The URL can be used to link to this page

Home My WebLink Aboutsp-05-137 The Pulse Running & ServicesCITY 4F MERIDIAN Mir BU DINGDEPARTMENT 660 E. Watertower Ln., Ste. 150, Meridian, ID 83642 -Phone 887-2211 /Fax 887-1297 COMMERCIAL SIGN PERMIT APPLICATION r 0��i ,� �, i•� --J (/ fes, w 1. Legal Description: Lot ;Block .Subdivision A CQ 2. Street Address (city will assign if new construction): .-3V 00 - f �,,. r -%4 6v- t, r.> 1.4,A'D t '� 9 3. Owner:f tI C) Phone 1--�-'l 4. Sign Contractor: Phone Pax: �rv_6 s�gv Address: 2 A—t 5. Electrical Contractor (f d fferent than sign contractor) t , %,,� �� ?o, - hone: Electrical Contractor must have an electrical license to Rook-up/install any and all electrical signs. d. Project Name: ---r , -�,, ,a., ,r---�►t1 7. I hereby submit this Commercial Sign Permit Application to construct or install: ❑ New commercial free-standing sign(s). Number of signs ❑ Illuminated (must obtain electrical permit) — Va ue of electrical portion only: $ ,,'New commercial wall sign(s). Number of signs 00 ,A,<,Illuminated (must obtain electrical permit) - Value of electricalortion only: $ 4 p �' ❑ Planned sign program. Number of signs * Complete Planned Sign Program application form 8. Value of sign(s) $_,j4c-� � (excluding cost of installation) Required Plans and Specifications ('lease submit two 0 copies of the following): • Complete text to appear on sign (business name, logo, sub -titles, etc.) including size & lettering style (font). • Overall sign dimensions (including base, wall area, background area) �► Construction materials • Sign and lettering colors -- include color samples or paint chips • Exact, scaled location of sign on property or building. Include building elevations, property lines & any adjacent sidewalks, rights of way from center of streets, landscaping, screening. Comments: DECLARATION: I hereby certify that I have completed this application in a true and correct manner. All City of Meridian ordinances will be complied with whether specified herein or not. The granting of a permit does not presume to give authority to violate or cancel and state or local law regulating construction. Si re of Owner or Owner uthorized Agent OFFICE USE ONLY r Sign Permit Fee: $ or Planning & Zoning Approval: Date: 74?V_� Building Department Approval: Date: c�-ate 1967, City of Meridian SIGN PERMIT Application & Ordinance Checklist Applicant: '4 �-� Submittal Date: V l 2-1 / 0-5 Project Name: 1 t U6_ - — Item No. Description Comments 1. Com leted and -signed sign permit application form. 2. The sign permit application shall include the following: All signs (wall & free-standing): a. Scaled architectural details and building elevations. b. Complete text to appear on sign (business name, logo, sub -titles, etc.), including size and lettering style. C. All sign dimensions (including base, wall area, background area). (verify sign complies w/ requirements in table) CL Construction materials. e. Colors of sign & lettering (/ 3. Free-standing & Planned Sign Program signs only: a. Landsca in details for sign base area. b. Site Plan information (location of buildings, parking lots, driveways, overhead power lines, right-of-way lines, etc.) c. Proposed location of each present and future sign of any type (incidental signs need not be shown). d. Any signs on contiguous, shared -frontage properties within 25 -feet of proposed sign(s). e. Verify sign will not be erected in the same horizontal plane with other signs unless spaced at least 25 ft. apart. (Section 11-14-5.D) 4. If sign is adjacent to residentially zoned lot, verify setbacks are met (based on setbacks of the residential zone) (Section 11-14-5.E) S. Verify sign is not in sight triangle unless at a height of less than 3 -feet or greater than 10 -feet to the bottom of the sign display surface. (Section 11-14-5.F) 6. Verify pole support structures are covered and that design & building materials of the sign complement the architectural theme of the building. (Section 11-14-S.K) 7. Verify free-standing signs are set entirely within a landscaped area having at least the same square footage as the background area of the sign. (Section 11-14-5.L 8. Verify that all free-standing signs (except residential subdivisions) include the street address(es) of the subject parcel. (Section 11-14-5.M) 9. Verify the following standards that apply to all wall signs: a. Sign shall not exceed 18% of wall area (up to a maximum of 75 sq. ft. in L-0) If property also has free-standing sign, wall sign shall not exceed 9% of wall area_ b. Sip is not to exceed the height of the wall face (maximum of 30 ft.) C. Lettering within the copy area shall not exceed a height of 3 ft. d. Each business in office, commercial or industrial zones with exterior frontage shall be permitted (1) wall sign. One additional wall sign shall be Ll- permitted per exterior building wall under the conditions below, provided there is no more than one wall sign on each side of building. 1. Sign background area may be borrowed from that allowed on the building wall facing the street; 2. Sign background area is a maximum of 9% of the building wall; 3. Adjoining property is zoned commercial or industrial. t� e. Direct illumination wall signs are prohibited. f Animation, flashing lights, reader boards and revolving signs are j prohibited- g. 9- Design of the sign, including color scheme, shall be compatible with the wall face. 10. Free-standing signs & wall signs within 300 ft. of I-84 right-of-way shall comply with the following standards: d a. Only (1) wall sign oriented to I-84 is allowed per business or tenant in a building that is occupied by two or more tenants. (Not more than 2 freeway -oriented wall signs allowed on any single building or structure). %V b. Free standing signs shall not exceed 40 ft. in height. C. Free-standing signs shall be 1 sq. ft. of sign area per linear foot of freeway frontage up to a max. of 150 sq. ft. d. Minimum distance between free-standing signs is 500 ft. e. No residential signs are permitted. l * NOTE: This checklist doesnot represent alI elements of the Sign Ordinance. It is only intended to highlight those required elements common to most sign applications and to facilitate review & compliance with the Sign Ordinance's key elements. ROUTER CUT ALUMINUM PAINTED STUD MOUNTED TO WALL LED HALO LIT BACK LIT FORMED CAN WITH FLOUKES( TU5E5 ACRYLIC FACE WITH 3M VIN" WALL FRONTAGE 26'X15 ' TOTAL SQ FT 390' SIGN TOTAL 8.4% LETTERING HEIGHT 20 " WALL JD AND BRUSHED ALUMINUM FIGURE BACK LIT CAN5 WITH LED5 ACRYLIC FACE5 WITH 3M VINYL MATERIAL: ALUMINUM AND STEEL FORMED CANS WITH ACRYLIC FACES AND 3M VINYL COLORS DIABOND (ALUMINUM WITH PLASTIC CORE FIGURE) FLOURESCENT TUBES AND LOW VOLTAGE ZEDS FOR INTERIIOR LIT COMPONENTS BY: � F / �. �n,��Q:Q4 IF ter'_ •a . . .= 'L rSize: 4 ,�=$�O� _ 846-8600-- i EXTERIOR SIGNAGE WALL MOUNTED 50" x 96" Overall Sq/Ft: 32.8 Date: 10114105 Notes: Copyright Notice This drawing and all reproductions thereof are the property of Bryantideas Inc. and may not be reproduced, published, changed or used in any way without written consent. POWER MUST BE PROVIDED TO BACK OF SIGN BY OTHERS. SIGN IS THE PROPERY OF BRYANTIDEAS UNTIL PAID IN FULL. OWNERS SIGNATURE: