowed.
b. If a curb exists next to the drive aisle, it shall be painted red,
2. For all other private streets:
a, Roadway and storm drainage: The private street shall be constructed
in accord with the roadway and storm drainage standards of the
Transportation Authority or as approved by the City of Meridian
based on plans submitted by a certified engineer,
2
Chapter 3 Article F, PRIVATE STREET REQUIREMENTS
b, Street width: The private street shall be constructed within the
easement and shall have a travel lane width of twenty-four (24) feet
or twenty-six (26) feet as determined by the Fire Marshal relative to
the height and size of the proposed structures that adjoin the private
street. .
c. Sidewalks: A five-foot (5') attached sidewalk or four-foot (4')
detached sidewalk shall be provided on one side of the street in
commercial districts. This requirement may be waived if the applicant
can demonstrate that an alternative pedestrian path exists.
d. Fire lanes: all drive aisles shall be posted as fire lanes with no
parking allowed, In addition, if a curb exists next to the drive aisle, it
shall be painted red,
2. Alternative compliance: Upon recommendation of the City Engineer and
Fire Marshall, the Director may approve, or recommend approval of
alternative design or construction standards when the applicant can
demonstrate that the proposed overall design meets or exceeds the intent
of the required standards of this Article and shall not be detrimental to the
public health, safety, and welfare.
11-3F-5: REQUIRED FINDINGS: In order to approve the application, the
Director shall find the following:
A.
The design of the private street meets the requirements of this Article;
8,
Granting approval of the private street would not cause damage, hazard, or
nuisance, or other detriment to persons, property, or uses in the vicinity; and
C.
The use and location of the private street shall not conflict with the
Comprehensive Plan and/or the regional transportation plan.
3
Chapter 3 Article F. PRIVATE STREET REQUIREMENTS
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE G. COMMON OPEN SPACE AND SITE AMENITY REQUIREMENTS
ARTICLE G. SECTIONS:
11-3G-1: PURPOSE
11-3G-2: APPLICABILITY
11-3G-3: STANDARDS
11-3G-1 :
PURPOSE:
A.
The regulations of this Article are intended to provide for common open
space and site amenities in residential districts that improve the livability of
residential neighborhoods, buffer the street edge, and protect natural
amenities.
B.
The regulations are intended to establish minimum standards for common
open space and site amenities, and requirements for the long-term
maintenance of these areas,
11-3G-2: APPLICABILITY: The standards for common open space and site
amenities shall apply to all new single-family, townhouse, two-family duplex, and
multifamily developments of five (5) acres or more,
11-3G-3:
STANDARDS:
A.
Open space and site amenity requirement:
1. The total land area of all common open space shall equal or exceed five
percent (5%) of the gross land area of the development.
2, One (1) additional site amenity shall be required for each additional twenty
(20) acres of development area.
B.
Qualified open space: The following may qualify to meet the common open
space requirements:
1, Any open space that is active or passive in its intended use, and
accessible by all residents of the development, including but not limited to:
a, Open grassy area of at least fifty feet (50') by one hundred feet (100') in
area;
b, Community garden;
c, Ponds or water features; or
2
Chapter 3 Article G. COMMON OPEN SPACE AND SITE AMENITY REQUIREMENTS
d, Plaza
2, Additions to a public park or other public open space area,
3, The buffer area along collector streets may be included in required
common open space for residential subdivisions.
4. A street buffer with a minimum of ten feet (10') in width and street trees
planted in accord with Section 11-38-7 LANDSCAPE BUFFERS ALONG
STREETS of this Title may count up to fifty percent (50%) of the
requirement.
5, Parkways along local residential streets that meet all the following
standards may count toward the common open space requirement:
a, The parkway is a minimum of eight feet (8') in width from street curb to
edge of sidewalk.
b, The parkway is planted with street trees in accord with Section 11-38-
7.G,8 and Section 11-38-7,C.9 LANDSCAPE BUFFERS ALONG STREETS of
this Title,
c. Except for alley accessed dwelling units, the area for curb cuts to each
residential lot or common driveway shall be excluded from the open
space calculation, For purposes of this calculation, the curb cut area
shall be a minimum area of twenty six feet (26') by the width of the
parkway,
6. Parkways along collector and arterials that are a minimum of ten feet (10')
in width from street curb to sidewalk can be counted toward the open
space requirement.
7, Stormwater detention facilities when designed in accord with Section 11-
38-11 STORMWATER INTEGRATION of this Title,
C,
Qualified site amenities: Qualified site amenities shall include, but not be
limited to, the following:
1, Quality of life amenities:
a, Clubhouse;
b. Fitness facilities;
c, Enclosed bike storage;
d, Public art;
3
Chapter 3 Article G. COMMON OPEN SPACE AND SITE AMENITY REQUIREMENTS
e. Picnic area; or
f, Additional five percent (5%) open space,
2, Recreation amenities
a. Swimming pool;
b. Children's play structures; or
c, Sports courts,
3, Pedestrian or bicycle circulation system amenities meeting the following
requirements:
a, The system is not required sidewalks adjacent to public right-of-way;
b, The system connects to existing or planned pedestrian or bicycle routes
outside the development, as designated in the Meridian Parks
Department Pathway Plan; and
c, The system is designed and constructed in accord with standards set
forth by the Meridian Parks Commission,
4, Provision of transit stops, park-and-ride facilities or other multi modal
facilities to encourage alternative automobile transportation.
D.
Location:
1, The common open spaces and site amenities shall be located on a
common lot or an area with a common maintenance agreement.
2, Common open space shall be grouped contiguously with open space from
adjacent developments whenever feasible,
E.
Required improvements and landscaping:
1. Common open space shall be suitably improved for its intended use,
except that natural features such as wetlands, rock outcroppings, ponds,
creeks, etc, may be left unimproved.
2. At a minimum, common open space areas shall include one (1) deciduous
shade tree per eight thousand (8,000) square feet and lawn, either seed or
sad.
F.
Maintenance:
4
Chapter 3 Article G, COMMON OPEN SPACE AND SITE AMENITY REQUIREMENTS
1, All common open space and site amenities shall be the responsibility of an
owners association for the purpose of maintaining the common area and
improvements thereon; or
2, Land designated as common open space may be conveyed to the City,
where the Parks Department agrees to accept conveyance.
5
Chapter 3 Article G, COMMON OPEN SPACE AND SITE AMENITY REQUIREMENTS
CHAPTER 3
REGULATIONS APPLYING TO ALL DISTRICTS
ARTICLE H. DEVELOPMENT ALONG FEDERAL AND STATE HIGHWAYS
ARTICLE H.
11-3H-1:
11-3H-2:
11-3H-3:
11-3H-4:
11-3H-5:
SECTIONS:
PURPOSE
APPLICABILITY
PROCESS
STANDARDS
REQUIRED FINDINGS
11-3H-1: PURPOSE: The regulations of this Article are intended to achieve
three purposes: 1) limit access points to state highways in order to maintain traffic
flow and provide better circulation and safety within the community and for the
traveling public, 2) to preserve right-of-way for future highway expansions, and 3)
design new residential development along state highways to mitigate noise impacts
associated with such roadways,
11-3H-2: APPLICABILITY: The following standards shall apply to all
development along state highways, including but not limited to State Highway 69,
State Highway 55, State Highway 20-26, and Interstate 84, The following standards
shall also apply to development along McDermott Road from Chinden Boulevard to
Interstate 84 as the City of Meridian's preferred location for a future highway right-
of-way for the State Highway 16 extension. If the Idaho Transportation Department
(ITD) determines an alternate location for the State Highway 16 extension, these
standards shall apply to the ITD determined location.
11-3H-3: PROCESS: Staff shall review all development applications for
compliance with these standards, The decision making body may consider and
apply modifications to the standards of this section upon specific recommendation
of the Idaho Transportation Department.
11-3H-4:
STANDARDS:
A.
Access to 1-84 and McDermott Road (or future Highway 16 extension): no
access shall be allowed except at specific interchange locations as
established by the Idaho Transportation Department.
B,
Access to State Highway 69, State Highway 55, and State Highway 20-26:
1. Use of existing approaches shall be allowed to continue provided that all of
the following conditions are met:
a. The existing use is lawful and properly permitted effective September 15,
2005,
1
Chapter 3 Article H. DEVELOPMENT ALONG FEDERAL AND STATE HIGHWAYS
b, The nature of the use does not change (for example a residential use to
a commercial use).
c, The intensity of the use does not increase (for example an increase in
the number of residential dwelling units or an increase in the square
footage of commercial space).
2. If an applicant proposes a change or increase in intensity of use, the
owner shall develop or otherwise acquire access to a street other than the
state highway. The use of the existing approach shall cease and the
approach shall be abandoned and removed,
a, No new approaches directly accessing a state highway shall be allowed.
b, Public street connections to the state highway shall only be allowed at:
i.
the section line road; and
ii. the half-mile mark between section line roads, These half-mile
connecting streets shall be collector roads.
3, The applicant shall construct a street, generally paralleling the state high,
be designed to accommodate future connectivity and access to all
properties fronting the state highway that lie between the applicant's
property and the nearest section line road and/or half mile collector road.
The intent is to provide for future connectivity and access to all properties
fronting the state highway that lie between the applicant's property and the
nearest section line road and/or half-mile collector road. The street shall
be designed to collect and distribute traffic,
a. The applicant shall be responsible to construct the segment of the street
within the applicant's property, This standard is not intended to require
off-site improvements,
b, The street shall meet the road standards of the Ada County Highway
District.
c, The street shall connect to the section line road at a distance that is no
closer than 660 (as measured from center line to center line) from the
intersection with the state highway.
d, The street shall provide buildable lots between the highway and the
collector road, For the purposes of this Article, such streets shall be
termed backage roads,
2
Chapter 3 Article H. DEVELOPMENT ALONG FEDERAL AND STATE HIGHWAYS
3
e, Frontage streets or private streets may be considered by the Council at
the time of property annexation or through the conditional use process.
Frontage streets and private streets shall be limited to areas where there
is sufficient access to surrounding properties and a public street is not
desirable in that location,
C,
Design and construction standards for state highways:
1, The applicant shall have an approved permit from the Idaho
Transportation Department for construction of any access to the state
highway and/or any construction done in the highway right of way,
2, The width of right-of-way reservations shall be as set forth by the ITD,
3, Along State Highway 55, the applicant shall be responsible for
constructing a ten-foot (10') multiuse pathway with a public use easement
and installing streetlights and landscaping consistent with the Eagle Road
Corridor Study.
4, Along Highway 69, the applicant shall be responsible for constructing a
ten~foot (10') multi-use pathway with a public use easement.
0,
Noise abatement for residential uses along state highways:
1, The applicant shall provide traffic noise abatement by constructing a berm
or a berm and wall combination approximately parallel to the state
highway.
2, The top of the berm or berm and wall in combination shall be a minimum
of ten feet (10') higher than the elevation at the centerline of the state
highway.
3. If a wall is proposed, the wall shall meet the following standards:
a. Wall materials shall be impervious concrete or stucco or other
appropriate sound attenuating material.
b, Intermittent breaks in the berm or berm and wall in combination will
degrade the function and shall not be allowed,
c. The applicant shall not construct a monotonous wall. In order to achieve
this standard, the applicant may choose one or both of the following
variations:
i.
The color and/or texture of the wall shall be varied every 300
linear feet. This could include murals or artwork.
Chapter 3 Article H. DEVELOPMENT ALONG FEDERAL AND STATE HIGHWAYS
ii. The wall shall be staggered every 300 linear feet subject to
Section 11-3H-4D4 above that prohibits breaks in the wall.
4. The Director may approve alternative compliance as set forth in Chapter 5
ADMINISTRATION of this Title where the applicant has a substitute noise
abatement proposal in accord with ITD standards and prepared by a
qualified sound engineer.
4
Chapter 3 Article H, DEVELOPMENT ALONG FEDERAL AND STATE HIGHWAYS
8/29/05
CHAPTER 4
SPECIFIC USE STANDARDS
SECTIONS:
11-4-1: PURPOSE
11-4-2: APPLICABILITY
11-4-3: SPECIFIC USE STANDARDS
11-4-1: PURPOSE: This Chapter provides specific standards for all uses as set
forth within the applicable district in accord with Chapter 2 DISTRICT REGULATIONS of this
Title,
11-4-2: APPLICABILITY: These regulations apply to any property where the
specific use is listed as a permitted, accessory, or conditional use in the Table of
Allowed Uses by District in accord with Chapter 2 DISTRICT REGULATIONS of this Title,
11-4-3: SPECIFIC USE STANDARDS: These standards are in addition to the
requirements of Chapter 3 REGULATIONS APPLYING TO ALL DISTRICTS of this Title,
11-4-3,1:
ANIMAL CARE FACILITY:
A.
All animals shall be indoors at all times,
B.
The facility owner and/or operator shall comply with all State and local
regulations relative to such a facility and shall maintain housekeeping practices
designed to prevent the creation of a nuisance and to reduce noise and odor to a
minimum,
11-4-3,2: ARTS, ENTERTAINMENT OR RECREATION FACILITY, INDOORS
AND OUTDOORS:
A.
General Standards
1, All structures or outdoor recreation areas shall maintain a minimum setback of
one hundred feet (100') from any abutting residential districts, The playing
areas of golf courses, including golf tees, fairways, and greens, are an
exception to this standard,
2, No outdoor event or activity center shall be located within fifty feet (50') of any
property line and shall operate only between the hours of 6 a,m. and 11 p.m,
3, Accessory uses include, but are not limited to: retail, equipment rental,
restaurant and drinking establishments may be allowed if designed to serve
patrons of the use only,
4, Outdoor speaker systems shall comply with the Section 11-3A-13 OUTDOOR
SPEAKER SYSTEMS of this Title,
1
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
B,
Additional Standards for swimming pool: Any outdoor swimming pool shall be
completely enclosed within a 6-foot non-scalable fence that meets the
requirements of the Building Code in accord with Title 10, Chapter 1, of the
Meridian City Code,
C.
Additional standards for outdoor stage or musical venue: Any use with a capacity
of one hundred (100) seats or more or within one thousand feet (1,000') of a
residence or a residential district shall be subject to approval of a conditional use
permit.
11-4-3.3:
ARTIST STUDIO:
A.
All production, fabrication and assembly of materials shall be conducted within a
completely enclosed structure if adjoining a residence or a residential district.
B.
If in an industrial district, accessory retail sales shall be limited to a floor area not
exceeding twenty-five percent (25%) of the total enclosed area of the use,
Goods sold shall be only those produced on the site or complementary products.
11-4-3.4:
BUILDING MATERIAL, GARDEN EQUIPMENT AND SUPPLIES:
A.
Outdoor storage areas for materials (excluding growing plants in-ground or in-
containers), and mechanical equipment shall comply with Section 11-3A-12
outdoor service and equipment areas of this Title.
B.
Outdoor speaker systems shall comply with the Section 11-3A-13 outdoor
speaker systems of this Title.
11-4-3.5: CEMETERY: Graves and monuments shall not be located within fifteen
feet (15') from any property line.
11-4-3,6: CHURCH OR PLACE OF RELIGIOUS WORSHIP: Schools, child day
care services, meeting facilities for clubs and organizations, and other similar uses not
operated primarily for the purpose of religious instruction, worship, government of the
church, or the fellowship of its congregation may be permitted to the extent the activity is
otherwise permitted in the district.
11-4-3.7:
A.
B.
11-4-3,8:
A.
2
CIVIC, SOCIAL OR FRATERNAL ORGANIZATIONS:
No outdoor event or activity center associated with the use shall be located
within fifty feet (50') of any property line.
Accessory sales and or distribution of beer and wine shall be allowed,
CONTRACTOR'S YARD:
All structures or outdoor storage areas shall be located a minimum of one
hundred feet (100') from any residential district.
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
B.
Outdoor storage areas shall comply with Section 11-3A-14 outdoor storage of
this Title. '
C,
The site shall not be used as a junkyard or vehicle wrecking yard as herein
defined.
11-4-3.9:
DAY CARE FACILITY:
A.
General standards for all child day care and adult care uses, including the
classifications of day care center; day care, family; and day care, group:
1, In determining the type of day care facility, the total number of children cared
for during the day and not the number of children at the facility at one time, is
the determining factor. The operator's children are excluded from the number,
2, On-site vehicle pickup, parking and turnaround areas shall be provided to
ensure safe discharge and pickup of clients,
3. The decision-making body shall specify the maximum number of allowable
clients and hours of operation as conditions of approval.
4, The applicant or owner shall secure and maintain a Basic Day Care License
from the State of Idaho Department of Health and Welfare-Family and
Children's Services Division,
5, In residential districts or uses adjoining an adjacent residence, the hours of
operation shall be between 6:00 a.m, to 11 :00 p,m, This standard may be
modified through approval of a Conditional Use Permit.
B.
Additional standards for day care facilities that serve children:
1, All outdoor play areas shall be completely enclosed by minimum six-foot (6')
non-scalable fence to secure against exit/entry by small children and to screen
abutting properties. The fencing material shall meet the swimming pool fence
requirements of the Building Code in accord with Title 7 of the Meridian City
Municipal Code.
2, Outdoor play equipment over six feet (6') high shall not be located in a front
yard or within any required yard.
3. Outdoor play areas in residential districts adjacent to an existing residence
shall not be used after dusk.
11-4-3,10:
DRINKING ESTABLISHMENT:
A.
The facility shall comply with all Idaho Code regulations regarding the sale,
manufacturing, or distribution of alcoholic beverages,
3
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
B.
The drinking establishment shall not be located within three hundred feet (300')
of a property used for a church or education service, Nor shall the drinking
establishment be located within one thousand feet (1,000') of an adult
entertainment establishment.
C,
For properties abutting a residential district, no outside activity or event shall be
allowed on the site, except in accord with Chapter 3 Article E. temporary use
requirements of this Title,
11-4-3.11 :
DRIVE. THROUGH ESTABLISHMENT:
A.
A drive-through establishment shall be an accessory use where the drive-
through facility (including stacking lanes, speaker and/or order area, pick up
windows, and exit lanes) is not within three hundred feet (300') of another drive-
through facility or a residential district or an existing residence. Otherwise a
Conditional Use Permit is required.
B.
All establishments providing drive-through service shall identify the stacking lane,
menu and speaker location (if applicable), and window location on the certificate
of zoning compliance or the Conditional Use Permit.
C,
A site plan shall be submitted that demonstrates safe pedestrian and vehicular
access and circulation on the site and between adjacent properties. At a
minimum the plan shall demonstrate compliance with the following standards:
1, Stacking lanes shall have sufficient capacity to prevent obstruction of the
public right-of-way by patrons;
2. The stacking lane shall be a separate lane from the circulation lanes needed
for access and parking;
3, The stacking lane shall not be located within ten feet (10') of any residential
district or existing residence;
4. Any stacking lane greater than one hundred feet (100') in length shall provide
for an escape lane,
5, A letter from the Transportation Authority indicating the site plan is in
compliance with the authority's standards and policies shall be required,
0,
The applicant shall provide a six-foot (6') sight-obscuring fence where a stacking
lane or window location adjoins a residential district or an existing residence.
11-4-3.12:
DWELLING, SECONDARY:
A.
One secondary dwelling unit is permitted on the same property in conjunction
with and clearly subordinate to a single-family dwelling,
4
Chapter 4 SPECIFIC USE STANDARDS
5
8/29/05
B.
Owner occupancy: To create and maintain a secondary dwelling unit, the
property owner shall reside on the property for more than six (6) months in any
twelve- (12) month period, The applicant for a secondary dwelling unit shall
demonstrate that either the single-family dwelling or the secondary unit is
occupied by the owner of the property, Owner occupancy is demonstrated by title
records, vehicle registration, voter registration or other similar means. Secondary
dwelling units shall not be subdivided or otherwise segregated in ownership from
the single-family dwelling unit.
C,
Maximum size: Secondary dwelling units shall be limited to a maximum of seven
hundred (700) square feet in size.
D.
Location: The secondary dwelling unit may be located within or attached to the
primary dwelling as a detached structure; or above a detached structure, such as
a garage, Detached secondary dwelling units shall be located to the side or rear
of a primary dwelling, No portion of the secondary dwelling unit shall be located
in front of the primary dwelling unit.
E,
Parking: At least one (1) parking space shall be provided on-site for the
accessory dwelling unit in addition to the required parking for the existing
residential unit. The conversion of a covered parking area (garage/carport) into a
secondary dwelling unit is not allowed unless the required covered parking can
be provided elsewhere on site,
F,
Entrance: Only one (1) entrance door of either the single-family dwelling or the
secondary dwelling unit shall be located facing anyone street.
G.
Design: The secondary unit shall be consistent in design with the single family
dwelling, including roof pitch, siding, color, materials, and window treatments,
H,
Prohibitions: Manufactured and mobile homes, and recreation vehicles shall be
prohibited for use as a secondary dwelling unit.
I.
Number of occupants: The total number of occupants in both the single-family
dwelling and the secondary dwelling shall not exceed the maximum number
established for a family, as defined in Chapter 1, Article A. definitions of this
Title.
11-4-3.13: DWELLING, SINGLE FAMILY: Only one single family dwelling shall be
allowed per property.
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
11-4-3,14:
EDUCATION INSTITUTION:
A.
Accessory uses: Accessory uses including, but not limited to, day care facilities,
special events, community services, social services, meeting facilities for clubs
and organizations, and school administration may be allowed,
ß,
Location criteria for elementary schools: Elementary schools should be located
within the center of neighborhoods with access encouraged from local streets,
Elementary school locations adjacent to public parks or open space are
encouraged, At least thirty percent (30%) of the perimeter of an elementary
school site should be open to streets or open space areas.
C,
Location criteria for middle schools and high schools: Middle and high schools
may take access off a designated arterial or collector street.
D,
An education institution with less than one hundred and fifty (150) students or
located within the TN-R District may be exempt from the requirements for open
space, landscaping, parking and drop off areas.
E,
A Conditional Use Permit shall be required for any education institution in which
any of the following circumstances exist:
1, The education institution is in excess of 250,000 square feet within a
residential district;
2, The education institution includes lighted fields adjoining or within a residential
district;
3, The education institution will generate in excess of 1,500 vehicular trips per
day;
4, The education institution takes access from a collector or an arterial street and
there is not a safe separate pedestrian and bikeway access between the
neighborhood and the school site,
F,
Portable classrooms that are not indicated on an approved conditional use or
certificate of zoning compliance shall require administrative approval. If the
proposed use cannot meet all of the following specific use standards, the use
shall require conditional use approval.
1, The portable classroom shall not be located in the front yard of the principal
school structure.
2. The portable classroom shall not be located in any required yard.
3. The placement of the portable classroom shall not reduce the number of
required off-street parking spaces.
6
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
4. The portable structures shall comply with Building Code in accord with Title 7
of the Meridian City Municipal Code.
G,
Additional standards for education institution, private: The applicant shall provide
written documentation that the facility meets the minimum site area guidelines as
established by the Idaho State Department of Education,
H,
Additional standards for Vocational or Trade Schools: The applicant shall provide
written documentation that the school will have a major curriculum relating to
technological industrial research and processes.
11-4-3,15: EQUIPMENT RENTAL, SALES AND SERVICE: All repair activities
(including, but not limited to, open pits and lifts) shall occur within an enclosed structure.
11-4-3,16:
ENTERTAINMENT ESTABLISHMENT, ADULT:
A.
Separations. In recognition of Idaho Code, the following distance separations
shall be required:
1, No adult entertainment establishment shall be allowed within one thousand
feet (1,000) of the following:
a, an existing adult entertainment establishment;
b. a church or place of religious worship,
c, any youth organization, school, or school bus stop, and
d. any residential district boundary.
2. The applicant shall provide evidence certified by a professional land surveyor
licensed in the State of Idaho that the proposed adult entertainment
establishment conforms to the separation requirements of this Subsection,
B.
Signs.
1. All adult entertainment establishments shall comply with the regulations of
Chapter 4, Article I of this Title. Further, signs for adult entertainment
establishments shall not contain any emphasis, either by movement, picture, or
otherwise, on matter relating to adult entertainment as herein defined,
7
Chapter 4 SPECIFIC USE STANDARDS
A.
8
8/29/05
2, Any business providing adult entertainment or adult material shall have in
place at each entrance to such business a legible door sign (as defined herein)
stating "Persons under 18 years of age not permitted," The sign shall be no
less than 0,5 square feet and no greater than one (1) square foot in area, Such
sign shall not require administrative approval in accord with Chapter 4, Article I,
Signs.
C.
The applicant shall obtain and/or maintain a license in accord with Title 3,
Chapter 10 of the Meridian City Code,
11-4-3,17:
FINANCIAL INSTITUTION:
A.
The location, access and safety features of all automated teller machines
(ATM's) shall be subject to review and approval by the Meridian Police
Department, and in accord with the standards set forth in Sections 11-3A-11 of
this Title,
B.
All A TMs shall be deemed an accessory use to a financial institution,
11-4-3.18: FLEX SPACE: Retail use shall not exceed twenty five percent (25%) of
leasable area in any tenant space.
11-4-3.19:
FOOD PRODUCTS PROCESSING:
A.
All structures, loading areas, outdoor activity areas, exclusive of parking shall be
located a minimum of six hundred feet (600') from any abutting residential
districts. .
B,
Food processing shall be located a minimum of one thousand feet (1,000') from
any hospital.
C,
The application materials shall include written documentation that the proposed
facility meets any applicable federal, state, or local standards regarding such use
including, but not limited to, those of the U, S. Environmental Protection Agency,
the U, S, Department of Agriculture, Idaho Department of Environmental Quality
(DEQ), Idaho Department of Agriculture, Idaho Department of Water Resources,
and Central District Health Department.
11-4-3.20:
FUEL SALES FACILITY AND FUEL SALES FACILITY, TRUCK STOP:
General standards:
1, When allowed as an accessory use, gasoline or diesel fuel sales facilities shall
not occupy more than twenty-five percent (25%) of the subject property.
2. The total height of any overhead canopy or weather protection device shall not
exceed twenty feet (20').
Chapter 4 SPECIFIC USE STANDARDS
D.
E.
F.
G,
9
8/29105
3. Vehicle stacking lanes shall be available on the property but outside the fueling
areas. Stacking lanes shall have sufficient capacity to prevent obstruction of
the public right-of-way by patrons. Such stacking lanes shall be separate from
areas required for access and parking, The stacking lanes shall not be located
within ten feet (10') of any abutting residential districts.
4. If the use is unattended, the standards in accord with Section 11-3A-11 of this
Title shall also apply,
B.
Additional standards for fuel sales facility, truck stop:
1. The use shall be located on a principal arterial or near an interstate
interchange,
2, The use shall be located a minimum of six hundred feet (600') from any
residential district and a minimum of one thousand feet (1,000') from any
hospital.
1.1-4-3,21: HOME OCCUPATION: The following standards apply to all home
occupation uses with the exception that strict adherence to the standards contained in
sections 11-4-3,218, 11-4-3.21C, 11-4-3.21E, and 11-4-3.21F in the TN-C and TN-R
Districts is not required:
A.
In no way shall the home occupation cause the premises to differ from its
residential character in the appearance, lighting, signs, or in the emission of
noise, fumes, odors, vibrations, or electrical interference,
B.
The home occupation shall be conducted entirely in the dwelling, and not more
than twenty-five percent (25%) of the gross floor area of said dwelling shall be
used for a home occupation or for storing goods associated with the home
occupation. Materials may be stored in an attached garage or storage area,
provided it shall not reduce the required off-street parking below the standard
established for that district.
C,
No activity connected to the home occupation or any storage of goods,
materials, or products connected with a home occupation shall be allowed in any
detached accessory structure,
The home occupation shall not involve the use of more than one (1) commercial
vehicle,
The home occupation shall not have more than two (2) out-going pickups per
day from a common carrier,
The home occupation shall be conducted by the inhabitants of the dwelling, and
no more than one (1) nonresident employee shall be permitted.
The home occupation shall not serve as a headquarters or main office where
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
employees come to the site and are dispatched to other locations.
H.
No retail sales shall be permitted from the dwelling except the sale of: a) services
or items produced or fabricated on the premises as a result of the home
occupation; or b) products related to the home occupation.
I.
Off-street parking shall be provided as Section 11-3C-6 of this Title, in addition to
the required off-street parking for the dwelling,
J.
All visits by clients, customers, and/or employees shall occur between the hours
of 8:00 a.m, and 8:00 p.m,
11-4-3,22:
HOSPITAL:
A.
If the hospital provides emergency care, the location shall have direct access on
an arterial street.
B.
Accessory retail uses including but not limited to, retail shops, food or beverage
service, and personal service shops, may be allowed if designed to serve
patrons of the hospital and their visitors only,
C.
No hospital shall be located within one thousand feet (1,000') of the following
uses: explosive manufacturing or storage, flammable substance storage,
foundry, freight and truck terminal, manufacture or processing of hazardous
chemicals, power plant, food product storage and processing plant.
11-4-3,23:
HOTEL OR MOTEL:
A.
Accessory uses including but not limited to restaurants, retail, drinking
establishments, and personal services, may be allowed if such uses are
completely within the hotel or motel structure, A drinking establishment shall
require separate or concurrent approval subject to the regulations of Section 11-
4-3,10 of this Title.
B,
A Conditional Use Permit shall be required for any hotel or motel use that adjoins
a residential district or an existing residence.
11-4-3,24:
INDUSTRY, INFORMATION:
A.
The following adverse effects shall be mitigated through setbacks, buffers,
sound attenuation and/or hours of operation:
1. Noise, odor, or vibrations; or direct or reflected glare detectable by the human
senses without the aid of instruments,
2, Any other emission or radiation that endangers human health, results in
damages to vegetation or property or which exceed health and safety
standards.
10
Chapter 4 SPECIFIC USE STANDARDS
C.
D,
8/29/05
B,
The application materials shall include written statement that the proposed
facility meets any applicable federal, state, or local standards regarding such
use, including but not limited to, those of the U,S, Environmental Protection
Agency, the U. S, Department of Agriculture, Central District Health Department,
Ada County Air Quality Board and Idaho Department of Water Resources.
11-4-3,25:
INDUSTRY, LIGHT AND HEAVY:
A.
All mechanical equipment emissions; shipping and/or delivery; or other outdoor
activity areas shall be located a minimum of three hundred feet (300') from any
abutting residential districts, or the use is subject to a Conditional Use Permit.
B.
The application shall identify how the proposed use will address the impacts of
noise and other emissions on adjoining residential districts. More specifically, the
following adverse effects shall be mitigated through setbacks, buffers, sound
attenuation and/or hours of operation:
1, Noise, odor, or vibrations; or direct or reflected glare detectable by the human
senses without the aid of instruments.
2, Radioactivity and electric or electromagnetic disturbances that unduly interfere
with the normal operation of equipment, instruments, or appliances on abutting
properties.
3, Any other emission or radiation that endangers human health, results in
damages to vegetation or property or which exceeds health and safety
standards.
4. In the event that the Director determines that the applicant cannot adequately
address such impacts, the use shall be subject to conditional use approval.
Additional standards for industry, heavy: The use shall be located a minimum of
one thousand feet (1,000') from a hospital.
The application materials shall include written statement that the proposed
facility meets any applicable federal, state, or local standards regarding such use
including, but not limited to those of the U,S. Environmental Protection Agency,
the U, S. Department of Agriculture, Central District Health Department, the Ada
County Air Quality Board and Idaho Department of Water Resources.
11-4-3,26: LAUNDROMAT: The hours of operation shall be limited to between 6:00
a.m, and 11 :00 p.m. in the C-N and L-Q Districts. If unattended, the use shall meet the
requirements of section 11-3A-11 SELF-SERVICE USES,
11-4-3.27: MULTIFAMILY DEVELOPMENT: Multifamily developments with multiple
properties shall be considered as one property for the purpose of implementing the
standards set forth in this section.
11
Chapter 4 SPECIFIC USE STANDARDS
12
8/29/05
A.
Purpose:
1, To create multifamily housing that is safe and convenient and that enhances
the quality of life of its residents,
2, To create quality buildings and designs for multifamily development that
enhance the visual character of the community.
3, To create building and site design in multifamily development that is sensitive
to and well integrated with the surrounding neighborhood,
4, To create open space areas that contribute to the aesthetics of the community,
provide an attractive setting for buildings, and provide safe, interesting outdoor
spaces for residents.
B.
Site design
1. Setbacks: Buildings shall provide a minimum setback of ten feet (10') unless a
greater setback is otherwise required by this Title. Building setbacks shall take
into account windows, entrances, porches and patios, and how they impact
adjacent properties
2, All on-site service areas, outdoor storage areas, waste storage, disposal
facilities, and transformer and utility vaults shall be located in an area not
visible from a public street, or shall be fully screened from view from a public
street. .
3, A minimum of eighty (80) square feet of private, usable open space shall be
provided for each unit. This requirement can be satisfied through porches,
patios, decks, and/or enclosed yards, Landscaping, entryway and other access
ways shall not count toward this requirement.
4, For the purposes of this Section, vehicular circulation areas, parking areas,
and private useable open space shall not be considered common open space.
5. No recreational vehicles, snowmobiles, boats or other personal recreation
vehicles shall be stored on the site unless provided for in a separate,
designated and screened area,
6, The parking shall meet the requirements set forth in Chapter 3 REGULATIONS
APPLYING TO ALL DISTRICTS of this Title,
7, Developments with twenty (20) units or more shall provide the following:
a. A property management office,
b, A maintenance storage area.
Chapter 4 SPECIFIC USE STANDARDS
13
8/29/05
c, A central mailbox location, including provisions for parcel mail, that provide
safe pedestrian and/or vehicular access,
d, A directory and map of the development at an entrance or convenient
location for those entering the development.
C,
Common open space design requirements:
1, A minimum area of outdoor common open space shall be provided as follows:
a, One hundred fifty (150) square feet for each unit containing five hundred
(500) or less square feet of living area.
b. Two hundred fifty (250) square feet for each unit containing more that five
hundred (500) square feet and up to one thousand two hundred (1,200)
square feet of living area.
c, Three hundred fifty (350) square feet for each unit containing more than one
thousand two hundred (1,200) square feet of living area.
2, Common open space shall be not less than four hundred (400) square feet in
area, and shall have a minimum length and width dimension of twenty feet
(20').
3, In phased developments, common open space shall be provided in each
phase of the development consistent with the requirements for the size and
number of dwelling units,
4. Common open space areas shall not be adjacent to collector or arterial streets
unless separated from the street by a constructed barrier at least four feet (4')
in height.
0,
Site development amenities:
1, All multifamily developments shall provide for quality of life, open space and
recreation amenities to meet the particular needs of the residents as follows:
a, Quality of life
i.
Clubhouse
ii. Fitness facilities
Hi. Enclosed bike storage
iv. Public art such as a statue
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
b. Open space
i.
Open grassy area of at least fifty (50) by one hundred (100) feet in size
ii. Community garden
iii. Ponds or water features
iv. Plaza
c. Recreation
i.
Pool
ii. Walking trails
iii. Children's play structures
iv. Sports courts
2. The number of amenities shall depend on the size of multifamily development
as follows:
a, For multifamily developments with less than twenty (20) units, two (2)
amenities shall be provided from two separate categories.
b. For multifamily development between twenty (20) and seventy-five (75) units,
three (3) amenities shall be provided, with one (1) from each category.
c. For multifamily development with seventy-five (75) units or more, four (4)
amenities shall be provided, with at least one (1) from each category.
d. For multifamily developments with more that one hundred (100) units, the
decision-making body shall require additional amenities commensurate to the
size of the proposed development.
3. The decision-making body shall be authorized to consider other improvements in
addition to those provided under subsection 0, provided that these
improvements provide a similar level of amenity.
14
Chapter 4 SPECIFIC USE STANDARDS
15
8/29/05
E.
Architectural character
1, All building elevations shall have a minimum portion of the elevation devoted to
architectural features designed to provide articulation and variety, These
features shall include, but are not limited to windows, bays and offsetting walls
that extend at least two (2) feet; recessed entrances; and changes in material
types, Changes in material types shall have a minimum dimension of two feet
(2') and minimum area of twenty-five (25) square feet.
2. Main entrances, which are the primary point(s) of entry where the majority of
building users will enter and leave, shall be designed as an obvious entrance
and focal point of the building through architectural treatment, lighting, and
address identification,
3, Entrances shall be adequately covered, recessed, or treated with a permanent
architectural feature in such a way that weather protection is provided.
4. Roof forms shall be distinctive and include variety and detail when viewed from
the street. Sloped roofs shall have a significant pitch. Flat roofs should include
distinctive cornice treatments.
5, Exterior building materials and finishes shall convey an impression of
permanence and durability, Materials such as masonry, stone, stucco, wood,
terra cotta, and tile are encouraged,
6. Windows are required to allow views to exterior activity areas or vistas.
Windows shall be provided on any building facing any common area used for
children's recreation,
7. All roof and wall-mounted mechanical, electrical, communications, and service
equipment should be screened from public view from the adjacent public
streets and properties by the use of parapets, walls, fences, enclosures, or by
other suitable means,
F,
Landscaping requirements
1. Development shall meet the minimum landscaping requirements in accord with
Chapter 3 REGULATIONS APPLYING TO ALL DISTRICTS of this Title,
2, All street-facing elevations shall have landscaping along their foundation, The
foundation landscaping shall meet the following minimum standards:
a, The landscaped area shall be at least three (3) feet wide,
b. For every three (3) lineal feet of foundation, an evergreen shrub having a
minimum mature height of twenty-four (24) inches shall be planted.
Chapter 4 SPECIFIC USE STANDARDS
A.
B,
16
8/29/05
c. Groundcover plants shall be planted in the remainder of the landscaped
area.
G.
All multifamily developments shall record legally binding documents that state
the maintenance and ownership responsibilities for the management of the
development, including but not limited to structures, parking, common areas, and
other development features,
11-4-3,28:
NURSERY OR URBAN FARM:
A.
Sales of agricultural products or live plant material shall be incidental to
agricultural production and shall be limited to what is grown on the property.
B.
For new uses, the property used for nursery or urban farm shall be five (5) acres
or less. For annexation of existing nursery or urban farm use, the property may
be larger.
11-4-3,29:
NURSING OR RESIDENTIAL CARE FACILITIES:
General standards:
1. If the use results in more than ten (10) persons occupying a dwelling at any
one time, the applicant or owner shall concurrently apply for a change of
occupancy as required by the Building Code in accord with Title 7 of the
Meridian City Municipal Code,
2, The owner and/or operator of the facility shall secure and maintain a license
from the State of Idaho Department of Health and Welfare-Facility Standards
Division
Additional standards for uses providing care to children and juveniles under the
age of eighteen (18) years:
1. All outdoor play areas shall be completely enclosed by a minimum six-foot (6')
non-scalable fence to secure against exit/entry by small children and to screen
abutting properties, The fencing material shall meet the swimming pool fence
requirements of the Building Code in accord with Title 7 of the Meridian City
Municipal Code.
2. Outdoor play equipment over six feet (6') high shall not be located in a front
yard or within any required yard.
3. Outdoor play areas in residential districts or uses adjacent to an existing
residence shall not be used after dusk,
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
C.
Additional standards for uses providing care to patients who suffer from
Alzheimer's disease, dementia or other similar disability that may cause
disorientation: A barrier with a minimum height of six feet (6'), along the
perimeter of any portion of the site that is accessible to these patients shall be
provided. The fencing material shall meet the swimming pool fence requirements
of the Building Code in accord with Title 7 of the Meridian City Municipal Code.
11-4-3.30:
PUBLIC OR QUASI-PUBLIC USE:
A.
Public recreation and community centers: the use shall meet the standards in
accord with Section 11-3-3,3 arts, entertainment or recreation facility, of this
Article,
B,
Public or quasi-public office: the use shall meet the standards for office use in
accord with the district in which the use is located.
11-4-3,31:
PUBLIC UTILITY, MAJOR; AND PUBLIC INFRASTRUCTURE:
A.
Accessory uses directly related to the maintenance and fueling of vehicles
(including, but not limited to, truck and trailer washing, fuel pumps, garages for
minor repair) may be allowed,
B,
Installation of underground fuel tanks shall require written approval from the
Idaho Division of Environmental Quality, Idaho Department of Water Resources,
and the appropriate Fire Authority,
C,
No portion of the outside storage areas and/or outside activity areas may be
visible from any highway, interstate, gateway corridor, principal arterial, or minor
arterial as herein defined.
D,
All driveways into and through the facility and any open area with a driving
surface shall be surfaced with a dustless material including, but not limited to,
asphalt, concrete, pavers or bricks.
E.
For any use requiring the storage of fuel or hazardous material, the use shall be
located a minimum of one thousand feet (1,000') from a hospital.
11-4-3.32:
A.
B.
17
RECYCLING CENTER; AND SOLID WASTE TRANSFER STATION:
The site shall be screened from the street(s) by a screen composed of a
masonry or concrete wall planted on the exterior side with a vegetative screen.
The screen shall be of sufficient height so that no storage containers shall be
visible above the required screening.
All grounds and facilities shall be maintained in an orderly manner so as not to
create a public nuisance,
Chapter 4 SPECIFIC USE STANDARDS
D.
18
8/29/05
C,
All mechanical equipment emissions; power-driven processing (including, but not
limited to, aluminum foil and can compacting, baling, plastic shredding, or other
processing activities necessary for efficient temporary storage and shipment of
materials); and/or other outdoor activity areas shall be located a minimum of
three hundred feet (300') from any abutting residential districts, If the use does
not meet the minimum setback, or in the opinion of Director there are questions
regarding the adequacy of the mitigation of noise, emissions and lor blowing
debris from the site, the use shall be subject to a Conditional Use Permit.
D,
All driveways into and through the facility and any open area with a driving
surface shall be surfaced with a dustless material including, but not limited to,
asphalt, concrete, pavers or bricks,
E.
For any use requiring the storage of fuel or hazardous material, the use shall be
located a minimum of one thousand feet (1,000') from a hospital.
F,
Additional standards for recycling centers:
1, Any container provided for after-hours donation of recyclable materials shall be
a minimum of fifty feet (50') from any abutting residential district, shall be of
sturdy, rustproof construction, and shall have sufficient capacity to
accommodate materials collected,
2. Except for after-hours donation containers, no unsorted material shall be
stored outside.
11-4-3,33:
STORAGE FACILITY, OUTSIDE:
A.
Materials shall not be stored within the required yards. Stored items shall not
block sidewalks or parking areas and may not impede vehicular or pedestrian
traffic.
B,
The site shall not be used as vehicle wrecking or junkyard as herein defined,
C,
Additional standards for outside storage as an accessory use, Accessory outside
storage shall be allowed for approved uses subject to the following standards:
1. Outside storage of materials for commercial or industrial uses shall be limited
to those items owned or used by the business,
2. Outside storage of materials for a residential development or recreational
vehicle park shall be only for recreational vehicles or personal recreation items
of the owners and/or tenants.
3. Outside storage of materials for individual residential properties shall be
screened with a six-foot (6') site-obscuring fence,
For any use requiring the storage of fuel or hazardous material, the use shall be
Chapter 4 SPECIFIC USE STANDARDS
J,
K.
L.
19
8/29105
located a minimum of one thousand feet (1,000') from a hospital.
11-4-3.34:
STORAGE FACILITY, SELF-SERVICE:
A
Storage units and/or areas shall not be used as dwellings or as a commercial or
industrial place of business. The manufacture or sale of any item by a tenant
from or at a self-service storage facility is specifically prohibited.
B,
On-site auctions of unclaimed items by the storage facility owners shall be
allowed as a temporary use in accord with Section 11-3E temporary use
requirements of this Title,
C,
The distance between structures shall be a minimum of twenty-five feet (25').
0,
The storage facility shall be completely fenced, walled, or enclosed and
screened from public view, Where abutting a residential district or public road,
chain-link shall not be allowed as fencing material.
E.
If abutting a residential district, the facility hours of public operation shall be
limited to 6:00 a.m. to 11 :00 p,m.
F,
No structure, facility, drive lane, parking area, nor loading area shall be located
adjacent to a residential district without a sound attenuation wall.
G,
If the applicant provides a sound attenuation wall, landscaping buffers may be
reduced to ten feet (10').
H.
If the use is unattended, the standards in accord with Section 11-3A-16 self
service uses of this Title shall also apply.
I.
The facility shall have a second means of access for emergency purposes.
All outdoor storage of material shall be maintained in an orderly manner so as
not to create a public nuisance. Materials shall not be stored within the required
yards. Stored items shall not block sidewalks or parking areas and may not
impede vehicular or pedestrian traffic,
The site shall not be used as vehicle wrecking or junkyard as herein defined,
For any use requiring the storage of fuel or hazardous material, the use shall be
located a minimum of one thousand feet (1,000') from a hospital.
Chapter 4 SPECIFIC USE STANDARDS
A.
B.
20
8/29/05
11-4-3,36:
TERMINAL, FREIGHT OR TRUCK:
A.
The use shall be located with direct access on a principal arterial or near an
interstate interchange, and with no access through residential streets.
8,
No outdoor activity area shall be located within three hundred feet (300') from
any residential district.
C.
The use shall be located a minimum of one thousand feet (1,000') from any
hospital.
D,
Accessory uses directly related to the maintenance and fueling of vehicles
(including, but not limited to, truck and trailer washing, fuel pumps, garages for
minor repair) may be allowed,
E.
Installation of underground fuel tanks shall require written approval from the
Idaho Division of Environmental Quality, Idaho Department of Water Resources,
and the Meridian City Fire Department.
11-4-3.37:
VEHICLE IMPOUND YARD:
A.
Outside storage and outside activity areas shall comply with Section 11-3A-
14outdoor storage of this Title. The closed vision fence or wall and screening
materials shall be a minimum of ten feet (10) in height.
8,
No portion of the vehicle impound yard, outside storage areas and/or outside
activity areas may be visible from any highway, interstate, gateway corridor,
principal arterial, or minor arterial as herein defined,
C,
All materials or parts shall be stored and located within the closed vision fence or
walled area, No vehicles or materials shall be stored so they exceed the height
of the fence or wall.
D,
The use shall not constitute a junkyard as herein defined.
11-4-3.38:
VEHICLE REPAIR, MAJOR AND MINOR:
Where adjoining a residential property or district, all repair activities (including,
but not limited to, open pits and lifts) shall occur within an enclosed structure.
Inoperable or dismantled motor vehicles shall be stored behind a closed vision
fence, wall, or screen or within an enclosed structure and shall not be visible
from street.
Chapter 4 SPECIFIC USE STANDARDS
0,
21
8/29/05
11-4-3,39:
VEHICLE SALES OR RENTAL:
A.
Vehicle repair may be allowed as an accessory use, subject to the standards for
vehicle repair, major and minor in the district where the use'is located.
B.
Inoperable or dismantled motor vehicles shall be stored behind a closed vision
fence. wall, or screen or within an enclosed structure and shall not be visible
from any street.
C.
Automotive sales and rental areas shall be subject to the minimum perimeter
landscape requirement of parking areas in Chapter 3 Article B. landscaping
requirements of this Title.
0,
In addition to Chapter 3 Article B. landscaping requirements of this Title, one (1)
square foot of landscaping for every fifty (50) square feet of vehicle display area,
and one (1) tree for every two hundred (200) square feet of parking area shall be
provided,
11-4-3.40:
VEHICLE WASHING FACILITY:
A.
A site plan shall be submitted that demonstrates safe pedestrian and vehicular
access and circulation on the site and between adjacent properties. At a
minimum, the plan shall demonstrate compliance with the following standards:
1, Stacking lanes shall have sufficient capacity to prevent obstruction of the
public right-of-way by patrons.
2, The stacking lane shall be a separate lane from the circulation lanes needed
for access and parking.
3, The stacking lane shall not be located within ten feet (10') of any residential
district or existing residence.
4, A letter from the Transportation Authority indicating the site plan is in
compliance with the highway district standards and policies shall be required,
B,
Within the industrial districts, a vehicle washing facility shall be allowed only as
an accessory use to a gasoline or diesel fuel sales facility for use by non-
passenger vehicles, The vehicle washing facility shall be limited in capacity to a
single vehicle, The intent is to discourage facilities that cater to passenger
vehicles.
C,
Any use that is not fully enclosed shall be located a minimum one hundred feet
(100') from any abutting residential district, and shall be limited in operating
hours from 6:00 a.m, to 11 :00 p.m,
If the use is unattended, the standards set forth in Section 11-3A-18 of this Title
shall also apply.
Chapter 4 SPECIFIC USE STANDARDS
A.
B.
C,
22
8/29105
11-4-3.41 :
VEHICLE WRECKING OR JUNKY ARD:
A.
Outside storage and outside activity areas shall comply with Section 11-3A-14
outdoor storage of this Title, The fence or wall and screening materials shall be a
minimum of ten feet (10) in height.
B,
No portion of the vehicle impound yard, outside storage areas and/or outside
activity areas may be visible from any highway, interstate, principal arterial, or
minor arterial.
C,
All materials or parts shall be stored and located within a closed vision fence or
walled area, No vehicles or materials shall be stored so they exceed the height
of the fence or wall.
0,
All structures or outside activity areas shall be located a minimum of three
hundred feet (300') from any property line. The use shall be located a minimum
of one thousand feet (1,000') from any residential district.
E.
An area for processing vehicles as they are brought to the site shall be
designated on a site plan. The processing area shall be an impermeable surface
that has a means to collect and properly dispose of oils and fluids in the vehicles,
F,
The applicant shall obtain all necessary permits for the storage of materials on
the site, including, but not limited to, oil, hazardous waste, and tires,
G.
No person shall establish, operate, or maintain a vehicle wrecking yard, any
portion of which is within one thousand feet (1,000') of the nearest edge of the
right-of-way and visible from any highway, interstate, principal arterial, or minor
arterial as herein defined. See Idaho Code §40-313,
11-4-3.42:
VERTICALLY INTEGRATED RESIDENTIAL PROJECT:
A vertically integrated residential project shall be a structure that contains at least
two (2) stories.
A minimum of twenty five percent (25%) of the gross floor area of a vertically
integrated project shall be residential dwelling units, including outdoor patio
space on the same floor as a residential unit.
The minimum building footprint for a detached vertically integrated residential
project shall be twenty-four hundred (2,400) square feet.
Chapter 4 SPECIFIC USE STANDARDS
23
8/29/05
0,
The allowed nonresidential uses in a vertically integrated project include: arts,
entertainment or recreation facility; artist studio; civic, social or fraternal
organizations; day care facility; drinking establishment; Education Institution;
financial institution; health care or social assistance; industry, craftsman;
laundromat; nursing or residential care facility; personal or professional service;
public or quasi-public use; restaurant; or retail; or other uses that may be
considered through the Conditional Use Permit process.
E.
None of the required parking shall be located in the front of the structure.
11-4-3.43:
WAREHOUSE:
A.
Accessory uses allowed: office not to exceed twenty five percent (25%) and retail
sales not to exceed ten percent (10%) of the total enclosed area of the use.
B,
Outside activity areas shall be located a minimum of three hundred feet (300')
from any property line adjoining a residence or a residential district
11-4-3.44:
WIRELESS COMMUNICATION FACILITY:
A.
Purpose: The purpose of this section is to accommodate the communications
needs of its residents and businesses while at the same time protecting the
safety, aesthetic appeal and general welfare of the community. Furthermore, it is
the purpose of this section to regulate the impact of communications towers
within the city limits and to provide for the needs of the public and businesses for
wireless communications. The intent of this section is to:
1, Facilitate the provision of wireless telecommunication services to the residents
and businesses of the City of Meridian;
2. Minimize the adverse visual effects of communications towers and other similar
structures through careful design standards;
3, Avoid potential damage to adjacent properties from the structural failure of
towers and other such structures through structural standards and setback
requirements; and
4. Require the co-location of new wireless communication equipment, when
possible, in order to reduce the number of towers required to serve the city,
B,
Applicability: The following provisions shall apply to any construction, installation,
addition to or increase in the height of any wireless communications tower,
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
C,
Process:
1, Amateur radio antennae that meet the standards as set forth in Section 11-4-
3.44,F shall require accessory use approval.
2, Co-location of new equipment on an existing tower shall require a Certificate of
Zoning Compliance prior to installation.
3, Stealth towers and/or new antennae that meet the standards as set forth in
Chapter 5 Article B. SPECIFIC PROVISIONS shall require a Certificate of Zoning
Compliance prior to installation.
4, Wireless communication facilities in an industrial district shall require a
Certificate of Zoning Compliance prior to installation,
5. All other wireless communication facilities shall require conditional use
approval.
D,
Required documentation: The applicant shall provide the following
documentation with the request for approval of a wireless communication facility:
1, Documentation from a qualified and licensed engineer showing that the
proposed facility will be in compliance with the FCC standards regarding radio
frequency (RF) emissions.
2, A report from a qualified and licensed structural engineer that describes the
tower height and design. The report shall include the following: a cross section
of the tower, elevations that document the height above grade for all potential
mounting positions for colocated antennae, and the minimum separation
distances between antennae, The report must also include a description of the
tower's capacity regarding the number and type of antennae that it can
accommodate and what precautions the applicant will take to avoid
interference with established public safety telecommunications, This report
must be stamped by the structural engineer and include other information
necessary to evaluate the request.
3. For all wireless communication facilities, a letter of intent committing the tower
owner and his, her or its successors to allow the shared use of the tower, as
required by this section, if an additional user agrees in writing to meet
reasonable terms and conditions for shared use.
4, A statement regarding compliance with regulations administered and enforced
by the Federal Aviation Administration (FAA).
5. Propagation charts showing existing and proposed transmission coverage at
the subject site and within an area large enough to provide an understanding
of why the facility needs to be in the chosen location,
24
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
6. A written analysis demonstrating that the proposed site is the most appropriate
site within the immediate area, The analysis shall include, but is not limited to,
the following:
a, Description of the surrounding area, including topography;
b. Natural and manmade impediments, if any, that would obstruct adequate
wireless telephone transmissions;
c. Physical site constraints, if any, that would preclude construction of a
wireless communications facility on any other site;
d. Technical limitations of the system that limit siting options.
E.
Amateur radio antenna standards: Pursuant to the FCC's preemptive ruling PRB
1, towers supporting amateur radio antennae (Le" HAM radio antennae) of less
than thirty-five feet (35') in height are permitted, antennae with a height in excess
of thirty-five feet (35') shall require a Conditional Use Permit. No towers or
antennae shall be placed within the front, side or street side yard.
F,
Stealth tower standards:
1, The facility shall be hidden or camouflaged,
2, The facility shall not exceed the height limitation of the district in which it is
located,
G,
Antennae standards:
1, The antennae shall be less than four (4) square feet in area and mounted to:
a, New poles (not streetlights),
b. Existing poles or streetlights,
c, Buildings.
d. Towers,
e, New streetlights in existing neighborhoods shall only be allowed with
approval of the Public Works Director. The Public Works Director shall
determine if the benefit derived from the new streetlight is greater than the
maintenance and increased utility fees associated with the streetlight.
2. The facility shall not exceed the height limitation of the district in which it is
located.
25
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
3. Where the applicant does not own the supporting structure, antennae attached
to support structures shall be allowed only after securing a license agreement
with the owner and other responsible parties, as applicable,
4, Streetlights or poles with attached antennae shall be separated by a minimum
of five hundred feet (500'),
5, Antennae attached to streetlights shall be painted to match the streetlights and
shall be attached only to Meridian standard streetlights (not on ornamental
fixtures ),
H,
Design Standards: All new communications towers shall meet the following
minimum design standards:
1, Towers and antennae shall be required to blend into the surrounding
environment by paint or other camouflaging architectural treatment, except in
instances where the color is dictated by federal or state authorities such as the
federal aviation administration, All metal shall be corrosive-resistant or treated
to prevent corrosion,
2, All new communication towers shall be of monopole design, unless the
decision-making body determines that an alternative design (Le" lattice, guy
wire, etc.) would be appropriate because of location or necessity.
3. No part of any antenna, disk, array or other such item attached to a
communications tower shall be permitted to overhang any part of the right-of-
way or property line.
4. The base of all towers shall be surrounded by a sight obscuring security fence,
in accord with the underlying zone.
5, All tower facilities shall include a landscape buffer. The buffer shall consist of a
landscape strip of at least five feet (5') wide outside the perimeter of the
compound. A minimum of fifty percent (50%) of the plant material shall be of
an evergreen variety. In locations of where the visual impact of the tower is
minimal, the Director may waive this requirement through the alternative
compliance procedure in accord with Chapter 5 ADMINISTRATION of this Title.
6. All climbing pegs within the bottom twenty feet (20') of the tower shall be
removed except when the tower is being serviced.
7, All lighting on the tower, other than may be required by the FAA, shall be
prohibited.
8, No tower shall have constructed thereon, or attached thereto, in any way, any
platform, catwalk, crow's nest, or like structure, except during periods of
construction or repair. No signs or banners shall be attached to any portion of
a wireless communications tower,
26
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
I.
Setback standards: If the tower does not exceed the maximum building height
allowed for the zoning of the land upon which it is to be placed, the tower shall
meet the setback requirement for that zone, with the following exceptions:
1. If the property is located next to a residential district, the setback requirements
shall be one hundred twenty-five percent (125%) of the height of the tower,
a. If the tower exceeds the maximum height allowance for the district, the
setback requirements shall be one foot (1') for every ten feet (10') of tower
height, in addition to the district's setback requirements.
b, If the tower is not constructed to meet the standards set forth in the
Telecommunications Industry Association/Electronic Industries Association
(TINEIA) 222 revision F standards entitled "Structural Standards for Steel
Antenna Supporting Structures" the setback requirement shall be one foot
(1') for every foot in height of the tower, This shall be measured from all
property lines and shall be referred to as the "fall zone." Only the accessory
equipment building shall be permitted to be located within the fall zone,
2. Communication towers must be set back from all public owned right-of-way by
a minimum of two (2) times the height of the tower to be installed, If this
setback requirement is in conflict with any other setback requirement, the
setback shall be the greater distance,
3, All communication towers shall be set back at least three (3) times the height
of the tower from all principal arterial streets,
J.
Co-location Standards:
1, A proposal for a new commercial communication tower shall not be approved
unless the decision-making body finds that the telecommunications equipment
planned for the proposed tower cannot be accommodated on an existing or
approved tower,
2, It shall be the burden of the applicant to demonstrate that the proposed tower
or antenna cannot be accommodated on an existing or approved tower or
structure. One or more following pieces of documentation shall be provided as
proof that the new tower is necessary:
a, Unwillingness of other tower or facility owners to entertain shared use,
b, The proposed co-location of an existing tower or facility would be in violation
of any state or federal law.
c. The planned equipment would exceed the structural capacity of existing
towers, as documented by a qualified and licensed structural engineer,
27
Chapter 4 SPECIFIC USE STANDARDS
28
8/29105
d, The planned equipment would cause interference, materially impacting the
usability of other existing or planned equipment on the tower as documented
by a qualified and licensed engineer,
e, Existing or approved towers cannot accommodate the planned equipment at
a height necessary to function reasonably as documented by a qualified and
licensed engineer,
3, All proposed communication towers shall be designed (structurally, electrically,
and in all respects) to accommodate both the applicant's antennae and
comparable antennae for at least two (2) additional users if the tower is over
one hundred ten feet (110') in height and for at least one (1) additional user if
the tower is over fifty feet (50') in height.
K.
Abandoned or unused towers or portions of towers: All abandoned or unused
towers and associated facilities shall be required to be removed within sixty (60)
days of cessation of use as a wireless communication facility, unless a time
extension is granted by the city council. A copy of the relevant portions of a
signed lease, which requires the applicant to remove the tower and associated
facilities upon cessation of the use as a wireless communication facility, shall be
submitted at the time of application and resubmitted upon renewal or
termination, In the event that the tower and associated facilities are not removed
within the sixty (60) days, the tower and associated facilities may be removed by
the city and the costs of removal assessed against the real property.
Chapter 4 SPECIFIC USE STANDARDS
8/29/05
CHAPTER 5
ADMINISTRATION
SECTIONS:
11-5-1: PURPOSE
11.5-2: APPLICABILITY
11.5-1: PURPOSE: The purpose of this Chapter is to set forth the roles,
responsibilities and processes in the administration of permits that are authorized by this
Title and consistent with Idaho Code §67-6502 et seq, as amended,
11-5-2:
APPLICABILITY:
A.
All applications shall be administered in accord with Article A. general provisions
of this Chapter.
B.
All applications shall be administered in accord with Article B. specific provisions
of this Chapter,
c,
Surety agreements shall be in accord with Article C, surety agreements of this
Chapter.
1
Chapter 5 ADMINISTRATION
8/29/05
CHAPTER 5
ADMINISTRATION
ARTICLE A. GENERAL PROVISIONS
ARTICLE A.
11-5A-1 :
11-5A-2:
11-5A-3:
11-5A-4:
11-5A-5:
11-5A-6:
11-5A-7:
SECTIONS:
PURPOSE
DUTIES AND AUTHORITY
APPLICATION PROCESS
ADMINISTRATIVE PROCESS
PUBLIC HEARING PROCESS
CITY COUNCIL REVIEW PROCESS
FEES
11-5A-1: PURPOSE: The purpose of this Chapter is to set forth the roles,
responsibilities, and processes in the administration of permits that are authorized by
this Title consistent with Idaho Code §67-6502 et seq. as amended,
11-5A-2:
DUTIES AND AUTHORITY:
A.
City Council: The Meridian City Council shall have the authority to set policy and
legislation affecting land use and the administration of this Title. The City Council
shall act on recommendations from the Planning and Zoning Commission in
legislative and quasi-judicial matters and serve as a review authority on appeals
of discretionary and administrative actions. (See Table 11-5A-1.)
8,
Planning and Zoning Commission: The Planning and Zoning Commission shall
be the designated planning agency for the City, The Planning and Zoning
Commission shall be responsible for final action on discretionary permits and for
recommendations to the City Council on land use legislation, comprehensive
plan amendments and quasi-judicial matters. In addition to the duties listed in
Title 1 of the Meridian City Code, the duties of the Planning and Zoning
Commission regarding implementation of this Title shall be as follows:
1, Provide for citizen meetings, hearings, surveys, or other methods to obtain
advice on the planning process, Comprehensive Plan, and implementation;
2, Conduct informational meetings and consult with public officials and agencies,
public utility companies, and civic, educational, professional, or other
organizations;
3, Promote a public interest in and understanding of the Commission's activities;
4. Make recommendations to the Council concerning the Comprehensive Plan,
planning process, or implementation of the Comprehensive Plan; and
Chapter 5 Article A, GENERAL PROVISIONS
8/29/05
5. Conduct public hearings and make recommendations based on the required
findings and standards to the City Council for applications in accord with Table
11-5A-1.
C.
Planning Department Director: The Director shall be appointed by the mayor and
confirmed by a majority of the City Council as the administrative official for the
Unified Development Code, The Director or his or her authorized staff shall
administer and enforce this Title and fulfill all the duties imposed by law
including, but not limited to:
1, The Director shall make interpretations in the enforcement and administration
of this Title (See Table 11-5A-1) including, but not limited to, those in Chapter
1 GENERAL PROVISIONS of this Title and the following:
a, Conduct investigations of structures and use of property as are necessary to
determine compliance with the regulations of this Title;
b, Order the abatement of violations of this Title and aid in prosecuting such
violations;
c. Withhold any Certificate of Zoning Compliances on any property where
structures or uses are in violation of the Unified Development Code; and
d. Enforce penalties for violations in accord with Section 11-1-11 of this Title,
2, The Director shall provide information to the public on planning, and zoning,
matters,
3. The Director with the City Clerk shall receive and examine applications
including, but not limited to, the following:
a, With the consent of the owner, enter upon any property to make
examinations and surveys;
b, Maintain records of all materials and correspondence related to land use
applications;
c, Transmit to outside agencies and provide written notice to surrounding
property owners on all Commission and Council hearings;
d. Maintain records of the Commission and Council hearings and actions
thereon;
e, Transmit to the Commission or Council all applications related to this Title.
4, The Director shall issue Certificates of Zoning Compliance.
2
Chapter 5 Article A. GENERAL PROVISIONS
8/29/05
5. The Director shall review and act on requests for Alternative Compliance as
identified in Table 11-58-1,
D.
The following is a summary list of the actions that the City shall take in
administration of this Title, the body responsible for the action, and reference to
the process under which the action shall be taken. In the case of concurrent
applications requiring action from more than one decision body, the applications
shall be combined and the decision-making body with the highest authority shall
be responsible for all decisions, This is not intended to require the Planning and
Zoning Commission to review applications where they are not listed as a
recommending body such as final plat, variance, and vacation,
TABLE 11-SA-1: DECISION-MAKING AUTHORITY BY APPLICATION
"'c.';':
N
N
NONE 0 A
NONE 0 A
NONE 0 A
PZ CC PH
NONE CC PH
NONE 0 A
NONE 0 A
PZ CC PH
0 PZ PH
roved conditional use NONE 0 A
NONE 0 A
PZ CC PH
PZ CC PH
0 CC PM
0 CC A
PZ CC PH
NONE 0 A
NONE 0 A
NONE 0 A
NONE 0 A
NONE 0 A
0 Same decision-maker PH
as initial a roval.
Unified develo ment code amendment PZ CC PH
Vacations, exempt per Idaho Code §50-1306A(5) NONE 0 A
all others 0 CC PM
Variance 0 CC PH
3
Chapter 5 Article A. GENERAL PROVISIONS
4
8/29/05
11-5A-3:
APPLICATION PROCESS:
A
Purpose: The purpose of this section is to outline the general application process
for a permit or decision under provisions of this Title,
8,
Application requirements:
1. All persons making application for permits and decisions in accord with this
Title shall submit an application to the Director on forms approved by the
Planning and Zoning Commission and provided by the Planning Department.
2. Prior to the commencement of any substantive changes to the application
requirements, Director shall submit the changes to the Planning and Zoning
Commission at a public hearing,
C,
Determination of completeness:
1, An application shall contain all information deemed necessary by the Director
to determine if the proposed permit or action will comply with the requirements
of the applicable district or development regulation,
2. Upon receipt of a compete application, the City will issue a notice of application
acceptance and completion,
3. The Director shall assign a file number and begin processing the application
once the application is deemed complete,
D.
Fee: All complete applications shall be accompanied by a filing fee in an amount
established by City ordinance or resolution,
E.
Resubmitted: No application that has been denied by the Director, the
Commission, or the Council shall be resubmitted, in substantially the same form
for the same use, within one (1) year from the date of denial. The Director may
waive the one- (1) year requirement and accept a new application, where the
subject property is affected by amendments to the Comprehensive Plan or to this
Title,
F,
Request for City Council review: The City Council may be asked to review any
decision of the Director or the Commission by an applicant, any party of a record
or a City Council member through the provisions set forth in Section 11-5A-6 city
council review process.
Chapter 5 Article A. GENERAL PROVISIONS
8/29/05
11-5A-4:
ADMINISTRATIVE PROCESS:
A.
The Director may require conditions of approval that are deemed necessary to
protect the public health, safety, and welfare and prevent undue adverse impacts
on surrounding properties,
B.
Where notice is required, the Director shall notify property owners within one
hundred feet (100') of the subject property.
C.
The Director shall provide the applicant written findings of fact and conclusions
of law in accord with Idaho Code §67-6519 stating the reasons for the decision
reached, All conditions of approval shall be attached to the written decision.
D.
Mailed notice of the Director's decision shall be sent to all parties of record. Any
person aggrieved by the Director's decision may submit a written request for City
Council review in accord with Section 11-5A-6 of this Chapter, The Director's
decision is not final until the end of the fifteen- (15) day appeal period,
11-5A-5:
PUBLIC HEARING PROCESS:
A.
Decisions on permits and requests for action requiring a public hearing are
based on standards that require substantial discretion and are matters having
broad public interest.
B.
Applicants for permits requiring a public hearing are required to conduct a pre-
application meeting with the Department.
C.
Neighborhood meetings,
1. Applicants are required to hold a neighborhood meeting to provide an
opportunity for public review of the proposed project prior to the submittal of an
application.
2. Notice of the neighborhood meeting shall be provided to all property owners of
record within three hundred feet (300') of the exterior boundary of the
application property, Notice of the meeting shall be either hand-delivered or
mailed to the recipients.
3, Notice of the meeting shall be provided at least five days (5) prior to the
meeting. The meeting shall be held not more than three (3) months or less
than five (5) days prior to the submittal of an application.
D,
Posting of public hearing notice
1. All applications requiring a public hearing shall post the subject property,
except posting is not required for a Unified Development Code text
amendment, a Comprehensive Plan text amendment and/or vacations,
5
Chapter 5 Article A. GENERAL PROVISIONS
8/29/05
2, Not less than ten (10) days prior to the hearing, the applicant shall post a copy
of the public hearing notice of the application on the property under
consideration. Except as noted herein, posting of the property must be in
substantial compliance with the following requirements:
a. Conditional Use Permit applications for daycare, group; and annexation,
preliminary plat, variance, rezone, and comprehensive plan amendment
applications for properties of land less than three (3) acres in size: The
applicant shall post a sign consisting of one eleven-inch by seventeen- inch
(11" x 17") piece of paper mounted to a rigid surface of at least equal size, or
other material stating the name of the applicant, a statement concerning the
proposed development, and the date, time and location of the public hearing.
b, All other hearings shall require the following posting notice:
Size =
six inches (6")
Size =
two inches (2")
Size =
one and one-half
inches (1.5")
2,
6
i.
The sign(s) shall consist of four-foot by four-foot (4' x 4') plywood or other
hard surface mounted on two (2) four-inch by four-inch (4" x 4") posts, or
attached to another Director-approved support in such a manner that it is
perpendicular to the roadway along which the sign is posted and the
bottom of the sign is at least three feet (3') above the ground.
ii.
Centered at the top of the four-foot by four-foot (4' x 4') signboard(s) in
six inch (6") letters shall be the words "City of Meridian Public Hearing
Notice," In addition, each sign will inform the public of the nature of the
hearing, the date, time and address of the hearing location, a summary of
the proposal to be considered, a city contact phone number, the location
of the development and the name of the applicant, and if applicable, the
proposed development. Each sign shall be painted white, and the letters
shall be painted black and shall appear on both sides, An example of this
sign is set forth below.
CITY OF MERIDIAN PUBLIC HEARING NOTICE
Meridian Planning and Zoning Commission
THE CITY OF MERIDIAN will hold a public hearing on
January 1 2001, at 7:00 p.m. at the Meridian City Hall
(33 E. Idaho).
PURPOSE: Annexation and Zoning - You Name it Subdivision-
Zoning R-4, Subdivision Preliminary Plat, 7.66 acres, 29 lots, single-
family dwelling, 1 lot open space/drainage w/landscape entryway,
PROPERTY LOCATION: SW corner of Ustick Rd, and Linder Rd.
APPLICATION BY: John and Jane Doe
, CO ]tact a Citv Planner at 884-5533 witb an~ Questions..
Ign plac ment: I ne signs snail De posted on tlie lana being considered along
ach roa< way that is adjacent to the subject property boundaries. The sign(s)
hall be I cated on the property, outside of the public right-of-way, If the sign
Chapter 5 Article A. GENERAL PROVISIONS
8/29/05
cannot be placed on the property and still be clearly visible, the sign may be
placed within the right-of-way if the applicant can obtain the consent of the
owner of the right-of-way.
3, Proof of posting: The applicant shall submit a notarized statement and a
photograph of the posting to the City no later than seven (7) days prior to the
public hearing attesting to where and when the sign(s) were posted. Unless
Certificate is received by such date, the hearing will be continued.
4, Sign removal: The signs shall be removed no later than three (3) days after the
public hearing for which the sign had been posted is ended.
E.
Mailing and publishing of the public hearing notice
1, Legal Notice: At least fifteen (15) days prior to the public hearing, the City shall
publish a notice of the time and place and a summary of the application in the
official newspaper of general circulation in Ada County,
2, Radius notice:
a. At least fifteen (15) days prior to the public hearing, the City shall send a
notice by first class mail of the time and place, and a summary of the
application to property owners or purchasers of record (as listed in the
current records of the Ada County Assessor) owning property within three
hundred feet (300') of the property being considered,
b, The noticing shall be extended to property owners within one thousand feet
(1,000') of the external property boundaries for heavy industries and wireless
communication facilities,
c, The Director may determine, or other applications provided for in this Title
may require, that notices be sent to property owners or purchasers of record
whose properties are further than three hundred feet (300') or one thousand
feet (1,000') from the external boundaries of the property,
3. Alternate forms of notice. When posted or mailed notice is required of two
hundred (200) or more property owners or purchasers of record, alternate
forms of notice may be provided as follows:
a. In lieu of mailed notice, one (1) additional notice of the time and place of the
hearing and summary of the proposal shall be published in a newspaper of
general circulation within the County, not less than ten (10) days prior to the
hearing; and/or
b, At least seven (7) days prior to the hearing, a public service announcement
shall be made available to newspapers, radio, and television stations
servicing the City.
7
Chapter 5 Article A. GENERAL PROVISIONS
8
8/29/05
4. Notice to other jurisdictions: The City shall send notice of the application to
other jurisdictions with interest and/or authority over the application, including
but not limited, to the following:
a, Other jurisdictions with joint jurisdiction;
b. Appropriate utility companies, irrigation companies or districts and drainage
districts;
c. Health and transportation authorities; and
d. School district.
F.
Public hearing
1. The City Council and/or Planning and Zoning Commission shall conduct the
public hearing in accord with the procedures set forth in Title 1 of the Meridian
City Code,
2, If the decision-making body (see Table 11-5A-1) finds that it does not have
sufficient information to make a decision, it may continue the public hearing.
The decision-making body may also choose to conduct a study session with all
parties of record to address questions and issues related to the application,
3, The decision-making body (see Table 11-5A-1) may require or recommend
conditions of approval that it deems necessary to protect the public health,
safety, and welfare and/or to prevent undue adverse impacts on surrounding
properties,
4, After the conduct of the public hearing, the Planning and Zoning Commission
may recommend approval, recommend denial, approve, approve with
conditions, or deny the application request; the City Council may approve,
approve with conditions, or deny the application request.
5. The decision-making body (see Table 11-5A-1) action shall be made within
seventy (70) days after receiving all information to make a decision or seventy
(70) days from the last meeting where the application is considered if
additional information is not needed, For applications where the Commission is
acting as a recommending body, the Commission shall forward its
recommendation to the Council within forty-five (45) days.
Chapter 5 Article A, GENERAL PROVISIONS
8/29/05
6. The decision-making body (see Table 11-5A-1) shall provide the applicant
written findings of fact and conclusions of law in accord with Idaho Code §67-
6519 and §67-6535 stating the reasons for the decision reached. Conditions of
approval shall be attached to the written decision or recommendation,
11-5A-6:
CITY COUNCIL REVIEW PROCESS:
A.
Request for City Council review of a decision of the Director or the Planning and
Zoning Commission concerning the administration of this Title may be made by
an applicant, the Director, or a party of record,
B,
All requests for review shall be filed in writing with the Department within fifteen
(15) days after the written decision is issued. The request shall include the
following information:
1, The decision being requested for review;
2. The name and address of the person requesting the review and their interest in
the matter; and
3. The specific grounds upon which the request is made.
C.
After receipt of a request for review of the action of the Director or Commission,
the Council shall hold a de nova public hearing to reach a decision to uphold or
overrule the action.
D.
By simple majority vote, the City Council may uphold or overrule the decision,
1. In the case of consideration of a decision of the Director:
a. If the action is overruled, the City Council shall issue a written decision and
send the matter back to the Director for action consistent with the City
Council's decision.
b, If the action of the Director is upheld, the City Council shall issue a written
decision stating the decision and the reasons for the decision.
2. In the case of consideration of a decision of the Commission, if the decision is
overruled, the Council shall issue findings consistent with the decision.
E.
Stay of proceedings. A request for City Council review stays all proceedings in
furtherance of the action unless the Director certifies to the Councilor
Commission, after notice of the request is filed, that by reason of facts stated in
the application, a stay would in the Director's opinion cause imminent peril to life
and property, In such cases, proceedings shall not be stayed other than by a
restraining order which may be granted by the Council or court based on an
application, with notice showing due cause,
9
Chapter 5 Article A, GENERAL PROVISIONS
10
8/29/05
F,
Notification: Within ten (10) days, after a decision has been rendered by the City
Council, the Director shall send a copy of the written decision to the individual
requesting the City Council review and the applicant, as may be applicable.
11-5A- 7: FEES: In the application of fees for the review of permit applications, the
following rules shall apply:
A.
Basis for calculation: For any requested public hearing involving more than one
(1) classification of a petition or application, the filing fee shall be calculated on
the basis of the cumulative fee for the individual application(s),
B,
Waiver of fee: Notwithstanding any of the preceding fee schedules, the City
Council shall have the authority to waive in whole or in part any application fee
when such a fee would present a hardship. An applicant for a hardship waiver
must present the request in writing to the City Council, outlining the degree of
such hardship,
C,
Fees not refundable: Fees to be charged for the various procedures stated
above are not refundable, except where a petition or application is withdrawn at
least three (3) weeks prior to the date of its scheduled public hearing, and then
only after order by the City Council.
Chapter 5 Article A. GENERAL PROVISIONS
8/29/05
CHAPTER 5
ADMINISTRATION
ARTICLE B. SPECIFIC PROVISIONS
ARTICLE B.
11-58-1 :
11-58-2:
11-58-3:
11-58-4:
11-58-5:
11-58-6:
SECTIONS:
CERTIFICATE OF ZONING COMPLIANCE
UNIFIED DEVELOPMENT CODE AMENDMENTS
ANNEXATIONS AND REZONES
VARIANCES
ALTERNATIVE COMPLIANCE
CONDITIONAL USES
11-58-1 :
CERTIFICATE OF ZONING COMPLIANCE:
A.
Purpose: The purpose of the Certificate of Zoning Compliance is to ensure that
all construction, alterations and/or the establishment of a new use complies with
all of the provisions of this Title before any work on the structure is started and/or
the use is established.
8,
Applicability: These provisions apply to all requests for permits that involve
construction, exterior alterations and/or the establishment of a new use, These
provisions do not apply to tenant improvements where the footprint of an existing
structure is not enlarged,
C.
Process: A Certificate of Zoning Compliance shall be issued by the Director
when there is a demonstration that the development complies with all provisions
of this Title,
1, No Certificate of Zoning Compliance shall be issued for any use on a property
in violation of this Title or on a property that contains structures or uses in
violation of this Title,
2. The Certificate of Zoning Compliance shall be invalid:
a, If the Certificate was secured in violation of a State or Federal law;
b, Upon violation of any regulations of this Title on the subject property; or
c. If the conditions of the Certificate of Zoning Compliance have been violated,
All further work shall cease on a project until the violation has been
remedied,
3. Certificate of Zoning Compliances issued in conjunction with a proposed use
shall expire if said use has not commenced within one (1) year of the date of
issuance of the Certificate of Zoning Compliance.
Chapter 5 Article B, SPECIFIC PROVISIONS
8/29/05
4, Certificate of Zoning Compliances issued in conjunction with construction or
alteration of a structure shall expire if said construction or alteration has not
commenced within one (1) year of the date of issuance of the Certificate of
Zoning Compliance.
5, The Certificate of Zoning Compliance may require inspections and approvals
specified in the approval of the application.
11-58-2:
UNIFIED DEVELOPMENT CODE TEXT AMENDMENTS:
A.
Purpose: The purpose of this section is to establish procedures for amendments
to the text, tables and graphics of this Title.
8,
Applicability: The provisions of this section shall apply to all text within this Title.
C,
Process:
1. Unified Development Code Amendment initiated by the City. The Planning and
Zoning Commission may propose to amend this Title following notice and
public hearing procedures in Article A. GENERAL PROVISIONS of this Chapter,
2, Unified Development Amendment initiated by a property owner, The applicant
shall complete a pre-application conference with the Director prior to submittal
of an application for a Unified Development Code text amendment. An
application and fees, in accord with Article A. GENERAL PROVISIONS of this
Chapter, shall be submitted to the Director on forms provided by the
Department.
3, The Council shall apply the standard listed in Section 11-58-20 and the
findings listed in Section 11-5B-2E of this Title to review the Unified
Development Code text amendment.
D,
Required findings, Upon recommendation from the Commission, the Council
shall make a full investigation and shall, at the public hearing, review the
application. In order to grant a text amendment to the Unified Development
Code, the Council shall make the following findings:
1, The text amendment complies with the applicable provisions of the
comprehensive plan;
2, The text amendment shall not be materially detrimental to the public health,
safety, and welfare; and
3. The text amendment shall not result in an adverse impact upon the delivery of
services by any political subdivision providing public services within the City
including, but not limited to, school districts.
2
Chapter 5 Article B. SPECIFIC PROVISIONS
8/29/05
11-58-3:
ANNEXATIONS AND REZONES:
A.
Purpose: The purpose of this section is to establish procedures for annexations
and rezones, including amendments to the Official Zoning Maps,
B.
Applicability: The provisions of this section shall apply to all lands within the
legally defined Meridian City limits, the Meridian Area of City Impact, and all
other annexable properties as set forth in Idaho Code §50-222.
C,
Process:
1. Annexation and/or rezone initiated by Council. The City Council shall follow the
procedures for annexation as set forth in Idaho Code §50-222,
2, Annexation and/or rezone initiated by property owner, The applicant shall
complete a pre-application conference with the Director prior to submittal of an
application for an Annexation and/or Rezone, An application and fees, in
accord with Article A. GENERAL PROVISIONS of this Chapter, shall be submitted
to the Director on forms provided by the Department.
3. The Council shall apply the standard listed in Section 11-58-30 and the
findings listed in Section 11-58-3E of this Title to review the annexation and/or
rezone request.
D.
Standards:
1. The subject property shall meet the minimum dimensional standards of the
proposed district.
2. The City may require a development agreement in conjunction with the
annexation or rezone pursuant to Idaho Code §65-6711A.
a. The termination of a development agreement shall result in the reversal of
the Official Zoning map amendment approval and applicable development
approval for any undeveloped portion of property subject to the development
agreement. The undeveloped property subject to the development
agreement shall be rezoned to the district classification in effect prior to
approval of the development agreement.
b, Any action by the Council to amend or terminate a previously recorded
development agreement shall be recorded in the office of the Ada County
Recorder by the Clerk to the Council.
E.
Required Findings, Upon recommendation from the Commission, the Council
shall make a full investigation and shall, at the public hearing, review the
application, In order to grant an annexation and/or rezone, the Council shall
make the following findings:
3
Chapter 5 Article B. SPECIFIC PROVISIONS
8/29/05
1. The map amendment complies with the applicable provisions of the
comprehensive plan;
2. The map amendment complies with the regulations outlined for the proposed
district, specifically the purpose statement;
3, The map amendment shall not be materially detrimental to the public health,
safety, and welfare; and
4, The map amendment shall not result in an adverse impact upon the delivery of
services by any political subdivision providing public services within the City
including, but not limited to, school districts,
5, The annexation (as applicable) is in the best of interest of City.
11-5B-4:
VARIANCES:
A.
Purpose: The purpose of this section is to establish procedures for modification
from the bulk and placement requirements of this Title.
B,
Applicability: The provisions of this section shall apply to requests to vary from
the requirements of this Title with respect to lot size, width, and depth; front,
side, and rear setbacks; parking spaces; building height; and all other provisions
of this Title affecting the size and shape of a structure or the placement upon
properties,
C.
Process,
1. The applicant shall complete a pre-application conference with the Director
prior to submittal of an application for a variance,
2. An application and fees, in accord with Article A. GENERAL PROVISIONS of this
Chapter, shall be submitted to the Director on forms provided by the Planning
Department.
3. The Council shall apply the standards listed in Section 11-5B-4.D and all the
findings listed in Section 11-5B-4,E of this Title to review the variance.
D,
Standard, The variance shall comply with Idaho Code §67-6516,
E.
Required findings. In order to grant a variance, the Council shall make the
following findings:
1. The variance shall not grant a right or special privilege that is not otherwise
allowed in the district;
2, The variance relieves an undue hardship because of characteristics of the site;
and
4
Chapter 5 Article B. SPECIFIC PROVISIONS
8/29105
3, The variance shall not be detrimental to the public health, safety, and welfare.
11-58-5:
ALTERNATIVE COMPLIANCE:
A.
Purpose: The purpose of this process is to provide for alternative means in which
to meet the intended purposes of certain development regulations when explicit
compliance is not feasible or the alternative means is superior to what is
required. The regulations of this section are intended to encourage creative
solutions to land use problems, The City recognizes that some specific
requirements of this Title do not anticipate all possible situations, Further, the
City recognizes that there may be land use proposals that conform to the
purpose, intent, and objectives of the regulations in this Title but were not
anticipated in the specific regulations, This subsection sets forth an alternative
method of compliance in the event of these situations,
8.
Applicability:
1, This process is intended to replace specific requirements as set forth
throughout this Title as follows:
TABLE 11-5A-1: ALTERNATIVE COMPLIANCE
11-6C-3
11.6C-3
11-3A-7
11.28-3
11-2C-3
11-4-3.44
11-38
11.30-5
11-3A-7
11.3C.5
11-3C-6
11.3F-4
11-38-5
11-3A-21
2. Requests for alternative compliance are allowed only when one (1) or more of
the following conditions exists:
a. Topography, soil, vegetation, or other site conditions are such that full
compliance is impossible or impractical;
b, The site involves space limitations or an unusually shaped lot;
c, Safety considerations make alternative compliance desirable;
5
Chapter 5 Article B. SPECIFIC PROVISIONS
6
8/29/05
d. Other regulatory agencies or departments having jurisdiction are requiring
design standards that conflict with the requirements of this Article;
e, The proposed design includes innovative design features based on "New
Urbanism," "Neo-Traditional Design," or other site designs that promote
walkable and mixed use neighborhoods; or
f, Additional environmental quality improvements would result from the
alternative compliance,
3. Requests for alternative compliance of the landscaping requirements may also
be based on the following conditions:
a, Because of a change of use on an existing site, the required landscape
buffer is larger than can be provided; or
b, The applicant is proposing a pond with a permanent water level in a required
landscape area.
C,
Process:
1. The applicant shall submit a written application for alternative compliance prior
to the submittal of a development application or upon the determination that
the development request does not comply with specific provisions of this Title,
2, An application and fees, in accord with Article A. GENERAL PROVISIONS of this
Chapter, shall be submitted to the Director on forms provided by the
Development Services Department.
3, The application shall specify:
a. the specific requirements that are proposed to be modified;
b. the reasons for the modification; and
c. a demonstration of how the alternative means for compliance meets the
requirements' intended purpose,
4. The Director shall apply the standard listed in Section 11-5B-4,D and the
findings listed in Section 11-3B-4.E of this Title to review the request for
alternative compliance.
0,
Standard: The proposed alternative means for compliance with the specific
requirements shall demonstrate that the alternative provides an equal or superior
means of meeting the intent and purpose of the regulation,
E.
Required findings: In order to grant approval for an alternative compliance, the
Director shall determine the following:
Chapter 5 Article 8, SPECIFIC PROVISIONS
7
8/29/05
1. Strict adherence or application of the requirements are not feasible; or
2, The alternative compliance provides an equal or superior means for meeting
the requirements; and
3, The alternative means will not be materially detrimental to the public welfare or
impair the intended uses and character of surrounding properties,
F.
Precedent: Alternative compliance shall be limited to the specific project under
consideration and shall not establish precedent for acceptance in other cases,
11-58-6:
CONDITIONAL USES:
A.
Purpose: The purpose of this section is to establish procedures that allow for a
particular use on a particular property subject to specific terms and conditions of
approval.
8,
Applicability: The provisions of this section apply to all uses identified as
conditional use in Chapter 2 district regulations and as otherwise required by
specific development standards in Chapter 4 specific use standards.
C.
Process:
1, The applicant shall complete a pre-application conference with the Director
prior to submittal of an application for a conditional use.
2, An application and fees, in accord with Article A. GENERAL PROVISIONS of this
Chapter, shall be submitted to the Director on forms provided by the Planning
Department.
3. The Director may require additional information concerning the social,
economic, fiscal or environmental effects of the proposed conditional use.
D,
Standards: In approving any conditional use, the decision-making body may
prescribe appropriate conditions, bonds and safeguards in conformity with this
Title that:
1. Minimize adverse impact of the use on other property,
2, Control the sequence and timing of the use,
3, Control the duration of the use,
4. Assure that the use and the property in which the use is located is maintained
properly,
5, Designate the exact location and nature of the use and the property
development.
Chapter 5 Article B. SPECIFIC PROVISIONS
8
8/29/05
6, Require the provision for on-site or off-site public facilities or services.
7, Require more restrictive standards than those generally required in this Title,
8. Require mitigation of adverse impacts of the proposed development upon
service delivery by any political subdivision, including school districts, that
provides services within the City,
E.
Findings: The Commission shall base its determination on the Conditional Use
Permit request upon the following:
1, That the site is large enough to accommodate the proposed use and meet all
the dimensional and development regulations in the district in which the use is
located,
2, That the proposed use will be harmonious with the Meridian Comprehensive
Plan and in accord with the requirements of this Title,
3, That the design, construction, operation and maintenance will be compatible
with other uses in the general neighborhood and with the existing or intended
character of the general vicinity and that such use will not adversely change
the essential character of the same area.
4, That the proposed use, if it complies with all conditions of the approval
imposed, will not adversely affect other property in the vicinity.
5, That the proposed use will be served adequately by essential public facilities
and services such as highways, streets, schools, parks, police and fire
protection, drainage structures, refuse disposal, water, and sewer.
6. That the proposed use will not create excessive additional costs for public
facilities and services and will not be detrimental to the economic welfare of the
community.
7. That the proposed use will not involve activities or processes, materials,
equipment and conditions of operation that will be detrimental to any persons,
property or the general welfare by reason of excessive production of traffic,
noise, smoke, fumes, glare or odors,
8, That the proposed use will not result in the destruction, loss or damage of a
natural, scenic or historic feature considered to be of major importance,
F,
Time limitations and extensions:
1, A Conditional Use Permit, when granted, shall be valid for a maximum period
of eighteen (18) months unless otherwise approved by the City, During this
time, the applicant shall commence the use as permitted in accord with the
conditions of approval, satisfy the requirements set forth in the conditions of
Chapter 5 Article ß, SPECIFIC PROVISIONS
8/29/05
approval, and acquire building permits and commence construction of
permanent footings or structures on or in the ground,
2, For Conditional Use Permit that also require platting, the final plat must be
recorded within this eighteen- (18) month period.
3, For projects with multiple phases, the eighteen (18) month deadline shall apply
to the first phase, In the event that the development is made in successive
contiguous segments or multiple phases, such phases shall be constructed
within successive intervals of one (1) year from the original date of approval. If
the successive phases are not submitted within the one- (I) year interval, the
conditional approval of the future phases shall be null and void.
4, Upon written request and filed by the applicant prior to the termination of the
period in accord with 11-5B-6.G,1 of this section, the Director may authorize a
single extension of time to commence the use not to exceed one eighteen (18)
month period, Additional time extensions up to eighteen (18) months as
determined and approved by the Commission may be granted. With all
extensions, the Director or Commission may require the conditional use
comply with the current provisions of this Chapter,
5, Approval of requests for time extension to an approved conditional use shall be
determined by the decision-making body at a public hearing and will not be
granted if any of the following conditions exist:
a, Significant amendments to the Comprehensive Plan or Unified Development
Code have been adopted that change the basis under which the Conditional
Use Permit was granted,
b, Significant changes in land use have occurred in the area that will impact or
be impacted by the project.
c. Hazardous conditions have developed or have been discovered that will
impact the project.
d, Community facilities and services are no longer adequate to serve the
project.
6. The Commission may place additional requirements, modify the previous
approval or deny the request.
7, No more than two (2) one- (1) year time extensions may be granted to a single
conditional use.
G.
Transfers and Modifications:
1, With the exceptions of child care services, Conditional Use Permit are an
entitlement to the specific property on which the approval was granted and
9
Chapter 5 Article 8, SPECIFIC PROVISIONS
8/29/05
upon property sale the entitlement transfers to the new owner(s) without further
application or approval, provided, however, the new owner(s) shall be bound
by the same time limits and conditions of approval as the original permit
holder(s). A Conditional Use Permit is not transferable from one property to
another.
2, The Director may approve or deny specified minor modifications, provided
such modifications were not the subject of review during the original public
hearing and will not adversely impact adjacent properties, Such minor
modifications include, but are not limited to, the following:
a. A reduction in density not exceeding twenty-five percent (25%) of the total
units.
b. Minor relocation of dwelling units or building pads for practical reasons such
as road alignment, topography or access.
c. Minor changes to the recreation area or open space design, but not
elimination or reduction in area,
d, Increase in building square footage, not exceeding twenty percent (20%),
provided that the parking and landscaping requirements are met.
3, All other modifications shall be considered by the Planning and Zoning
Commission at a public hearing, The Commission may modify the conditions,
limitations and/or scope of the permit, in accord with the limitations and
requirements of Section 11-58-68 of this Article,
4, A change in ownership for a day care facility or group day care facility for
children shall require a modification to the original approval.
H,
Revocation:
1. A Conditional Use Permit may be revoked or modified the City Council, upon
notice and hearing, for breach or violation of any condition of approval or
limitation of the permit.
2, If City Council decides to revoke a Conditional Use Permit, either on its own
action or upon complaint to the City Council, the Council shall notify the permit
holder of its intention to revoke the conditional use permit and provide the
permit holder with the opportunity to contest the revocation,
3, Fifteen (15) days' prior notice of the hearing shall be given to the permit holder
and all property owners within three hundred feet (300') of the boundaries of
the land that was issued the permit.
4, The City Council shall make findings of fact and conclusions of law supporting
its decision to revoke the Conditional Use Permit. If the Council does not
10
Chapter 5 Article ß, SPECIFIC PROVISIONS
8/29/05
decide to revoke the Conditional Use Permit, no findings of fact and
conclusions of law shall be made.
5, An aggrieved permit holder or complainant may appeal the decision of the City
Council under the Administrative Procedures Act of the State of Idaho, Idaho
Code §67-5215(b) through (g).
11-58-7: COMPREHENSIVE PLAN AMENDMENTS:
A.
Purpose: The purpose of this section is to establish procedures for amendments
to the text and map components of the adopted Comprehensive Plan of the City
of Meridian.
B.
Applicability: The provisions of this section shall apply to any Comprehensive
Plan Amendment application.
C.
Process:
1. Comprehensive Plan Amendment initiated by the City. The Planning and
Zoning Commission may propose to amend the Comprehensive Plan following
notice and public hearing procedures in Article A. GENERAL PROVISIONS of this
Chapter and the hearing procedures in Section 67-6509 of the Idaho Code,
2. Comprehensive Plan Amendment initiated by a property owner, The applicant
shall complete a pre-application conference with the Director prior to submittal
of an application for a Comprehensive Plan Amendment. An application and
fees, in accord with Article A. GENERAL PROVISIONS of this Chapter, shall be
submitted to the Director on forms provided by the Department.
3, The application deadlines for amendments to the Land Use Map component of
the Comprehensive Plan shall be June 15 and December 15 of every year,
Amendments to the text component of the Plan may be submitted at any time.
The Commission may recommend amendments to the Land Use Map
component of the Comprehensive Plan not more frequently than every six (6)
months, Amendments to the text of the Comprehensive Plan may be
recommended by the Commission at any time.
4. The Commission, prior to recommending the adoption, amendment, or repeal
of the Comprehensive Plan to the Council, shall conduct at least one public
hearing in accordance with Article A. GENERAL PROVISIONS of this Chapter and
in accordance with the procedures in Section 67-6509 of the Idaho Code,
D.
Required Findings: Upon recommendation from the Commission, the Council
shall make a full investigation and shall, at the public hearing, review the
application, In order to grant an amendment to the Comprehensive Plan, the
Council shall make the following findings:
1. The proposed amendment is consistent with the other elements of the
Comprehensive Plan,
11
Chapter 5 Article 8, SPECIFIC PROVISIONS
12
8/29/05
2. The proposed amendment provides an improved guide to future growth and
development of the city,
3, The proposed amendment is internally consistent with the Goals, Objectives
and Policies of the Comprehensive Plan and the Comprehensive Plan Land
Use Map.
4, The proposed amendment is consistent with the Unified Development Code,
5, The proposed amendment is in the best interest of the City of Meridian.
Chapter 5 Article B, SPECIFIC PROVISIONS
1
8/29/05
CHAPTER 5
ADMINISTRATION
ARTICLE C. SURETY AGREEMENTS
ARTICLE C.
11-5C-1:
11-5C-2:
11-5C-3:
11-5C-4:
SECTIONS:
PURPOSE
APPLICABILITY
PROCESS
PENALTY FOR FAILURE TO COMPLETE CONSTRUCTION
11-5C-1: PURPOSE: The purpose of this section is to establish procedures that
guarantee the completion of improvements where occupancy of a structure is desired,
but the improvements required by the City have not been completed,
11-5C-2: APPLICABILITY: The provisions of this section shall apply only to those
improvements that are not needed to protect the public heath, safety and life. Applicable
improvements include landscaping, fencing, pressurized irrigation systems and site
amenities, The following improvements must be installed and are not eligible for surety:
water, sewer, and power facilities; parking lot paving and striping; and street paving.
11-5C-3:
PROCESS:
A.
The City may withhold building, electrical or plumbing permits, certificates of
zoning compliance, or certificates of occupancy on the lots or land being
developed or subdivided, or the structures constructed thereon, if the
improvements required under this Title have not been constructed or installed, or
if such improvements are not functioning properly.
B.
All improvements related to public life, safety and health shall be completed prior
to occupancy of the structures,
C,
In the event that an applicant and/or owner cannot complete the non- life, safety
and health improvements, such as landscaping, pressurized irrigation, and
fencing, within the time specified in the final plat approval or prior to occupancy,
a surety agreement may be approved in accord with the procedures set forth in
Chapter 5 administration.
D.
The amount of surety called for shall be equal to not less than 110 percent of the
cost of completing the required improvements. The estimated cost shall be
provided by the applicant and reviewed and approved by the City Engineer,
excluding landscape and fencing sureties, The estimated cost for landscape and
fencing sureties shall be provided by the applicant and reviewed and approved
by the Director.
Chapter 5 Article C. SURETY AGREEMENTS
8/29/05
E.
The surety shall be in the form of an irrevocable letter of credit or a cash deposit.
In all cases the surety shall be drawn solely in favor of, and payable to, the order
of the City of Meridian, in accord with the regulations contained in the surety
agreement by and between the guarantor and the City of Meridian,
F,
Where a surety is accepted by the City and deposited as provided by this Article,
the City may release temporary occupancy of a structure or structures. The term
of the temporary occupancy shall be determined by the City Engineer and/or
Director, The term shall not exceed one hundred eighty days (180) in length.
G.
Where a surety is accepted by the City and deposited as provided by this Article,
the surety shall be released subject to the following regulations:
1. The owner shall submit a written request to the City to return the surety, The
request shall include the following documents:
a, A statement from the owner that the required improvements are complete,
b, Two sets of prints of the as-built plans and specifications for all
improvements,
2, The City Engineer and/or Director shall verify and certify that the required
improvements, as detailed in the surety agreement, have been installed. The
as-built plans shall be reviewed and approved by the City Engineer or Director.
3. Upon certification of the City Engineer and/or the Director, the City shall
release the sureties heretofore deposited in the manner and to the extent as
provided for in the surety agreement in accord with the regulations of this
Article,
11- 5C-4: PENALTY FOR FAILURE TO COMPLETE CONSTRUCTION: In the
event an applicant and/or owner shall, in any case, fail to complete the public
improvements in the time period required, the City Council may proceed to have such
work completed and recover the city's costs by any legal means available, including:
foreclosing its lien or, in the event financial guarantees have been required, to pursue
the remedies provided by those financial guarantees.
2
Chapter 5 Article C, SURETY AGREEMENTS
8/29/05
CHAPTER 6
SUBDIVISION REGULATIONS
SECTIONS:
11-6-1: PURPOSE
11-6-2: APPLICABILITY
11-6-1: PURPOSE: The purpose of this Chapter shall be to implement a general
rule and standards for the subdivision of the land in the Meridian City limits and the Area
of City Impact.
11-6-2:
APPLICABILITY:
A.
All subdivision applications shall be administered in accord with Article A. general
provisions of this Chapter.
B,
All subdivision applications shall be processed in accord with Article B.
subdivision process of this Chapter,
C,
All subdivisions shall meet the design standards as set forth in Article C,
subdivision design standards of this Chapter,
1
Chapter 6 SUBDIVISION REGULATIONS
E.
F.
G,
1
8/29/05
CHAPTER 6
SUBDIVISION REGULATIONS
ARTICLE A. GENERAL PROVISIONS
ARTICLE A. SECTIONS:
11-6A-1: PURPOSE
11-6A-2: APPLICABILITY
11-6A-3: AUTHORITY
11-6A-1: PURPOSE: The purpose of this Chapter shall be to implement a general
rule for the subdivision of the land in the Meridian City limits and the Area of City Impact.
This Chapter shall be based on the officially adopted Comprehensive Plan of the City
and is enacted in order to promote and protect the public health, safety, comfort,
convenience, prosperity, and general welfare and to achieve the following objectives:
A.
To promote the achievement of the proposals of the Meridian Comprehensive
Plan;
B.
To advance the City as a self-sufficient employment and economic center;
C.
To encourage excellence and creativity in the design of all future developments
and to preserve the natural beauty of Meridian.
D,
To encourage orderly growth and development, to avoid scattered development
of land that results in:
1. Lack of water supply, sewer service, drainage, transportation facilities, or
otherwise essential public services; or
2. Excessive expenditure of public funds for the supply of such services;
To provide for desirable and appropriately located living areas and a variety of
dwelling types and densities with adequate provision for sunlight, fresh air, and
usable open space;
To provide for the manner and form of making and filing of plats;
To specify the requirements as to the extent and the manner in which:
1, Roads and streets shall be created and improved;
2. Water and sewer and other utility mains, piping connections, or other facilities
shall be installed;
3, Pedestrian pathways consistent with the Comprehensive Plan are to be located
and designed; and
Chapter 6 Article A. GENERAL PROVISIONS
8/29/05
4, Opportunities for future transit routes and stations are created;
H.
To protect existing surface waters (Five Mile, Nine Mile, and Ten Mile Creeks)
throughout the City; and
I.
To specify the administration of the regulations of this Chapter by defining the
powers and duties of approval authorities.
11-6A-2: APPLICABILITY: These regulations shall apply to the subdivision of all
land within the legally defined Meridian City limits and the Area of City Impact.
11-6A-3: AUTHORITY: The Ordinance codified in this Chapter 6 SUBDIVISION
REGULATIONS is adopted pursuant to authority granted by Idaho Code §67-6501 et seq.
and Idaho Code §50-1301 et seq, and the Idaho Constitution article 12, section 2, as
amended or subsequently codified, No subdivision plat required by this Chapter or the
Idaho Code shall be admitted to the public land records of the County, or recorded by
the County Recorder, until such subdivision plat has received final approval by the City
Council and signature of the City Engineer,
2
Chapter 6 Article A, GENERAL PROVISIONS
B,
C.
1
8/29/05
CHAPTER 6
SUBDIVISION REGULATIONS
ARTICLE B. SUBDIVISION PROCESS
ARTICLE B.
11-6B-1:
11-6B-2:
11-6B-3:
11-6B-4:
11-6B-5:
11-6B-6:
11-6B-7:
11-6B-8:
SECTIONS:
APPLICABILITY
PRELIMINARY PLAT PROCESS
FINAL PLAT PROCESS
COMBINED PRELIMINARY AND FINAL PLAT PROCESS
SHORT PLAT PROCESS
REQUIRED FINDINGS
TERM OF PERMITS
PROPERTY BOUNDARY ADJUSTMENT
11-68-1: APPLICABILITY: There are four processes that govern the
subdivision of land: preliminary plat, final plat, short plat, and combined preliminary and
final plat. The process to be followed will depend on the property, the number of lots
created and the type of land use proposed and/or allowed on the property. The four
processes apply to all requests for the subdivision of property with the following
exceptions:
A.
A parcel created by court decree that meets the dimensional standards of the
district in effect at the date of decree shall be deemed eligible for development.
Any parcel created by court decree that does not meet the dimensional
standards of the applicable districts in effect at the date of the court decree shall
be recognized as a parcel for transfer of ownership; however, the parcel shall not
be eligible for development including any building permits for renovation or repair
of an existing structure.
8,
Property boundary adjustments: Adjustment of property lines in accord with
Section 11-6B-8 of this Chapter,
11-6B-2:
PRELIMINARY PLAT PROCESS:
A.
Pre-application conference: The applicant shall complete a pre-application
conference with the Director or designee prior to submittal of an application for a
preliminary plat. The purpose of this meeting is to discuss early and informally
the purpose and effect of this Title and the criteria and standards contained
herein,
Neighborhood meeting: In accord with Chapter 5 administration of this Title,
applicants are required to hold a neighborhood meeting to provide an opportunity
for public review of the proposed project prior to the submittal of an application,
Application requirements: An application, map requirements, and fees, in accord
with Chapter 5 administration of this Title shall be submitted to the Director, At
the discretion of the Director or City Engineer, appropriate supplementary
Chapter 6 Article B. SUBDIVISION PROCESS
8/29/05
information may also be required to sufficiently detail the proposed development
within any special development area, including but not limited to hillside, planned
unit development, floodplain, cemetery, manufactured home parks, and/or
hazardous or unique areas of development.
D.
Public hearing Requirements: All preliminary plat applications shall comply with
the public notice and hearing procedures in accord with Chapter 5 administration
of this Title,
E.
Decision: In accord with Chapter 5 administration of this Title, a decision on a
preliminary plat for a parcel of land is made by the City Council based on the
recommendations of the Planning and Zoning Commission,
11-6B-3:
FINAL PLAT PROCESS:
A.
Application requirements: After the approval or conditional approval of the
preliminary plat, the applicant may cause the total parcel, or any part thereof, to
be surveyed and a final plat prepared in accord with the approved preliminary
plat. An application and fees, in accord with Chapter 5 administration of this Title
shall be submitted to the Director on forms provided by the Planning
Department.
B.
Contents of final plat: The final plat shall include and be in compliance with all
items required under Idaho Code §50-1301 et seq. The final plat submittal shall
include at least:
1, A written application for approval of such final plat as stipulated by the
Commission;
2. Proof of current ownership of the real property included in the proposed final
plat and consent of recorded owners of the plat;
3, Such other information as the Director or City Engineer may deem necessary
to establish whether or not all proper parties have signed and/or approved said
final plat;
4. A statement of conformance with the approved preliminary plat and meeting all
requirements or conditions thereof;
5, A statement of conformance with all requirements and provisions of this Title;
and
6, A statement of conformance with acceptable engineering, architectural and
surveying practices and local standards,
C,
Director review:
2
Chapter 6 Article B. SUBDIVISION PROCESS
8/29/05
1. Acceptance: Upon receipt of the final plat, and compliance with all other
requirements as provided for herein, the Director shall certify the application as
complete and shall affix the date of acceptance.
2. Substantial compliance:
a, The Director or designee shall review the final plat for substantial compliance
with the approved or conditionally approved preliminary plat. The final plat
shall be determined in substantial compliance with the preliminary plat,
notwithstanding the following changes:
i. The number of buildable lots is the same or fewer;
ii. The amount of common open space is increased;
iii. The amount of open space is relocated with no reduction in the total
amount;
iv. The number of open space lots has been increased; or
v, The Transportation Authority has required minor changes.
b, If the number of buildable lots has increased or there has been an overall
reduction in the amount of open space, the final plat shall be determined
not to be in substantial compliance with the preliminary plat. If the
Director determines that there is substantial difference in the final plat
than that which was approved as a preliminary plat or conditions that
have not been met, the Director may require that a new preliminary plat
be submitted to the Commission,
D.
Decision on the final plat is made by the City Council in accord with Chapter
administration of this Title, Each final plat approval shall indicate the timing of the
construction and completion for all improvements and any required amenities
associated with the plat.
E.
Recording of the final plat: Upon approval or approval with conditions by the
Council and signature of the City Engineer, the applicant may submit the final
plat to the Ada County Recorder for recording. The final plat shall contain the
certifications required under Idaho Code §50-1301 et seq, as well as those
required by the City of Meridian,
11-68-4:
COMBINED PRELIMINARY AND FINAL PLAT PROCESS:
A.
Applicability: A subdivision application may be processed as both a preliminary
and final plat if all of the following exist:
1. The proposed subdivision does not exceed four (4) lots (excluding landscaping
lots); or a previous plat was approved on the subject property; and
3
Chapter 6 Article B, SUBDIVISION PROCESS
8/29/05
2. No new street dedication, excluding widening of an existing street, is required;
and
3. No major special development considerations are involved, such as
development in a floodplain or hillside development.
8,
Neighborhood meeting: In accord with Chapter 5 administration of this Title,
applicants are required to hold a neighborhood meeting to provide an opportunity
for public review of the proposed project prior to the submittal of an application.
C,
Application requirements: An application, and fees, in accord with Section 11-68-
3.A of this Chapter shall be submitted,
D,
Contents of final plat: The final plat shall include all items required in accord with
Section 11-68-3.8 of this Chapter,
E.
Decision: In accord with Chapter 5 administration of this Title, a decision on a
combined preliminary and final plat for a parcel of land is made by the City
Council based on the recommendations of the Planning and Zoning
Commission. A decision on a combined preliminary and final plat for platted land
is made by the City Council.
11-68-5:
SHORT PLAT PROCESS:
A.
Applicability:
1. A subdivision application for property within an industrial, commercial, TN-C or
0- T district may be processed as a short plat. if all of the following exists:
a. The property is an original parcel of record or a lot in a recorded subdivision.
b. The property is not the result of a previous short plat of a parcel and/or the
property is not the result of an approved parcel division by Ada County
Development Services,
c, The proposed subdivision does not exceed four (4) lots (excluding
landscaping lots) on previously platted property or does not exceed two (2)
lots (excluding landscaping lots) on a parcel of land, or is the creation of
condominium plat; and
d, No new street dedication, excluding widening of an existing street, is
involved;
e. There are no impacts on the health, safety or general welfare of the City, and
the subdivision is in the best interest of the City,
2, A condominium plat application for property in any district may be processed
as a short plat where no new development is proposed,
4
Chapter 6 Article B, SUBDIVISION PROCESS
E.
F,
11-68-7:
A.
5
8/29/05
8,
Pre-application conference: The applicant shall complete a pre-application
conference with the Director or designee prior to submittal of an application for a
preliminary plat. The purpose of this meeting is to discuss early and informally
the purpose and effect of this Title and the criteria and standards contained
herein,
C.
Application requirements: An application, map requirements, and fees, in accord
with Section 11-68-3.A of this Chapter shall be submitted.
D.
Decision: In accord with Chapter 5 administration of this Title, a decision on a
short plat is made by the Director with recommendation from the City Engineer.
11-68-6: REQUIRED FINDINGS: In consideration of a preliminary plat, combined
preliminary and final plat, or short plat, the decision-making body shall make the
following findings:
A.
The plat is in conformance with the Comprehensive Plan;
8,
Public services are available or can be made available and are adequate to
accommodate the proposed development;
C.
The plat is in conformance with scheduled public improvements in accord with
the City's capital improvement program;
D,
There is public financial capability of supporting services for the proposed
development;
The development will not be detrimental the public heath, safety or general
welfare; and
The development preserves significant natural, scenic or historic features.
TERM OF PERMITS:
Failure To submit final plat: Approval of a preliminary plat, combined preliminary
and final plat, or short plat shall become null and void if the applicant fails to
record a final plat within two (2) years of the approval of the preliminary plat or
one (1) year of the combined preliminary and final plat or short plat.
Chapter 6 Article B, SUBDIVISION PROCESS
6
8/29/05
B.
Phased development: In the event that the development of the preliminary plat is
made in successive phases in an orderly and reasonable manner, and conforms
substantially to the approved preliminary plat, such segments, if submitted within
successive intervals of eighteen (18) months, may be considered for final
approval without resubmission for preliminary plat approval
C,
Authorize extension: Upon written request and filed by the applicant prior to the
termination of the period in accord with11-6B-7,A. of this section, the Director
may authorize a single extension of time to record the final plat not to exceed
eighteen (18) months, Additional time extensions up to eighteen (18) months as
determined and approved by the City Council may be granted, With all
extensions, the Director or City Council may require the preliminary plat,
combined preliminary and final plat or short plat to comply with the current
provisions of this Title,
0,
Failure to meet timetable: If the above timetable is not met and the applicant
does not receive a time extension, the property shall be required to go through
the platting procedure again,
11-68-8:
PROPERTY BOUNDARY ADJUSTMENT:
A.
Purpose: The purpose of these regulations is to allow for the adjustment of
property lines between existing properties, and to allow for the reduction in the
number of buildable lots, A property boundary adjustment does not vacate the
platted lot lines or easements of a recorded subdivision,
B,
Applicability: These provisions apply to all existing properties,
C.
Process:
1, Application, An application and fees, in accord with Chapter 5 ADMINISTRATION
OF this Title, shall be submitted to the Director on forms provided by the
Planning Department.
2, Upon tentative approval of the application by the Director subject to any
applicable conditions of approval and the regulations of Chapter 5
ADMINISTRATION of this Title, the applicant or owner shall have one (1) year to
complete the following tasks:
a. Cause the property to be surveyed and a record of survey recorded;
b. Execute and record the necessary deeds to accomplish the property
boundary adjustments as approved;
c. Obtain new tax parcel numbers from the Ada County Assessor; and
d, Provide copies of the recorded record of survey, recorded deeds, and the
new tax parcel numbers to the Director,
Chapter 6 Article B. SUBDIVISION PROCESS
7
8/29/05
3, Upon determination by the Director that the final property boundary adjustment
is in conformance with this Article, a certificate of zoning compliance shall be
issued.
D.
Standards:
1, A property boundary adjustment shall not reduce the property size below the
minimum dimensional standards prescribed by this Title; or if one or more of
the properties is nonconforming as to the minimum dimensional standards
prescribed by this Title, the property boundary adjustment shall not increase
the nonconformity,
2. A property boundary adjustment shall not increase the original number of
properties, and may decrease the original number of properties.
3, A property boundary adjustment shall not change or move any public streets or
publicly dedicated areas in any manner.
4, Any private or public easement shall be vacated in accord with the
requirements of this Title.
Chapter 6 Article B, SUBDIVISION PROCESS
A.
8/29/05
CHAPTER 6
SUBDIVISION REGULATIONS
ARTICLE C. SUBDIVISION DESIGN AND IMPROVEMENT STANDARDS
ARTICLE C. SECTIONS:
11-6C-1: PURPOSE
11-6C-2: APPLICABILl1Y
11-6C-3 STANDARDS
11-6C-1: PURPOSE: The purpose of this Article is to establish minimum design
and improvement standards in the subdivision of land to promote the public health,
safety, and general welfare of present and future residents, and to provide for
coordinated, efficient, and attractive development consistent with the provisions of the
Meridian Comprehensive Plan,
11-6C-2:
APPLICABILITY:
A.
All plats submitted in accord with the provisions of this Chapter, and all
subdivisions, improvements and facilities done, constructed or made in accord
with said provisions shall comply with the minimum design standards set forth in
this Article provided, however, that any higher standards adopted by any
Transportation or Health Authority shall otherwise prevail.
B,
It shall be the responsibility and liability of every applicant, and the owner of the
land being subdivided, to construct and install every improvement shown on the
plat of the subdivision, represented to be included in the subdivision at any
presentation before the Commission or the City Council, and all improvements
required by the ordinances of the City specifically including the requirements of
this Article, and this responsibility and liability shall be personal to the developer
and the owner and shall also run with the land, and this responsibility and liability
shall be shown on the plat of the subdivision,
11-6C-3:
STANDARDS
The plat shall comply with all applicable requirements as set forth in Chapter 3
regulations applying to all districts.
B,
Streets:
1, Dedication: Within a proposed subdivision, arterial and collector streets as
shown on the comprehensive plan shall be dedicated to the public in all cases;
in general, all other streets shall also be dedicated to public use.
Chapter 6 Article c, SUBDIVISION DESIGN AND IMPROVEMENT STANDARDS
8/29/05
2, Street Specifications: The design, location, and widths of all street and street
intersections shall comply with the requirements of the Transportation
Authority, unless alternative standards are adopted by the City of Meridian.
3. Street Names: The naming of streets shall conform to the requirements of the
Ada County Street Name Committee, with the following exceptions:
a, The street name shall generally comply with Meridian City Code Section 8-2-
5 DESIGNATION OF STREET NAMES,
b, Street names shall not duplicate any existing street name within the county,
except where a new street is a continuation of an existing street.
c, Street names that may be spelled differently but sound the same as existing
streets shall not be used,
d, All new streets shall be named as follows: Streets having predominantly
north-south direction shall be named "Avenue" or "Road"; streets having a
predominantly east-west direction shall be named "Street" or "Way";
meandering streets shall be named "Drive," "Lane," "Terrace," "Path," or
"Trail;" and cul-de-sacs shall be named "Circle," "Court," and "Place".
e. For streets that provide primary access to a subdivision or neighborhood and
that align with an existing or planned street across an intersection that is not
part of the same subdivision or neighborhood, the street name shall not
duplicate the name of the subdivision or neighborhood.
f. Proposed streets which are a continuation of an existing street shall be given
the same name as the existing street.
g. Street name signs shall be installed in the appropriate locations at each
street intersection.
h, The Meridian City Council may approve exceptions to the requirements for
street names in accord with subsections a to g above.
4. Cul-de-sacs: No street that ends in a cul-de-sac or a dead end shall be longer
than four hundred fifty-feet (450').
5, Alleys: Alleys in the TN-R District shall be as set forth in Table 11-2D-1, All
other alleys shall have a twenty-foot (20') right of way and shall be paved.
C,
Driveways: All driveway openings in curbs shall comply with the requirements of
the Transportation Authority.
2
Chapter 6 Article C, SUBDIVISION DESIGN AND IMPROVEMENT STANDARDS
8/29/05
D,
Common driveways:
1. Maximum dwelling units served: Common driveways shall serve a maximum of
four (4) dwelling units.
2. Width standards: Common driveways shall be a minimum of twenty feet (20')
in width.
3. Maximum length: Common driveways shall be a maximum of one hundred fifty-
feet (150') in length or less, unless otherwise approved by the Meridian City
Fire Department.
4, Improvement standards: Common driveways shall be paved with a surface with
the capability of supporting fire vehicles and equipment.
5. Abutting properties: Unless limited by significant geographical features, all
properties that abut a common driveway shall take access from the driveway,
6. Turning radius: Common driveways shall be straight or provide a twenty-eight
foot (28') inside and forty-eight foot (48') outside turning radius.
7. Depictions: For any plats using a common driveway, the setbacks, building
envelope, and orientation of the lots and structures shall be shown on the
preliminary and/or final plat.
8, Easement: A perpetual ingress/egress easement shall be filed with the Ada
County Recorder, which shall include a requirement for maintenance of a
paved surface capable of supporting fire vehicles and equipment.
9. Alternative compliance: The Director may approve or recommend approval of
alternative design or construction standards when the applicant can
demonstrate that the proposed overall design meets or exceeds the intent of
the required standards of this Section and shall not be detrimental to the public
health, safety, and welfare.
E.
Easements:
1. Utility easements shall be provided along front lot lines, rear lot lines and side
lot lines when deemed necessary by the City Engineer or designee.
2, Total easement width shall not be less than ten feet (10').
3
Chapter 6 Article c, SUBDIVISION DESIGN AND IMPROVEMENT STANDARDS
4
8/29/05
F.
Blocks:
1. In the residential districts, no block face shall be more than seven hundred fifty
feet (750') in length without an intersecting, street or alley, or no block shall
have a length greater than thirteen hundred feet (1,300') without a pedestrian
connection.
2, In the TN-C and TN- R Districts, no block shall be more than five hundred feet
(500') in length without an intersecting street or alley, or no block shall have a
length greater than seven hundred feet (700') without a pedestrian connection.
Based on site design constraints or considerations, this requirement may be
amended by the Director through the Alternative Compliance procedures set
forth in Chapter 5 ADMINISTRATION of this Title.
G,
Reserve strips: Privately held reserve strips controlling access from adjacent
lands to public streets shall be prohibited.
H.
Street buffers on local streets. Street buffers on local streets may be installed at
the time of the lot development; installation of such improvements shall not be
required at the time of plat approval.
Chapter 6 Article C. SUBDIVISION DESIGN AND IMPROVEMENT STANDARDS
A.
B.
1
SECTIONS:
11-7-1 :
11-7-2:
11-7-3:
11-7-4:
11-7-5:
11- 7-6
11-7-7
11-7-1:
A.
8/29/05
CHAPTER 7
PLANNED UNIT DEVELOPMENTS
PURPOSE
APPLICABILITY
PROCESS
STANDARDS
REQUIRED FINDINGS
TIME LIMITS
MODIFICATIONS
PURPOSE:
The purpose of the Planned Unit Development (PUD) requirements is to
provide an opportunity for exemplary site development that meets the
following objectives:
1. Preserves natural, scenic and historic features of major importance;
2, Allows for innovative design that creates visually pleasing and cohesive
patterns of development; and
3. Creates functionally integrated development that allows for a more
efficient and cost-effective provision of public services.
B.
It is not the intent that the PUD process be used solely for the purposes of
deviation from the dimensional standards in the district.
11-7-2:
any district.
11-7-3:
APPLICABILITY: A Planned Unit Development can be developed in
PROCESS:
Pre-application meeting: The applicant shall complete a pre-application
conference with the Director or designee prior to submittal of an application
for a planned unit development. The meeting should be held well in advance
of the preparation of the planned unit development application, A draft site
plan and preliminary plat map (if required) shall be available at the meeting.
Application Requirements: An application, map requirements, and fees, in
accord with Chapter 5 administration of this Title shall be submitted to the
Director,
1. At the discretion of the Director and/or City Engineer, appropriate
supplementary information may also be required to sufficiently detail the
proposed development within any special development area, including but
Chapter 7 PLANNED UNIT DEVELOPMENTS
6,
2
8/29/05
not limited to, hillside, planned unit development, floodplain, cemetery,
manufactured home parks, or hazardous or unique areas of development.
Phasing plans shall be included in the application if the project is to be
phased.
2, A site amenity plan shall be provided with the planned unit development
application.
C.
Concurrent review: Concurrent review of other applications may be required
as determined by the Director, In cases where subdivision platting would be
necessary, concurrent review of preliminary plat is required.
D,
Public hearing requirements: All planned unit development applications shall
comply with the public notice and hearing procedures in accord with Chapter
5 administration of this Title.
E.
Decision: In accord with Chapter 5 administration of this Title, a decision on
a planned unit development is made by the City Council based on the
recommendations of the Planning and Zoning Commission.
11-7-4: STANDARDS: The Council may approve planned unit developments,
upon recommendation by the Commission, in accord with the following standards:
A.
General use standards:
1. Deviations from underlying district requirements: Deviations from the
development standards and/or area requirements of the district in accord
with Chapter 2 DISTRICT REGULATIONS of this Title may be approved. The
exception is that along the periphery of the planned development, the
applicable setbacks as established by the district shall not be reduced,
2, Allowed uses: Applicant may request that specific conditional or accessory
use(s) allowed in the district be allowed as principal permitted use(s).
3. The uses within the planned unit development are interconnected through
a system of roadways and/or pathways as appropriate. Private streets and
service drives may be permitted, if designed and constructed to the
Transportation Authority standards and in accord with Chapter 3 Article F,
PRIVATE STREETS of this Title.
4. Buildings shall be clustered to preserve scenic or environmentally sensitive
areas in the natural state, or to consolidate small open spaces into larger,
more usable areas for common use and enjoyment.
Private open space: In addition to the common open space and site amenity
requirements as set forth in Chapter 3 regulations applying to all districts of
this Title, a minimum of eighty (80) square feet of private, usable open
space shall be provided for each residential unit. This requirement can be
Chapter 7 PLANNED UNIT DEVELOPMENTS
8/29/05
satisfied through porches, patios, decks, and enclosed yards. Landscaping,
entryway and other access ways do not count toward this requirement.
C.
Residential use standards:
1, Multifamily: Notwithstanding the provisions of Chapter 2 DISTRICT
REGULATIONS of this Title, multifamily dwellings may be an allowed use
when approved through a planned unit development.
2. Housing types: A variety of housing types shall be included within a single
planned development, including attached units (townhouses, duplexes),
detached units (patio homes), single-family and multifamily units,
regardless of the district classification of the site, provided that the overall
density limit of the district is maintained,
3, Density formula: Residential density in a planned development shall be
calculated by multiplying the net residential area (gross acreage less the
area of nonresidential uses) by the maximum number of dwelling units per
acre allowed for the district in which the site is located,
4, A residential density bonus may be given for dedications of land for public
use such as school, park, fire station or recreational facility provided to the
public entity by donation or at a cost less than, or equal to, the applicant's
predevelopment cost for that land, The bonus shall be proportional to the
amount of land being dedicated, For example, if ten percent (10%) of the
total property is being dedicated, the density bonus shall be ten percent
(10%). However, is no case shall the bonus exceed twenty-five percent
(25%) of the units permitted by the district.
D.
Infill Planned Developments: Properties of five (5) acres or less within the
City of Meridian, that are located in areas already substantially developed (at
least eighty percent (80%) of the land area within three hundred feet (300')
of the boundaries of the parcel). Upon recommendation of the Commission,
the Council may approve exceptions to other sections of this chapter as an
incentive for infill development as follows:
1, The decision-making body may allow up to a twenty-five percent (25%)
increase in the density permitted for the district in which the site is located.
2, The decision-making body may also waive one or more of the amenity
requirements set forth in Section 11-7-4 of this chapter depending on the
size and scale of the planned development.
E.
In approving the planned development, the Council may prescribe
appropriate conditions additional conditions, bonds, and safeguards in
conformity with this Title that:
1, Minimize adverse impact of the use on other property.
3
Chapter 7 PLANNED UNIT DEVELOPMENTS
4
8/29/05
2. Control the sequence and timing of the use.
3, Control the duration of the use.
4. Assure that the use and the property in which the use is located is
maintained properly.
5, Designate the exact location and nature of the use and the property
development.
6, Require the provision for on-site or off-site public facilities or services.
7. Require more restrictive standards than those generally required in this
Title.
8, Require mitigation of adverse impacts of the proposed development upon
service delivery by any political subdivision, including school districts,
which provides services within the City,
11-7-5: REQUIRED FINDINGS: Upon recommendation from the
Commission, the Council shall make a full investigation and shall, at the public
hearing, review the application. In order to grant a planned development request,
the Council shall make the following findings:
A.
The planned unit development demonstrates exceptional high quality in site
design through the provision of cohesive, continuous, visually related and
functionally linked patterns of development, street and pathway layout, and
building design,
B.
The planned unit development preserves the significant natural, scenic
and/or historic features.
C,
The arrangement of uses and/or structures in the development does not
cause damage, hazard, or nuisance to persons or property in the vicinity,
D,
The internal street, bike and pedestrian circulation system is designed or the
efficient and safe flow of vehicles, bicyclists and pedestrians without having
a disruptive influence upon the activities and functions contained within the
development, nor place an undue burden upon existing transportation and
other public services in the surrounding area.
E.
Community facilities, such as a park, recreational, and dedicated open
space areas are functionally related and accessible to all dwelling units via
pedestrian and/or bicycle pathways,
F.
The proposal complies with the density and use standards requirements in
accord with Chapter 2 district regulations of this Title,
Chapter 7 PLANNED UNIT DEVELOPMENTS
..,~
8/29/05
G,
The amenities provided are appropriate in number and scale to the
proposed development.
H,
The planned unit development is in conformance with the comprehensive
plan.
11-7-6: TIME LIMITATIONS: The time limitations and extensions as set forth
for conditional uses in Section 11-5B-6F of this Title shall also apply to planned unit
developments,
11-7-7: MODIFICATIONS: The modification provisions as set forth for
conditional uses in Section 11-5B-6G of this Title shall also apply to planned unit
developments,
5
Chapter 7 PLANNED UNIT DEVELOPMENTS
EXHIBIT A-LIST OF PROPOSED CHANGES
I.) Add Article H: Development along State and Federal Highways to Table of
Contents,
2.) Add new section on Code Enforcement: 11-1-10. Change all references to Section
6-1-6 to Sections 11-1-10 through 11-1-12, Discussed as substantive change.
3.) Modify all the dimensional standard tables for the residential districts to include
street landscaping buffers for collector and arterial streets. These were mistakenly
left offthe tables when we relocated the street buffer standards. This is discussed
as a substantive change.
4.) Correct reference in 11-2B-2C to read: "Table 11-2B-l.J.."
5.) Modify Table 11-2D-l: Dimensional Standards in the TN-R District: replace
"private drive" with "private street" and delete "with 26' clearance to structures,"
The rear setback will create a 30-foot clearance to structures,
6.) Clarify measurement of clear vision triangle (Section 11-3A-5A1 & 2): "the area
defined by measuring from the intersection of the edge of pœy'cmcnt the travel lane
(excluding parking and sidewalk) a distance of.. " "..from the intersection of the
pr-epcrty adjacent kJ the TYHJthvey edfle of the travel lane and the corner o.lthe
driveway or alley twentyfeet (20') along the roadway and ten feet (10') along the
driveway or alley. "
7.) Relocate fence standards for micro-paths and common opens space to Section 11-
3A-7A7: Fences: Regulationfor fences along micro paths and common open
space areas are set forth in Article B, LlNDSCff'/NG R:EQWREME:"'TS Scctien 1! 3B
12 of this Chaptcrbelow:
a, The develover is resvonsible for constructing fences ad;acent to micro
vath connections to distinfluish common from private areas.
b. Fences ad;acent to micro pathways and common oven svace shall be:
i, An open vision fence uv to six feet (6') in heiflht, as it provides
visibility from adiacent homes or buildinfls; or
ii, 1f closed vision fencinfl is used, it shall not exceed four feet (4 ')
in heiflht. This does not allow four feet (4 ') of closed vision fence with two
feet (2 ') of oven vision fencinfl,
c. Intent: These restrictions are intended to avvlv to interior common open
svace areas and micro paths. Thev are not intended to apply to street
buffers or entrywav landscavinfl strips, These restrictions are not intended
to require fencinfl on interior common oven svace.
8.) Delete Section 11-3A- 7 All because it is no longer necessary: See Sectiel1 !! 3A
8 før additienal fencing FCfJ1Ûremcnts akmg pathways.
9.) Clarify residential fence standards in Section 11-3A- 7C2&3: "The maximum
fence height in the required front yard. " "On corner properties, the maximum
fence height in the street side yard shall be six feet (6') above the grade at the
property line, and the minimum setback shall be ten feet (10') from the street side
property line, See Fiflure 5"
10,) Delete fence regulations from multi-use and micro-pathways Section 11-3A-8G
because they have been relocated in the fence section. Subsection H will become
Subsection G.
Exhibit A--Ust of Proposed Changes page 1
11.) Add two subsections to 11-3A-1O: Noxious Use: "G. Hazardous materials: All
hazardous material storage must comply with the regulations and standards of
the Fire Department. H Noise: Noise shall be subject to the provision o.lSecfion
6-3-6 o.lthe Meridian City Code,"
12.) Correct elTor on 11-3A-12B: "trash Ddumpsters.., "
13.) Change required width of parkway planter to reflect ACHD' s concems
regarding sidewalk maintenance and road maintenance over time: "E. The
minimum width of a-parkways shall be eight 4.We-feet Œ~'). The width can be
measured.from the back of curb ,..,hen it C6ln be demonstrated tJ16lt where there is
no like Iv opportunity /òr expansion of the street section within the right-of-way.
The parkway width shall exclude the width of the sidewalk. Only Cl-ass II t7<CCS
l'/16l)' be p!:6lntcd in parkways less than ten feet (10') in width. Class II trees are the
preferred parkwav trees, Class I and Class III trees mar be considered for
parkwav planters durin~ the landscape plan review. The Director shall evaluate
sueh trees for their suitabilitv as parkwav planter trees based on ultimate tree
canopv. root characteristics. and branching height. The minimum parkwav
planter for Class I and Class III trees shall be ten feet (10'). F. The planter width
for Class II trees mav be reduced to six feet (6') if there are root barriers that are
a minimum of eÙzhteen inches (18") below sub-grade adjacent to the sidewalk
and a minimum of twenty-four inches (24") below sub-grade adjacent to the curb,
The root barriers shall extend two inches (2 ") above grade, " This is discussed as
a substantive change.
14.) Add standards for street tree placement to reflect ACHD's concerns regarding
sidewalk and road maintenance over time in Section 11-3B- 7C3: "d. Where street
trees are within a parkwav. thev shall be centered within the parkwav planter,
Where street trees are not within a parkwav, thev shall be off-set a minimum of
five feet (5') from the edge of sidewalk." This is discussed as a substantive change.
15,) ColTect elTor onI1-3B- 7C5a: "Authority's Jfive-year..."
16.) Clarify when parking lot reconstruction is required in Section 11-3B-8. Add
statement to non-conforming use definition to include nonconforming parking lot
design and landscaping standards. Delete 11-3B-8B2. The thresholds for
conforming to the new standards are the same, so this is not discussed as a
substantive change.
17.) Correct error on 11-3B-8B2b: "P12erimeter and Rr.ight-of-way blandscaping"
18.) Re-title and amend Section 11-3B-9: LANDSCAPE BUFFERS TO
RESIDENTIAL AND NON-INDUSTRIAL BETWEEN Lf..:Þ-!D USES:
Subsection A: Purpose: The requirements in this section shall apply to the
landscape buffer to residential uses Table 11-2B-3 and the landscape buffer to
non-industrial uses Table 11-2C-3.
19.) Remove redundancy in Section 11-3B-I1Cl&6: "The l1l6lximum sl-opc sh6l11 be
~" "Slopes shall be less than or equal to 3: 1 (horizontal: vertical) .for
accessibility and maintenance. "
20.) Clarify sand as acceptable material in Section 11-3B-I1C3: "Gravel, rock, sand.
or cobble ..."
21.) COlTect number format in Section 11-3B-ll C7: "within twentv-four (241
hours... "
Exhibit A--List of Proposed Changes page 2
22.) Correct reference in Section l1ø3B-12C8: "See Section 11-3A-18G ..."
23,) Add rcfcrcnce to sidewalks with regard to ADA compliance: "to ensure that the
parking lot design and sidewalk and/or access provisions meets-.... "
24.) Consider amendment to Table llø3C~2: REQUIRED PARKING SPACES FOR
RESIDENTIAL USE: Currently requires two off-street parking in an enclosed
garage for multi-family units with more than 1 bedroom, Also consider
requirement for guest parking facilities, Discussed under substantive changes.
25.) Consider amendment to Section 11-3C-6B with regard to parking standards for
nonresidential uses. "There shall be ne specified standard for required off street
vehicle J3arhing spaces far nanfcsidential uscs, The following standards shall
applv for off-street vehicle varkinz for nonresidential uses: In all Commercial
Districts and Traditional Neizhborhood Districts the reQuirement shall be one (1)
space for every five hundred (500) square feet of gross floor area. In all
Industrial District the reQuirement shall be one (1) space for every two thousand
(2,000) square feet of zross floor area. " Discussed under substantive changes.
26.) Correct references in Section 11-3D-3J: Off-premise signs, except as permitted
in Sections 11-3D-6C1A6, 11-3D-8GD, and 11-3D-2.8H."
27.) Add provisions for a 15 day temporary sign permit in Section 11-3D-6A6a: 'for
fìfteen (15). thirty (30), sixty (60), or ninety (90) day time periods, "
28.) Consider allowing temporary off-premise signs that are no greater than six
square feet in area in Section 11-3D-6C New subsection 5: Temvorarvoff.
premise sizn that meets the following standards: a, A maximum of one (J) such
sizn vel' vroverty shall be displaved at anv one time, The sign shall be considered
as a temporary sizn and shall be included in the application of Section 11-3D-
6A6a. b. The backzround area shall not exceed six (6) square feet. c. The
applicant shall provide the notarized consent of the property owner. Discussed
under substantive changes.
29.) Remove Figure 10. Figures 11 and 12 portray identical information.
30,) Consider amendments to the private street requirements in Chapter 3 Article F
to increase the authority of the Fire Marshal and to address "mews" developments
similar to that proposed for the "Parkside Units" in the Messina Meadows.
Discussed under substantive changes.
31,) Consider amendments to Chapter 3 Article H: DEVELOPMENT ALONG
FEDERAL AND STATE HIGHWAYS as proposed by the Process Improvement
Group. Discussed under substantive changes.
32.) Consider separation standards for drive-through establishments in Section 11-4-
3.11: "A drive-through establishment shall be an accessory use where the location
is not within 300 feet of another drive-through establishment or &ae:> net adjoin a
residential district or an existing residence. Otherwise a Conditional Use Permit
is required. " Discussed under substantive changes.
33,) Remove size standards for schools in Section 11-4-3,13D: "The desirable size
for education institution should be asjOllows: Ef.c1'l1cntary: 61.000 ta 71,000
squaT::: fret; .:Middle Scheel: 120,000 te 130,000 sqliare feet; and High School:
250,000 te 260,000 square feet.
Exhibit A--List of Proposed Changes page 3
34.) Take out requirement that adult entertainment establishment maintain a buffer
from a park or public building in Section 11-4-3,151 d. Such separation standards
are not supported by state law.
35.) Modify text with regard to decision-making authority: "In the case of
concurrent applications a permit requiring action from more than one decision
body, the applications {3crmits shall be combined and the decision-making body
with the highest authority shall be responsible for all decisions (excludinf!
variance and vacation applications. "
36.) Modify table to be consistent with text and current practices with regard to
decision-making authority.
APPLICATION RECOMMENDING BODY DECISION.MAKING BODY PROCESS
Accessory use for day care, family None D N
Accessory use, home occupation with None Q t!
customers or clients
Accessory use, home occupation with None D A
no customers or clients
Comprehensive Plan Amendment PZ CC PH
Director modification to an approved None Q ð
conditional use
.~ ~" "~.~;. C'~~~..L . . ", . ,;I;~I
Time extension Director None D A
Time extension. Commission or Council Q Same decision-maker as PH
initial approval
Plat final modification to note D CC A
Plat, final D CC A-PM
Vacations, all others D CC PMß#
Check on others. Add PM = Public Meeting to notes section.
Table 11-SA-1: DECISION-MAKING AUTHORITY BY APPLICATION:
37.) Add sub-section on administrative notice: 11-5A-4A: "Where notice is required.
the Director shall notifv propertv owners within 100 feet of'the subject propertv. "
The existing sub-sections would be renumbered.
38.) Add new Section on Comprehensive Plan Amendments as 11-5B-3. Following
sections would be renumbered. This is discussed as a substantive change.
39.) Take out unnecessary word in Section 11-6B-5Ac: "...on prøpcrtypreviously
platted property... "and add a common to Section 11-6B-5Ad: "No new street
dedication, excluding widening of an existing street.. is involved."
40,) Allow for common driveways to be approved at final plat stage in Section 11-
6C-3D7: "For any plats using a common driveway, the setbacks, building
envelope, and orientation of the lots and structures shall be shown on the
preliminary and/or final plat, "
41,) Figures are currently numbered consecutively, but tables are not. Renumber
Figures to include the title, chapter, article, and number reference. For example,
Figure 11 would become Figure 11-3D-2.
Exhibit A--List of Proposed Changes page 4
EXHIBIT B-ENFORCEMENT
11-1-10:
VIOLATIONS:
A.
It is a violation of the Unified Development Code for any person to initiate or
maintain or cause to be initiated or maintained the use of anv structure. land or
real property within the City of Median without first obtaininq proper permits or
authorizations required for the use bv this Title,
B,
It is a violation of the Unified Development Code for any person to use. construct.
locate. demolish or cause to be used. constructed. located. or demolished any
structure. land or property within the Citv of Meridian in any manner that is not
permitted by the terms of any permit or authorization issued pursuant to this Title
or previous codes.
C.
It is a violation of the Unified Development Code for any person to not complv
with specific conditions of approval as stated in a Certificate of Zoninq
Compliance. Conditional Use Permit. Final Plat. or Planned Development as set
forth in this Title.
D.
It is a violation of the Unified Development Code to misrepresent any material
fact in any application. plans or other information submitted to obtain any land
use authorization as set forth in this Title.
E.
It is a violation of the Unified Development Code for anyone to fail to comply with
the requirements of the development code. as set out in the specific sections of
this Title.
11-1-11:
CODE ENFORCEMENT:
A.
B.
Duty to Enforce:
1. It shall be the duty of the Planninq Director to interpret this Title.
2. It shall be the duty of the Code Enforcement Division of the Police Department to
enforce the requlations of this Tile. as set forth in Section 6-1-6 of the Meridian
City Code, Code Enforcement officers may call upon the services of the planninq.
fire. parks or other appropriate city departments to assist in enforcement.
3, It is the intent of this Title to place the obliqation of complyinq with its
requirements upon the owner, occupier or other person responsible for the
condition of the land and buildinqs within the scope this Title,
Investiaation:
1. The code enforcement officer shall investiaate any structure or use which he or
she reasonably believes does not comply with the standards and requirements of
this Title.
Exhibit a-Enforcement page 1
2. If. after investiqation. it is determined that the standards or requirements of this
Title have been violated. a code enforcement officer shall serve a notice of
violation upon the owner. tenant or other person responsible for the condition.
The notice of violation shall state separately each standard or requirement
violated: shall state what corrective action. if anv. is necessary to comply with the
standards or requirements: and shall set a reasonable time for compliance. The
notice shall state that anv further violation mav result in criminal prosecution
and/or civil penalties.
3. The notice shall be served upon the owner. tenant or other person responsible
for the condition bv personal service. reqistered mail. or certified mail with return
receipt requested addressed to the last known address of such person. If. after a
time and effort is made to serve or mail notice without success. then notice may
be made by publication in the newspaper of record for the City of Meridian, The
Code Enforcement officer will record all efforts made to effect service in person
or bv mail as part of their investiaative report,
C.
Extension of Compliance Date:
1. The Plannina Director mav grant a reasonable extension of time for compliance
with anv notice or order. whether pendinq or final. upon findinq that substantial
proaress toward compliance has been made and that the public will not be
adverselv affected by the extension. Such extension of time shall not exceed one
hundred and eiqhtv (180) davs.
2, An extension of time may be revoked bv the Plannina Director if it is shown that
anv of the following are true: the conditions at the time the extension was aranted
have chanced. the Code Enforcement officer determines that a partv is not
performinq corrective actions as aqreed and so notifies the Plannina Director. or
if the extension creates an adverse effect on the public, The date of revocation
shall then be considered as the compliance date,
11-1-12:
PENAL TIES:
A.
A violation of the provisions of this Title is declared a Misdemeanor, Anv person
violatinq or failina to comply with any of the provisions of this Title shall be
subiect to criminal prosecution and upon conviction shall be fined in a sum not
exceedina one thousand dollars ($1.000.00) or be imprisoned for a term not
exceedina six (6) months or be both fined and imprisoned, Each day of
noncompliance with any of the provisions of this Title shall constitute a separate
offense,
B.
Notwithstanding the provisions of Subsection A above. the Citv Attornev. at his or
her sole discretion. may civilly prosecute anv violation of this Code and seek all
available remedies that may include. but are not limited to abatement of the non~
compliant conditions. revocation of existina permits for non-compliance. civil
damaaes for enforcement. or any other remedv as allowed bv law.
Exhibit B-Enforcement page 2
C.
The City may file a lien upon any real property owned by convicted person if they
fail to comply with the penalty as set forth in this Section.
Exhibit a-Enforcement page 3
EXHIBIT C-PRIV A TE STREETS
Add definition: mews: Dwelling units built around a common open space area or court
where the units face the open space area and are generally not accessed from a public
street.
11-3F-1: PURPOSE: The regulations of this Article are intended to provide better
circulation and safety within commercial, industrial, mews, and multifamily developments by
establishing a clear emergency vehicle travel lane and private street name addressing for
properties that do not have internal public roads. It is not the intent to approve private streets for
single-family, duplex and/or townhouse developments other than those that face a common
mews. The applicability may be extended where the Director or Fire Marshall determines that
private streets will enhance the safety of the development. The Fire Marshall may require
desiQnation of a private street within existinq developments where it is in the best interest of the
public safety and health to be able to better locate a qiven property in the event of an
emerqency,
11-3F-2: APPLICABILITY: The provisions of this section shall apply to any properties that
do not have frontage on a public street or where frontage is not required.
11-3F-4: STANDARDS: All private streets shall be designed and constructed to the
following standards.
A.
Design standards:
1, Easement: The private street shall be constructed on a perpetual ingress/egress
easement or a single platted lot that provides access to all applicable properties,
2. Connection point: Where the point of connection of the private street is to a public
street, the private street shall be approved by the Transportation Authority.
3, Emergency vehicle: The private street shall provide sufficient maneuvering area for
emergency vehicles as determined and approved by the Meridian Fire Department.
4. Gates: Gates or other obstacles shall not be allowed,
B.
Construction standards:
1, For conversion of an existina facility to a private street at the direction of the Fire
Marshall:
a, All drive aisles shall be posted as fire lanes with no parkinQ allowed.
b, If a curb exists next to the drive aisle. it shall be painted red,
2, For all other private streets:
Exhibit C-Private Streets page 1
a. Roadway and storm drainage: The private street shall be constructed in accord
with the roadway and storm drainage standards of the Transportation Authority or
as approved by the City of Meridian based on plans submitted by a certified
engineer.
b. Street width: The private street shall be constructed within the easement and
shall have a travel lane width of twenty-six (26) feet.
c, Sidewalks: A five-foot (5') attached sidewalk or four-foot (4') detached sidewalk
shall be provided on one side of the street in commercial districts. This
requirement may be waived if the applicant can demonstrate that an alternative
pedestrian path exists,
d, Fire lanes: all drive aisles shall be posted as fire lanes with no parking allowed. In
addition, if a curb exists next to the drive aisle, it shall be painted red,
2, Alternative compliance: Upon recommendation of the City Engineer and Fire Marshall,
the Director may approve, or recommend approval of alternative design or construction
standards when the applicant can demonstrate that the proposed overall design meets
or exceeds the intent of the required standards of this Article and shall not be
detrimental to the public health, safety, and welfare.
Exhibit C-Private Streets page 2
EXHIBIT E-COMPREHENSIVE PLAN AMENDMENTS
11-5B-7: COMPREHENSIVE PLAN AMENDMENTS:
A
Purpose: The purpose of this section is to establish procedures for
amendments to the text and map components of the adopted
Comprehensive Plan of the City of Meridian.
B.
Applicability: The provisions of this section shall apply to any
Comprehensive Plan Amendment application,
C.
Process:
1. Comprehensive Plan Amendment initiated by the City, The Planninq
and Zoninq Commission may propose to amend the Comprehensive
Plan followina notice and public hearina procedures in Article A
GENERAL PROVISIONS of this Chapter and the hearinq procedures in
Section 67-6509 of the Idaho Code.
2, Comprehensive Plan Amendment initiated by a property owner. The
applicant shall complete a pre-application conference with the Director
prior to submittal of an application for a Comprehensive Plan
Amendment. An application and fees. in accord with Article A
GENERAL PROVISIONS of this Chapter. shall be submitted to the
Director on forms provided bY the Department.
3, The application deadlines for amendments to the land Use Map
component of the Comprehensive Plan shall be June 15 and
December 15 of every year, Amendments to the text component of
the Plan may be submitted at any time, The Commission may
recommend amendments to the land Use Map component of the
Comprehensive Plan not more frequently than every six (6) months.
Amendments to the text of the Comprehensive Plan may be
recommended by the Commission at any time.
4. The Commission. prior to recommendinq the adoption. amendment.
or repeal of the Comprehensive Plan to the Council. shall conduct at
least one public hearinq in accordance with Article A GENERAL
PROVISIONS of this Chapter and in accordance with the procedures in
Section 67-6509 of the Idaho Code.
D.
Required Findinas: Upon recommendation from the Commission. the
Council shall make a full investiqation and shall. at the public hearinQ.
review the application. In order to qrant an amendment to the
Comprehensive Plan. the Council shall make the followinq findinqs:
1. The proposed amendment is consistent with the other elements of the
Comprehensive Plan.
Exhibit E-Comprehensive Plan Amendments page 1
,
2. The proposed amendment provides an improved quide to future
qrowth and development of the city,
3. The proposed amendment is internally consistent with the Goals.
Objectives and Policies of the Comprehensive Plan and the
Comprehensive Plan land Use Map.
4, The proposed amendment is consistent with the Unified Development
Code.
5, The proposed amendment is in the best interest of the City of
Meridian.
Exhibit E-Comprehensive Plan Amendments page 2
--....;..0--- - --:- ---c '.