HomeMy WebLinkAboutEmail from Barry Teppola
Tará Greèn
From: Steve Siddoway [skldowas@meridlanclly.org]
Sent: Wednesday, September 01,2004 5:09 PM
To: Tara Green'; 'Jessica Johnson'; bergw@cì.meridian.id.us
Cc: 'Bill Nichols (E-mail)'; 'Anna Canning'
Subject: FW: Leeshire
Follow Up Flag: Follow up
Flag Status: Flagged
Attached are proposed conditions of approval from the appUcant based on agreements made at their neighborhood meetings per
the message below. Please include it in the packets for Council.
Thank you,
Stave Siddoway
----------
Steve Siddoway
Principal Planner
Meridian Planning & Zoning
660 E. Watertower Lane, Suite 202
Meridian, Idaho 83642
Phone 208.884.5533
Fax 208.888.6854
---original Message-----
From: Barry Teppola [mallto:bteppola@legendidaho,<XIIT1]
Sent: Wednesday, September 01, 2004 4:56 PM
To: Steve Siddoway (Meridian CIty E-Mail)
Cc: Shawn Nickel
Subject: Leeshire
Steve,
We have held three neighborhood meetings and have negotiated various additional conditions (the last meeting was on the
evening of August 31~. The attached Additional Subdivision Conditions include the some modification to the seven conditions
presented at the P&Z meeting plus additional conditions we are willing to accept on this project.
AIö1ough this is not all of the conditions requ85ted by the neighbors, we have tried to accept all that we felt would accomplish their
goals by assuring them of the quaUIy of the homes.
I have sent a copy of this list to the Vienna Woods board and they were going to distribute as necessary to the interested parties.
I understand you have received another Ust from someone else which may have some of the same items. Please be assured, the
attached fist is the va6d conditions we are willing to accept.
If you have any questions or comments, please call me at 672-1222.
Thank you,
Barry Teppola
9/2/2004
Leeshire Subdivision
Additional Subdivision Conditions
File: AZ-04-017
File: PP-04-024
file: CUP-Q4-026
5)
6)
7)
1)
The trees in the 5 foot planting strip between the back of curb
and the sidewalk shall be planted by the developer. The
grass shall be installed by the builder upon completion of the
home conslruction, or upon a reasonable date when weather
permits.
The builder shall be required to install all front yard
landscaping. The builder will provide to the developer either
(i) a full front and rear landscape plan with a grading plan or
(ii) a grading plan for the all areas which are not landscaped.
The builder and the homeowner will be required to maintain
the grading plan to assure appropriate drainage controls.
2)
3)
The minimum roof material shall be 30 year architectural
shingles.
4)
All exterior siding shall be hardboard, cottage lap, shingles or
similar material, stucco or stone. The architectural guidelines
will not allow vinyl siding.
For all lots which are less than 8,000 square feet, at least
25% of the home's front elevation will be required to have
stucco, stone, masonry or other exterior architectural feature
to match the elevation theme of each home.
The common area fence design (four feet of windowpane with
two feet of open design) will be required as the fence design
on any portion which is parallel to the streets and shall be set
back a least two feet behind the front of the home.
The fence separating the limited office parœls and the
residential portion of the property, and the fence abutting the
front entrance park shall be vinyl, wrought iron or masonry.
8)
The berm between the limited office parcels and Locust Grove
Road will have an average height of five feet, measured from
the Locust Grove edge of pavement.
9)
The minimum home house size shall be 1,600 square feet.
10) The homes shall have a minimum roof pitch of 6:12 for the
main roof structure. The main roof structure shall exclude all
gables, hips, shed-roof gables or porches.
11) The homes shall have a minimum of three roof lines. The roof
lines are defined as breaks in the roof providing set-backs or
variances in height, changes in pitch, changes in direction of
the roof, gables, shed-roof gables and hips.
12) The lots with zero-Iot line set-backs are for the purpose of
attaching the garage structures only.