HomeMy WebLinkAboutSouthridge Sub. 1SUBDIVISION RESTRICTION FORM
Southridge Subdivision No. 1 Planner: Sonya
Dimensional Standards:
C-C Standard Requirement
Front setback (ft.) 0
Rear setback (ft.) 0
Interior side setback (ft.) 0
Street landscape buffer (ft.)
Local (S. Spanish Sun Way) 10
Arterial (W. Overland Rd. & S. Linder Rd.) 25
Maximum building height (ft.) (as defined by the Building Code) 50
Note: Where a street landscape buffer is required, the building cannot encroach within the buffer.
TN-C Standard Requirement
Maximum building height (ft.) (as defined by the Building Code) 45
Minimum number of stories for new construction adjacent to any street 2
Maximum building footprint (s.f.) (over 20,000 requires a CUP) 20,000
R-8 Standard Requirement
Rear setback (ft.) 12
Interior side setback (ft.) (In some cases, there may be a greater setback due to a wider utility
easement - refer to the recorded plat for specific easement information.) 5
Street setback1
to garage (ft.) 20
Street setback1
to living area (ft.) 15
Maximum building height (ft.) (as defined by the Building Code) 35
Minimum living area (s.f.) NA
Note: 1
Measured from back of sidewalk or property line where there is no adjacent sidewalk.
Dimensional Standards TN-R
Minimum front setback:
For alley accessed properties1 (in feet) 10
For street accessed properties1 (in feet) 20 to garage
10 to living area
Minimum rear setback:
For alley accessed properties1 (in feet) 20 to garage if alley width 16 feet
18 to garage if alley width 20 feet
For street accessed properties1 (in feet) 12
Minimum side setback (in feet):
Property lines adjoining unattached walls 5
Property lines adjoining attached walls2 0
Minimum side street setback1 (in feet):
Alley 10
Local street 10
Street landscape buffer (in feet):
Local3 8 parkway with class II trees
Maximum height to eave providing roof access (in feet) 30
Maximum building height (in feet) 40
Notes:
1. Measured from back of sidewalk and/or alley right of way as applicable.
2. On any given property, there shall be no more than 2 property lines that have 0 foot setbacks.
3. Measured from back of curb.
4. These are standards for properties where the front yard of the property adjoins the street landscape buffer and the
units take access from an alley.
5. These are standards for properties where the rear or side yard of the property adjoins the street landscape buffer.
Parking Standards for Dwellings [duplex & single-family (detached, attached, townhouse)]:
Number of Bedrooms
(per unit) Required Parking Spaces
1
1 2 per dwelling unit; at least 1 in an enclosed garage, other space may be enclosed or a
minimum 10’ x 20’ parking pad2
2/3/4 4 per dwelling unit; at least 2 in an enclosed garage, other spaces may be enclosed or a
minimum 10’ x 20’ parking pad2
5+ 6 per dwelling unit; at least 3 in an enclosed garage, other spaces may be enclosed or a
minimum 10’ x 20’ parking pad2
Notes:
1The size of the garage or carport required for dwelling units shall be measured by exterior dimensions & shall be
at least 10’ x 20’ for a 1 space garage or carport and 20’ x 20’ for a 2 space garage or carport.
2The parking pad shall be measured from the edge of sidewalk or edge of paved travel lane (public street, private
street, or alley) where no sidewalk exists.
Fencing (UDC 11-3A-7): All proposed fencing in residential districts shall comply with the following:
Maximum fence height allowed 6’
Front yard 3’ solid or 4’ open vision fencing
Street side yard 3’ solid or 4’ open vision fence at the property line or 6’ fence set back 10’
from property line
Rear yard 6’ (unless adjacent to interior common area or pathway – see below)
Fencing adjacent to interior common
lot or pathway (side or rear) 4’ solid or 6’ open vision fence (6’ solid is prohibited)
Rear yard fence of alley accessed
property & alley side yard properties Open vision fencing set back 5’ from property line.